AETEST - reference manual online

Aegis test results file format.

aetest(5)                                                                               aetest(5)

NAME aetest - aegis test results file format
DESCRIPTION The default configuration of the test_command and development_test_command commands of the project config file (see aepconf(5) for more information) is for the test commands to test a single test file and a single architecture at a time. On some systems, this is not efficient. When configured to run multiple simultaneous tests, or multiple simultaneous architecā€ tures, a file of the format described here is used to communicate the test results back to Aegis.
CONTENTS Use a separate row for each unique filename and architecture combination. test_result = [ { ... } ]; All the fields are mandatory. file_name = string; This is the name of the file being tested. Use the same filename as was given to the test command. exit_status = integer; This is the exit status returned by the test. architecture = string; This is the architecture which the test was run on. Defaults to the architecture of the current system if not set. (Try to avoid setting this field unless you have a very clever multi-architecture test system.)
SEE ALSO aet(1) run tests aegis(5) aegis file format syntax aepconf(5) Project configuration file format.
AUTHOR Peter Miller E-Mail: /\/\* WWW:
Reference Manual Aegis aetest(5)
This manual Reference Other manuals
aetest(5) referred by aepconf(5) | aet(1)
refer to aegis(5) | aepconf(5) | aet(1)