SIMPLE SOLUTIONS

Manual pages

Origin: Linux.

[ Alias ↣ ] Name (section) Brief
a2j(1) Wrapper script to simulate a2jmidid's non-DBUS behaviour though a2jmidid actually being in DBUS mode.
a2j_control(1) Utility to control a2jmidid daemon.
a2jmidi_bridge(1) Static bridge with one ALSA playback port and one JACK MIDI input port.
a2jmidid(1) JACK MIDI daemon for ALSA MIDI.
a68g(1) Algol 68 Genie, an Algol 68 compiler-interpreter.
accept(2) Accept a connection on a socket.
accept4(2) ↣ accept(2) Accept a connection on a socket.
access(2) Check user's permissions for a file.
account-server.conf(5) Configuration file for the openstack-swift account server.
acct(2) Switch process accounting on or off.
acct(5) Process accounting file.
add_key(2) Add a key to the kernel's key management facility.
adjtime(3) Correct the time to synchronize the system clock.
adjtimex(2) Tune kernel clock.
aespipe(1) AES encrypting or decrypting pipe.
afs_syscall(2) ↣ unimplemented(2)
aio(7) POSIX asynchronous I/O overview.
aio_init(3) Asynchronous I/O initialization.
aj-snapshot(1)
alarm(2) Set an alarm clock for delivery of a signal.
alevt(1x) X11 Teletext browser.
alfred(8) Almighty Lightweight Fact Remote Exchange Daemon.
alfred-gpsd(8) Alfred GPS distribution server.
alloc_hugepages(2) Allocate or free huge pages.
amispammer(1) The way to know if your MX IPs are blacklisted.
aprsmon(8) Monitor APRS AX.25 traffic for javAPRS.
arch_prctl(2) Set architecture-specific thread state.
arm_fadvise(2) ↣ posix_fadvise(2) Predeclare an access pattern for file data.
arm_fadvise64_64(2) ↣ posix_fadvise(2) Predeclare an access pattern for file data.
arm_sync_file_range(2) ↣ sync_file_range(2) Sync a file segment with disk.
armscii-8(7) Armenian character set encoded in octal, decimal, and hexadecimal.
arp(7) Linux ARP kernel module.
ascii(7) ASCII character set encoded in octal, decimal, and hexadecimal.
asp(1) Find an host IP address by its name.
astraceroute(8) Autonomous system trace route utility.
atexit(3) Register a function to be called at normal process termination.
atmaddr(8) List and maintain local ATM addresses.
atmarp(8) Administer classical IP over ATM connections.
atmarpd(8) ATMARP demon.
atmdiag(8) Show ATM device driver diagnostics.
atmdump(8) Capture or generate ATM cells.
atmloop(8) Get/set loopback mode of ATM interfaces.
atmsigd(8) ATM signaling demon.
atmsigd.conf(4) Configuration file for the ATM signaling demon.
atmtcp(8) Set up ATM over TCP connections.
attributes(7) POSIX safety concepts.
aufs(5) Advanced multi layered unification filesystem. version 4.x-rcN-20160111.
autolog(8) Log out idle users.
autolog.conf(5) Configuration file for the autolog command.
avibox(1) Merge multimedia files into an AVI file.
away(1) Terminal locking program.
awayrc(5) Configuration file for Away.
ax25(3) AX25 Address manipulation.
ax25(4) AX.25 amateur packet radio protocol family.
ax25_aton(3) ↣ ax25(3) AX25 Address manipulation.
ax25_aton_arglist(3) ↣ ax25(3) AX25 Address manipulation.
ax25_aton_entry(3) ↣ ax25(3) AX25 Address manipulation.
ax25_call(8) Make an AX.25, NET/ROM, ROSE or TCP connection.
ax25_cmp(3) ↣ ax25(3) AX25 Address manipulation.
ax25_ntoa(3) ↣ ax25(3) AX25 Address manipulation.
ax25_validate(3) ↣ ax25(3) AX25 Address manipulation.
ax25d(8) General purpose AX.25, NET/ROM and Rose daemon.
ax25d.conf(5) Ax25d configuration file.
ax25ipd(8) AX.25 into IP Encapsulator.
ax25ipd.conf(5) Control the operation of ax25ipd.
ax25mond(8) Dump the AX.25 network traffic and and provide sockets where the received data will be retransmitted.
ax25mond.conf(5) Specify the sockets which axcall will provide.
ax25rtctl(8) AX.25 routing control program.
ax25rtd(8) AX.25 routing daemon.
ax25rtd.conf(5) Ax25 routing daemon configuration file.
axcall(1) Make an AX.25, NET/ROM or Rose connection.
axctl(8) Configure/Kill running AX.25 connections.
axdigi(8) Axdigi file.
axgetlist(1) Read the message list from the BBS.
axgetmail(1) Automatically download messages from the F6FBB BBS.
axgetmsg(1) Download selected messages from F6FBB BBS.
axgetput(1) Upload or download files via AX.25 / axspawn Linux login session.
axlisten(1) Monitor AX.25 traffic.
axmail(8) A powerful but simple SMTP plugin for URONode.
axmail.conf(5) A powerful but simple SMTP plugin for URONode.
axparms(8) Configure AX.25 interfaces.
axports(5) AX.25 port configuration file.
axspawn(8) Allow automatic login to a Linux system.
axspawn.conf(5) Control the operation of axspawn.
batadv-vis(8) Batman-adv visualization server.
batctl(8) B.A.T.M.A.N. advanced control and management tool.
bauble(1) Software application to manage a collection of botanical specimens.
bauble-admin(1) Create bauble's database and change some of its properties.
bcmp(3) Compare byte sequences.
bcopy(3) Copy byte sequence.
bdflush(2) Start, flush, or tune buffer-dirty-flush daemon.
beacon(8) Transmit periodic messages on an AX.25 port.
bget(1) ↣ axgetput(1) Upload or download files via AX.25 / axspawn Linux login session.
bind(2) Bind a name to a socket.
biosinfo(8) Shows type, revision and vendor of the mainboard as well as vendor version and release date of the.
bitz-server(1) An ICAP server.
bitz-server.conf(5) Bitz-server configuration file.
blockfinder(1) Enumerates network information for countries.
boot(7) System bootup process based on UNIX System V Release 4.
bootparam(7) Introduction to boot time parameters of the Linux kernel.
bootstrap_firmware(8) Detect hardware for use with a package manager.
bpf(2) Perform a command on an extended BPF map or program.
bpfc(8) A Berkeley Packet Filter assembler and compiler.
bpqparms(8) Configure BPQ ethernet devices.
bput(1) ↣ axgetput(1) Upload or download files via AX.25 / axspawn Linux login session.
break(2) ↣ unimplemented(2)
brk(2) Change data segment size.
bus(8) ↣ les(8) ATM LAN Emulation service demons.
bzero(3) Write zero-valued bytes.
cachefilesd.conf(5) Local file caching configuration file.
cacheflush(2) Flush contents of instruction and/or data cache.
capabilities(7) Overview of Linux capabilities.
capget(2) Set/get capabilities of thread(s).
capset(2) ↣ capget(2) Set/get capabilities of thread(s).
cat_nvram(8) Dumps the contents of nvram to STDOUT.
cciss(4) HP Smart Array block driver.
cfgetispeed(3) ↣ termios(3)
cfgetospeed(3) ↣ termios(3)
cfmakeraw(3) ↣ termios(3)
cfsetispeed(3) ↣ termios(3)
cfsetospeed(3) ↣ termios(3)
cfsetspeed(3) ↣ termios(3)
cgclassify(1) Move running task(s) to given cgroups.
cgclear(1) Unload the cgroup filesystem.
cgconfigparser(8) Setup control group file system.
cgcreate(1) Create new cgroup(s).
cgdelete(1) Remove control group(s).
cgexec(1) Run the task in given control groups.
cgget(1) Print parameter(s) of given group(s).
cgred.conf(5) Libcgroup configuration file.
cgrules.conf(5) Libcgroup configuration file.
cgrulesengd(8) Control group rules daemon.
cgset(1) Set the parameters of given cgroup(s).
cgsnapshot(1) Generate the configuration file for given controllers.
charsets(7) Character set standards and internationalization.
chdir(2) Change working directory.
chmod(2) Change permissions of a file.
chown(2) Change ownership of a file.
chown32(2) ↣ chown(2) Change ownership of a file.
chroot(2) Change root directory.
cifsiostat(1) Report CIFS statistics.
cldump(1) Clarion database extractor.
clearenv(3) Clear the environment.
clips(1) An expert system programming language.
clock_getcpuclockid(3) Obtain ID of a process CPU-time clock.
clock_nanosleep(2) High-resolution sleep with specifiable clock.
clone(2) Create a child process.
clone2(2) ↣ clone(2) Create a child process.
__clone2(2) ↣ clone(2) Create a child process.
close(2) Close a file descriptor.
closelog(3) ↣ syslog(3) Send messages to the system logger.
cloudprint(1) Share CUPS printers with Google Cloud Print.
cloudprint-service(7) Manage the Google Cloud Print proxy.
cloudprintd(1) Share CUPS printers with Google Cloud Print.
clsync(1) Live sync tool, written in GNU C.
cmsg(3) Access ancillary data.
CMSG_ALIGN(3) ↣ cmsg(3) Access ancillary data.
CMSG_DATA(3) ↣ cmsg(3) Access ancillary data.
CMSG_FIRSTHDR(3) ↣ cmsg(3) Access ancillary data.
CMSG_LEN(3) ↣ cmsg(3) Access ancillary data.
CMSG_NXTHDR(3) ↣ cmsg(3) Access ancillary data.
CMSG_SPACE(3) ↣ cmsg(3) Access ancillary data.
coldreboot(8) Force a cold reboot bypassing kexec-tools default.
colors(3) Libbash library for setting tty colors.
concalc(1) Console calculator.
connect(2) Initiate a connection on a socket.
console(4) Console terminal and virtual consoles.
console_codes(4) Linux console escape and control sequences.
console_ioctl(4) Ioctls for console terminal and virtual consoles.
container-server.conf(5) Configuration file for the openstack-swift container server.
convert-dtsv0(1) Device Tree Compiler -- Conversion to Version 1.
core(5) Core dump file.
cp1251(7) CP 1251 character set encoded in octal, decimal, and hexadecimal.
cp1252(7) CP 1252 character set encoded in octal, decimal, and hexadecimal.
cppman(1) C++ manual page viewer / fetcher.
cps-auth(1) Perform OAuth2 authentication for cloudprint-service.
CPU_ALLOC(3) ↣ CPU_SET(3)
CPU_ALLOC_SIZE(3) ↣ CPU_SET(3)
CPU_AND(3) ↣ CPU_SET(3)
CPU_AND_S(3) ↣ CPU_SET(3)
CPU_CLR(3) ↣ CPU_SET(3)
CPU_CLR_S(3) ↣ CPU_SET(3)
CPU_COUNT(3) ↣ CPU_SET(3)
CPU_COUNT_S(3) ↣ CPU_SET(3)
CPU_EQUAL(3) ↣ CPU_SET(3)
CPU_EQUAL_S(3) ↣ CPU_SET(3)
CPU_FREE(3) ↣ CPU_SET(3)
CPU_ISSET(3) ↣ CPU_SET(3)
CPU_ISSET_S(3) ↣ CPU_SET(3)
CPU_OR(3) ↣ CPU_SET(3)
CPU_OR_S(3) ↣ CPU_SET(3)
CPU_SET(3)
CPU_SET_S(3) ↣ CPU_SET(3)
CPU_XOR(3) ↣ CPU_SET(3)
CPU_XOR_S(3) ↣ CPU_SET(3)
CPU_ZERO(3) ↣ CPU_SET(3)
CPU_ZERO_S(3) ↣ CPU_SET(3)
cpuid(4) X86 CPUID access device.
cpuset(7) Confine processes to processor and memory node subsets.
cqrlog(1) Advanced logging program for hamradio operators.
cramfsswap(1) Swap endianess of a cram filesystem (cramfs).
creat(2) ↣ open(2) Open and possibly create a file.
create_module(2) Create a loadable module entry.
credentials(7) Process identifiers.
crrcsim(1) A model-airplane flight simulation program.
crtmpserver(1) Is a high performance streaming platform written on C++.
ctop(1) Command line / text based Linux Containers monitoring tool.
curvetun(8) A lightweight curve25519 ip4/6 tunnel.
ddp(7) Linux AppleTalk protocol implementation.
DebianNet(3pm) Create, remove, enable or disable entry in /etc/inetd.conf.
delete_module(2) Unload a kernel module.
dictfmt_index2suffix(1) Creates a .suffix file from a DICTD database .index file.
dictfmt_index2word(1) Creates a .word index file from a DICTD database .index file.
dictunformat(1) Create a raw database file from a .dict and .index file.
dirfd(3) Get directory stream file descriptor.
dispersion.conf(5) Configuration file for the openstack-swift dispersion tools.
dkopp(1) Copy files to DVD or BD (Blue-ray) media.
dladdr(3) Translate address to symbolic information.
dladdr1(3) ↣ dladdr(3) Translate address to symbolic information.
dlclose(3) ↣ dlopen(3) Open and close a shared object.
dlerror(3) Obtain error diagnostic for functions in the dlopen API.
dlinfo(3) Obtain information about a dynamically loaded object.
dlmopen(3) ↣ dlopen(3) Open and close a shared object.
dlopen(3) Open and close a shared object.
dlsym(3) Obtain address of a symbol in a shared object or executable.
dlvsym(3) ↣ dlsym(3) Obtain address of a symbol in a shared object or executable.
dmascc_cfg(1) Configure dmascc devices.
dmsetup(8) Low level logical volume management.
dnshistory(1) Processes various log file formats doing dns IP Address lookups. Store these pairs in a database.
dsp56k(4) DSP56001 interface device.
dtc(1) Device Tree Compiler.
dtdiff(1) Compare two different device-tree.
dumprtp(1) Get an RTP unicast/multicast/broadcast stream and output it.
dup(2) Duplicate a file descriptor.
dup2(2) ↣ dup(2) Duplicate a file descriptor.
dup3(2) ↣ dup(2) Duplicate a file descriptor.
duplocale(3) Duplicate a locale object.
dutch(5) A list of Dutch words.
dvbstream(1) Transmit a DVB transport stream via RTP.
dvdcpy(1) Copy selected data from dvd.
ebook2cw(1) Convert ebooks to Morse code audio files (MP3/OGG).
ebook2cwgui(1) Graphical user interface for ebook2cw (text to Morse converter).
ed2k-link(1) ↣ rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
eject(1) Eject removable media.
ekiga(1) SIP and H.323 Voice over IP and Videoconferencing for UN*X.
elf(5) Format of Executable and Linking Format (ELF) files.
enjarify(1) Translate Dalvik to Java bytecode.
environ(7) User environment.
epoll(7) I/O event notification facility.
epoll_create(2) Open an epoll file descriptor.
epoll_create1(2) ↣ epoll_create(2) Open an epoll file descriptor.
epoll_ctl(2) Control interface for an epoll descriptor.
epoll_pwait(2) ↣ epoll_wait(2) Wait for an I/O event on an epoll file descriptor.
epoll_wait(2) Wait for an I/O event on an epoll file descriptor.
err(3) Formatted error messages.
errx(3) ↣ err(3) Formatted error messages.
esi(8) Get or set the end system identifier (ESI).
espctag(1) Edit tags of SPC files (ID666).
eventfd(2) Create a file descriptor for event notification.
eventfd2(2) ↣ eventfd(2) Create a file descriptor for event notification.
execve(2) Execute program.
execveat(2) Execute program relative to a directory file descriptor.
exit(2) ↣ _exit(2) Terminate the calling process.
_exit(2) Terminate the calling process.
_Exit(2) ↣ _exit(2) Terminate the calling process.
exit(3) Cause normal process termination.
exit_group(2) Exit all threads in a process.
express.conf(5) Configuration file for OpenShift.
faccessat(2) ↣ access(2) Check user's permissions for a file.
fadvise64(2) ↣ posix_fadvise(2) Predeclare an access pattern for file data.
fadvise64_64(2) ↣ posix_fadvise(2) Predeclare an access pattern for file data.
faifa(8) Configure HomePlug 1.0/AV devices.
fallocate(2) Manipulate file space.
fanotify(7) Monitoring filesystem events.
fanotify_init(2) Create and initialize fanotify group.
fanotify_mark(2) Add, remove, or modify an fanotify mark on a filesystem object.
fapg(1) Fast Audio Playlist Generator.
fattach(2) ↣ unimplemented(2)
fchdir(2) ↣ chdir(2) Change working directory.
fchmod(2) ↣ chmod(2) Change permissions of a file.
fchmodat(2) ↣ chmod(2) Change permissions of a file.
fchown(2) ↣ chown(2) Change ownership of a file.
fchownat(2) ↣ chown(2) Change ownership of a file.
fcntl(2) Manipulate file descriptor.
fcntl64(2) ↣ fcntl(2) Manipulate file descriptor.
fd(4) Floppy disk device.
fdatasync(2) ↣ fsync(2) Synchronize a file's in-core state with storage device.
fdetach(2) ↣ unimplemented(2)
fdtdump(1) Prints a readable version of a flat device-tree file.
fdtget(1) Read values from device-tree.
fdtput(1) Write a property value to a device-tree.
feature_test_macros(7) Feature test macros.
feclearexcept(3) ↣ fenv(3)
fedisableexcept(3) ↣ fenv(3)
feenableexcept(3) ↣ fenv(3)
fegetenv(3) ↣ fenv(3)
fegetexcept(3) ↣ fenv(3)
fegetexceptflag(3) ↣ fenv(3)
fegetround(3) ↣ fenv(3)
feholdexcept(3) ↣ fenv(3)
fenv(3)
feraiseexcept(3) ↣ fenv(3)
fesetenv(3) ↣ fenv(3)
fesetexceptflag(3) ↣ fenv(3)
fesetround(3) ↣ fenv(3)
fetestexcept(3) ↣ fenv(3)
feupdateenv(3) ↣ fenv(3)
fexecve(3) Execute program specified via file descriptor.
fiaif(8) FIAIF is an Intelligent Firewall.
fiaif-getdev(8) Retrieve interface data and print information to standard out.
fiaif-scan(8) Print syslog entries in human readable form.
fiaif-update(8) Tests for new version and updated reserved_networks file.
fiaif.conf(5) Fiaif global configuration file.
fifo(7) First-in first-out special file, named pipe.
filesystems(5) Linux filesystem types: ext, ext2, ext3, ext4, hpfs, iso9660, JFS, minix, msdos, ncpfs nfs,.
find_key_by_type_and_name(3) Find a key by type and name.
finit_module(2) ↣ init_module(2) Load a kernel module.
flexd(8) FlexNet polling daemon.
flexd.conf(5) Flexd configuration file.
flock(2) Apply or remove an advisory lock on an open file.
flowblade(1) Non-Linear Video Editor.
flowtop(8) Top-like netfilter TCP/UDP/SCTP/DCCP/ICMP(v6) flow tracking.
fopencookie(3) Opening a custom stream.
fork(2) Create a child process.
fort77(1) Invoke f2c Fortran translator transparently, like a compiler.
fotoxx(1) Photo/image editor and collection manager.
free_hugepages(2) ↣ alloc_hugepages(2) Allocate or free huge pages.
freedroid(6) A free Paradroid clone.
freehostent(3) ↣ getipnodebyname(3) Get network hostnames and addresses.
freelocale(3) ↣ newlocale(3) Create, modify, and free a locale object.
french(5) A list of french words.
fs(5) ↣ filesystems(5) Linux filesystem types: ext, ext2, ext3, ext4, hpfs, iso9660, JFS, minix, msdos, ncpfs nfs,.
fstat(2) ↣ stat(2) Get file status.
fstatat(2) ↣ stat(2) Get file status.
fstatfs(2) ↣ statfs(2) Get filesystem statistics.
fstatvfs(3) ↣ statvfs(3) Get filesystem statistics.
fsync(2) Synchronize a file's in-core state with storage device.
ftm(7) ↣ feature_test_macros(7) Feature test macros.
ftpchroot(5) File which lists users who need to be chrooted.
ftruncate(2) ↣ truncate(2) Truncate a file to a specified length.
fts(3) Traverse a file hierarchy.
fts_children(3) ↣ fts(3) Traverse a file hierarchy.
fts_close(3) ↣ fts(3) Traverse a file hierarchy.
fts_open(3) ↣ fts(3) Traverse a file hierarchy.
fts_read(3) ↣ fts(3) Traverse a file hierarchy.
fts_set(3) ↣ fts(3) Traverse a file hierarchy.
ftw(3) File tree walk.
full(4) Always full device.
futex(2) Fast user-space locking.
futex(7) Fast user-space locking.
futimes(3) Change file timestamps.
futimesat(2) Change timestamps of a file relative to a directory file descriptor.
fwsnort(8) Firewall Snort.
gaelic(5) A list of Scots Gaelic words.
gai.conf(5) Getaddrinfo(3) configuration file.
galician-minimos(5) A list of Galician words, using the "minimos" standard.
get_kernel_syms(2) Retrieve exported kernel and module symbols.
get_mempolicy(2) Retrieve NUMA memory policy for a thread.
get_robust_list(2) Get/set list of robust futexes.
get_thread_area(2) ↣ set_thread_area(2) Set a GDT entry for thread-local storage.
getcontext(3) Get or set the user context.
getcpu(2) Determine CPU and NUMA node on which the calling thread is running.
getdents(2) Get directory entries.
getdents64(2) ↣ getdents(2) Get directory entries.
getdomainname(2) Get/set NIS domain name.
getdtablesize(2) Get descriptor table size.
getdtablesize(3) Get descriptor table size.
getegid(2) ↣ getgid(2) Get group identity.
getent(1) Get entries from Name Service Switch libraries.
geteuid(2) ↣ getuid(2) Get user identity.
getgid(2) Get group identity.
getgid32(2) ↣ getgid(2) Get group identity.
getgroups(2) Get/set list of supplementary group IDs.
getgroups32(2) ↣ getgroups(2) Get/set list of supplementary group IDs.
gethostid(3) Get or set the unique identifier of the current host.
gethostname(2) Get/set hostname.
getipnodebyaddr(3) ↣ getipnodebyname(3) Get network hostnames and addresses.
getipnodebyname(3) Get network hostnames and addresses.
getitimer(2) Get or set value of an interval timer.
getloadavg(3) Get system load averages.
getmsg(2) ↣ unimplemented(2)
getopts(3) Libbash library for command line parameters parsing.
getpagesize(2) Get memory page size.
getpass(3) Get a password.
getpeername(2) Get name of connected peer socket.
getpgid(2) ↣ setpgid(2) Set/get process group.
getpgrp(2) ↣ setpgid(2) Set/get process group.
getpid(2) Get process identification.
getpmsg(2) ↣ unimplemented(2)
getppid(2) ↣ getpid(2) Get process identification.
getpriority(2) Get/set program scheduling priority.
getrandom(2) Obtain a series of random bytes.
getresgid(2) ↣ getresuid(2) Get real, effective and saved user/group IDs.
getresuid(2) Get real, effective and saved user/group IDs.
getresuid32(2) ↣ getresuid(2) Get real, effective and saved user/group IDs.
getrlimit(2) Get/set resource limits.
getrusage(2) Get resource usage.
getsid(2) Get session ID.
getsockname(2) Get socket name.
getsockopt(2) Get and set options on sockets.
gettid(2) Get thread identification.
gettimeofday(2) Get / set time.
getuid(2) Get user identity.
getuid32(2) ↣ getuid(2) Get user identity.
getunwind(2) Copy the unwind data to caller's buffer.
getutmp(3) Copy utmp structure to utmpx, and vice versa.
getutmpx(3) ↣ getutmp(3) Copy utmp structure to utmpx, and vice versa.
glibc(7) ↣ libc(7) Overview of standard C libraries on Linux.
glob(7) Globbing pathnames.
gnome-gmail(1) Integrate GMail into the GNOME desktop.
gnu_dev_major(3) ↣ makedev(3) Manage a device number.
gnu_dev_makedev(3) ↣ makedev(3) Manage a device number.
gnu_dev_minor(3) ↣ makedev(3) Manage a device number.
gnu_get_libc_release(3) ↣ gnu_get_libc_version(3) Get glibc version and release.
gnu_get_libc_version(3) Get glibc version and release.
goaccess(1) Fast web log analyzer and interactive viewer.
gocr(1) Command line text recognition tool.
gost-hash(1) ↣ rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
gpgdir(1) Recursive directory encryption with GnuPG.
gravit(1) Visually stunning gravity simulator.
group(5) User group file.
gsmc(1) A GTK Smith Chart Calulator for RF impedance matching.
gst-install(1) Installs missing GStreamer plugins.
gtk-recordmydesktop(1) Graphical gtk frontend for recordMyDestkop.
gtty(2) ↣ unimplemented(2)
guess(8) Tries to guess the configuration by comparing four dumps of the NVRAM.
guess-helper(8) Tries to guess the configuration by comparing four dumps of the NVRAM.
gummi(1) LaTeX editor.
gwhois(1) Generic whois client / server.
has160-hash(1) ↣ rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
hashstash(3) Libbash library that implements hash data structure.
hcal(1) Displays a Hebrew / Gregorian calendar.
hd(4) MFM/IDE hard disk devices.
hdate(1) Displays Hebrew date information for a given Gregorian/Julian date.
hier(7) Description of the filesystem hierarchy.
hodie(1) Print current date and time... in Latin.
home_bbs(1) Find home BBS or force a home BBS for the callsign.
host.conf(5) Resolver configuration file.
hostname(7) Hostname resolution description.
hosts(5) Static table lookup for hostnames.
hosts.equiv(5) List of hosts and users that are granted "trusted" r command access to your system.
hotot(7) Lightweight & opensource microbloging client.
hotot-qt(7) Lightweight & opensource microbloging client.
hp-align(1) Printer Cartridge Alignment Utility.
hp-check(1) Dependency/Version Check Utility.
hp-clean(1) Printer Printhead Cleaning Utility.
hp-colorcal(1) Printer Cartridge Color Calibration Utility.
hp-config_usb_printer(1) HP device config using USB.
hp-devicesettings(1) Device Setup Utility.
hp-diagnose_plugin(1) Diagnose Plugin Utility.
hp-diagnose_queues(1) AutoConfig Utility to check queues configuration.
hp-doctor(1) Self Diagnse Utility and Healing Utility.
hp-fab(1) Fax Address Book.
hp-faxsetup(1) Fax Device Setup Utility.
hp-firmware(1) Firmware Download Utility.
hp-info(1) Device Information Utility.
hp-levels(1) Supply Levels Utility.
hp-linefeedcal(1) Printer Line Feed Calibration Utility.
hp-logcapture(1) HPLIP logs capture Utility.
hp-makecopies(1) Make Copies Utility.
hp-makeuri(1) Device URI Creation Utility.
hp-pkservice(1) Policy Kit Service.
hp-plugin(1) Plugin Download and Install Utility.
hp-pqdiag(1) Print Quality Diagnostic Utility.
hp-print(1) Print Utility.
hp-printsettings(1) Printer Settings Utility.
hp-probe(1) Printer Discovery Utility.
hp-query(1) Model Query Utility.
hp-scan(1) Scan Utility.
hp-sendfax(1) PC Sendfax Utility.
hp-setup(1) Printer/Fax Setup Utility.
hp-systray(1) System Tray Status Service.
hp-testpage(1) Testpage Print Utility.
hp-timedate(1) Time/Date Utility.
hp-toolbox(1) HP Device Manager.
hp-wificonfig(1) Wifi Configuration Utility.
hpsa(4) HP Smart Array SCSI driver.
hpset(1) Printer commands.
i3lock(1) Improved screen locker.
icmp(7) Linux IPv4 ICMP kernel module.
idle(2) Make process 0 idle.
ietd(8) ISCSI Enterprise Target Daemon.
ifpps(8) Top-like networking and system statistics.
iipsrv(8) IIPImage Internet Imaging Server.
in.aspd(8) Address Search Protocol Daemon.
inb(2) ↣ outb(2)
inb_p(2) ↣ outb(2)
inet_net_ntop(3) ↣ inet_net_pton(3) Internet network number conversion.
inet_net_pton(3) Internet network number conversion.
inet_ntop(3) Convert IPv4 and IPv6 addresses from binary to text form.
inet_pton(3) Convert IPv4 and IPv6 addresses from text to binary form.
init_module(2) Load a kernel module.
initramfs-tools(8) An introduction to writing scripts for mkinitramfs.
initramfs.conf(5) Configuration file for mkinitramfs.
initrd(4) Boot loader initialized RAM disk.
inl(2) ↣ outb(2)
inl_p(2) ↣ outb(2)
inotify(7) Monitoring filesystem events.
inotify_add_watch(2) Add a watch to an initialized inotify instance.
inotify_init(2) Initialize an inotify instance.
inotify_init1(2) ↣ inotify_init(2) Initialize an inotify instance.
inotify_rm_watch(2) Remove an existing watch from an inotify instance.
insb(2) ↣ outb(2)
insl(2) ↣ outb(2)
install-mbr(8) Install a Master Boot Record manager.
insw(2) ↣ outb(2)
intro(1) Introduction to user commands.
intro(2) Introduction to system calls.
intro(3) Introduction to library functions.
intro(4) Introduction to special files.
intro(5) Introduction to file formats.
intro(6) Introduction to games.
intro(7) Introduction to overview, conventions, and miscellany section.
intro(8) Introduction to administration and privileged commands.
inventory_firmware(8) Detect versions of firmware installed in hardware.
inventory_firmware_gui(8) Graphically inventory and update firmware installed in hardware.
inw(2) ↣ outb(2)
inw_p(2) ↣ outb(2)
io_cancel(2) Cancel an outstanding asynchronous I/O operation.
io_destroy(2) Destroy an asynchronous I/O context.
io_getevents(2) Read asynchronous I/O events from the completion queue.
io_setup(2) Create an asynchronous I/O context.
io_submit(2) Submit asynchronous I/O blocks for processing.
ioctl(2) Control device.
ioctl_fat(2) Manipulating the FAT filesystem.
ioctl_list(2) List of ioctl calls in Linux/i386 kernel.
ioperm(2) Set port input/output permissions.
iopl(2) Change I/O privilege level.
ioprio_get(2) ↣ ioprio_set(2) Get/set I/O scheduling class and priority.
ioprio_set(2) Get/set I/O scheduling class and priority.
iostat(1) Report Central Processing Unit (CPU) statistics and input/output statistics for devices and parti‐.
ip(7) Linux IPv4 protocol implementation.
ipc(2) System V IPC system calls.
ipv6(7) Linux IPv6 protocol implementation.
irish(5) A list of Irish words.
irqbalance(1) Distribute hardware interrupts across processors on a multiprocessor system.
iruserok(3) ↣ rcmd(3) Routines for returning a.
iruserok_af(3) ↣ rcmd(3) Routines for returning a.
isastream(2) ↣ unimplemented(2)
isatty(3) Test whether a file descriptor refers to a terminal.
isfdtype(3) Test file type of a file descriptor.
iso-8859-1(7) ↣ iso_8859-1(7) ISO 8859-1 character set encoded in octal, decimal, and hexadecimal.
iso-8859-10(7) ↣ iso_8859-10(7) ISO 8859-10 character set encoded in octal, decimal, and hexadecimal.
iso-8859-11(7) ↣ iso_8859-11(7) ISO 8859-11 character set encoded in octal, decimal, and hexadecimal.
iso-8859-13(7) ↣ iso_8859-13(7) ISO 8859-13 character set encoded in octal, decimal, and hexadecimal.
iso-8859-14(7) ↣ iso_8859-14(7) ISO 8859-14 character set encoded in octal, decimal, and hexadecimal.
iso-8859-15(7) ↣ iso_8859-15(7) ISO 8859-15 character set encoded in octal, decimal, and hexadecimal.
iso-8859-16(7) ↣ iso_8859-16(7) ISO 8859-16 character set encoded in octal, decimal, and hexadecimal.
iso-8859-2(7) ↣ iso_8859-2(7) ISO 8859-2 character set encoded in octal, decimal, and hexadecimal.
iso-8859-3(7) ↣ iso_8859-3(7) ISO 8859-3 character set encoded in octal, decimal, and hexadecimal.
iso-8859-4(7) ↣ iso_8859-4(7) ISO 8859-4 character set encoded in octal, decimal, and hexadecimal.
iso-8859-5(7) ↣ iso_8859-5(7) ISO 8859-5 character set encoded in octal, decimal, and hexadecimal.
iso-8859-6(7) ↣ iso_8859-6(7) ISO 8859-6 character set encoded in octal, decimal, and hexadecimal.
iso-8859-7(7) ↣ iso_8859-7(7) ISO 8859-7 character set encoded in octal, decimal, and hexadecimal.
iso-8859-8(7) ↣ iso_8859-8(7) ISO 8859-8 character set encoded in octal, decimal, and hexadecimal.
iso-8859-9(7) ↣ iso_8859-9(7) ISO 8859-9 character set encoded in octal, decimal, and hexadecimal.
iso_8859-1(7) ISO 8859-1 character set encoded in octal, decimal, and hexadecimal.
iso_8859-10(7) ISO 8859-10 character set encoded in octal, decimal, and hexadecimal.
iso_8859-11(7) ISO 8859-11 character set encoded in octal, decimal, and hexadecimal.
iso_8859-13(7) ISO 8859-13 character set encoded in octal, decimal, and hexadecimal.
iso_8859-14(7) ISO 8859-14 character set encoded in octal, decimal, and hexadecimal.
iso_8859-15(7) ISO 8859-15 character set encoded in octal, decimal, and hexadecimal.
iso_8859-16(7) ISO 8859-16 character set encoded in octal, decimal, and hexadecimal.
iso_8859-2(7) ISO 8859-2 character set encoded in octal, decimal, and hexadecimal.
iso_8859-3(7) ISO 8859-3 character set encoded in octal, decimal, and hexadecimal.
iso_8859-4(7) ISO 8859-4 character set encoded in octal, decimal, and hexadecimal.
iso_8859-5(7) ISO 8859-5 character set encoded in octal, decimal, and hexadecimal.
iso_8859-6(7) ISO 8859-6 character set encoded in octal, decimal, and hexadecimal.
iso_8859-7(7) ISO 8859-7 character set encoded in octal, decimal, and hexadecimal.
iso_8859-8(7) ISO 8859-8 character set encoded in octal, decimal, and hexadecimal.
iso_8859-9(7) ISO 8859-9 character set encoded in octal, decimal, and hexadecimal.
iso_8859_1(7) ↣ iso_8859-1(7) ISO 8859-1 character set encoded in octal, decimal, and hexadecimal.
iso_8859_10(7) ↣ iso_8859-10(7) ISO 8859-10 character set encoded in octal, decimal, and hexadecimal.
iso_8859_11(7) ↣ iso_8859-11(7) ISO 8859-11 character set encoded in octal, decimal, and hexadecimal.
iso_8859_13(7) ↣ iso_8859-13(7) ISO 8859-13 character set encoded in octal, decimal, and hexadecimal.
iso_8859_14(7) ↣ iso_8859-14(7) ISO 8859-14 character set encoded in octal, decimal, and hexadecimal.
iso_8859_15(7) ↣ iso_8859-15(7) ISO 8859-15 character set encoded in octal, decimal, and hexadecimal.
iso_8859_16(7) ↣ iso_8859-16(7) ISO 8859-16 character set encoded in octal, decimal, and hexadecimal.
iso_8859_2(7) ↣ iso_8859-2(7) ISO 8859-2 character set encoded in octal, decimal, and hexadecimal.
iso_8859_3(7) ↣ iso_8859-3(7) ISO 8859-3 character set encoded in octal, decimal, and hexadecimal.
iso_8859_4(7) ↣ iso_8859-4(7) ISO 8859-4 character set encoded in octal, decimal, and hexadecimal.
iso_8859_5(7) ↣ iso_8859-5(7) ISO 8859-5 character set encoded in octal, decimal, and hexadecimal.
iso_8859_6(7) ↣ iso_8859-6(7) ISO 8859-6 character set encoded in octal, decimal, and hexadecimal.
iso_8859_7(7) ↣ iso_8859-7(7) ISO 8859-7 character set encoded in octal, decimal, and hexadecimal.
iso_8859_8(7) ↣ iso_8859-8(7) ISO 8859-8 character set encoded in octal, decimal, and hexadecimal.
iso_8859_9(7) ↣ iso_8859-9(7) ISO 8859-9 character set encoded in octal, decimal, and hexadecimal.
issue(5) Prelogin message and identification file.
j2amidi_bridge(1) Static bridge with one ALSA input port and one JACK MIDI output port.
kcmp(2) Compare two processes to determine if they share a kernel resource.
kexec(8) Directly boot into a new kernel.
kexec_file_load(2) ↣ kexec_load(2) Load a new kernel for later execution.
kexec_load(2) Load a new kernel for later execution.
key.dns_resolver(8) Upcall for request-key to handle dns_resolver keys.
keyctl(1) Key management facility control.
keyctl(2) Manipulate the kernel's key management facility.
keyctl(3) Key management function wrappers.
keyctl_assume_authority(3) ↣ keyctl_instantiate(3) Assume the authority to instantiate a key.
keyctl_chown(3) Change the ownership of a key.
keyctl_clear(3) Clear a keyring.
keyctl_describe(3) Describe a key.
keyctl_describe_alloc(3) ↣ keyctl_describe(3) Describe a key.
keyctl_get_keyring_ID(3) Get the ID of a special keyring.
keyctl_get_persistent(3) Get the persistent keyring for a user.
keyctl_get_security(3) Retrieve a key's security context.
keyctl_get_security_alloc(3) ↣ keyctl_get_security(3) Retrieve a key's security context.
keyctl_instantiate(3) Assume the authority to instantiate a key.
keyctl_instantiate_iov(3) ↣ keyctl_instantiate(3) Assume the authority to instantiate a key.
keyctl_invalidate(3) Invalidate a key.
keyctl_join_session_keyring(3) Join a different session keyring.
keyctl_link(3) Link a key to a keyring keyctl_unlink - Unlink a key from a keyring.
keyctl_negate(3) ↣ keyctl_instantiate(3) Assume the authority to instantiate a key.
keyctl_read(3) Read a key.
keyctl_read_alloc(3) ↣ keyctl_read(3) Read a key.
keyctl_reject(3) ↣ keyctl_instantiate(3) Assume the authority to instantiate a key.
keyctl_revoke(3) Revoke a key.
keyctl_search(3) Search a keyring for a key.
keyctl_session_to_parent(3) Set the parent process's session keyring.
keyctl_set_reqkey_keyring(3) Set the implicit destination keyring.
keyctl_set_timeout(3) Set the expiration timer on a key.
keyctl_setperm(3) Change the permissions mask on a key.
keyctl_unlink(3) ↣ keyctl_link(3) Link a key to a keyring keyctl_unlink - Unlink a key from a keyring.
keyctl_update(3) Update a key.
keyrings(7) In-kernel key management and retention facility.
keyutils(7) In-kernel key management utilities.
kill(2) Send signal to a process.
killpg(2) Send signal to a process group.
kissattach(8) Attach a KISS or 6PACK interface.
kissnetd(8) Create a virtual network.
kissparms(8) Configure KISS TNCs.
kmem(4) ↣ mem(4) System memory, kernel memory and system ports.
koi8-r(7) Russian character set encoded in octal, decimal, and hexadecimal.
koi8-u(7) Ukrainian character set encoded in octal, decimal, and hexadecimal.
komparator4(1) Searches and synchronizes two directories.
koules(6) ↣ xkoules(6) Action game for X11.
ksconfig(8) ↣ system-config-kickstart(8) Graphical interface for creating kickstart files.
latin1(7) ↣ iso_8859-1(7) ISO 8859-1 character set encoded in octal, decimal, and hexadecimal.
latin10(7) ↣ iso_8859-16(7) ISO 8859-16 character set encoded in octal, decimal, and hexadecimal.
latin2(7) ↣ iso_8859-2(7) ISO 8859-2 character set encoded in octal, decimal, and hexadecimal.
latin3(7) ↣ iso_8859-3(7) ISO 8859-3 character set encoded in octal, decimal, and hexadecimal.
latin4(7) ↣ iso_8859-4(7) ISO 8859-4 character set encoded in octal, decimal, and hexadecimal.
latin5(7) ↣ iso_8859-9(7) ISO 8859-9 character set encoded in octal, decimal, and hexadecimal.
latin6(7) ↣ iso_8859-10(7) ISO 8859-10 character set encoded in octal, decimal, and hexadecimal.
latin7(7) ↣ iso_8859-13(7) ISO 8859-13 character set encoded in octal, decimal, and hexadecimal.
latin8(7) ↣ iso_8859-14(7) ISO 8859-14 character set encoded in octal, decimal, and hexadecimal.
latin9(7) ↣ iso_8859-15(7) ISO 8859-15 character set encoded in octal, decimal, and hexadecimal.
lchown(2) ↣ chown(2) Change ownership of a file.
ld-musl-config(8) Configures musl dynamic linker path's.
ldbash(1) Dynamic loader for libbash(7) libraries.
ldbashconfig(8) Creates or updates cache file for libbash(7) libraries.
ldraw-mklist(1) Create parts.lst files.
lecs(8) ATM LAN Emulation service demons.
les(8) ATM LAN Emulation service demons.
libbash(7) A bash shared libraries package.
libc(7) Overview of standard C libraries on Linux.
link(2) Make a new name for a file.
linkat(2) ↣ link(2) Make a new name for a file.
linuxinfo(1) Displays system information about system.
listen(2) Listen for connections on a socket.
llseek(2) Reposition read/write file offset.
_llseek(2) ↣ llseek(2) Reposition read/write file offset.
locale(1) Get locale-specific information.
locale(5) Describes a locale definition file.
locale(7) Description of multilanguage support.
localedef(1) Compile locale definition files.
lock(2) ↣ unimplemented(2)
locks(3) Libbash library that implements locking (directory based).
logrotate(8)
logwatch(8) System log analyzer and reporter.
lookup_dcookie(2) Return a directory entry's path.
loop(4) Loop devices.
loop-control(4) ↣ loop(4) Loop devices.
lp(4) Line printer devices.
lphdisk(8) Prepare a hibernation partition for NoteBIOS suspend-to-disk.
lrcalc(1) Calculate with Littlewood-Richardson coefficients.
lscgroup(1) List all cgroups.
lseek(2) Reposition read/write file offset.
lseek64(3) Reposition 64-bit read/write file offset.
lsinitramfs(8) List content of an initramfs image.
lssubsys(1) List hierarchies containing given subsystem.
lstat(2) ↣ stat(2) Get file status.
lutimes(3) ↣ futimes(3) Change file timestamps.
m6pack(8) Attach multiples 6PACK interfaces.
madvise(2) Give advice about use of memory.
madvise1(2) ↣ unimplemented(2)
magnet-link(1) ↣ rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
mailaddr(7) Mail addressing description.
major(3) ↣ makedev(3) Manage a device number.
makedev(3) Manage a device number.
MAKEDEV(8) Create devices.
mallinfo(3) Obtain memory allocation information.
malloc_stats(3) Print memory allocation statistics.
malloc_trim(3) Release free memory from the top of the heap.
mallopt(3) Set memory allocation parameters.
man(7) Macros to format man pages.
man-pages(7) Conventions for writing Linux man pages.
manx(5) A list of Manx Gaelic words.
math_error(7) Detecting errors from mathematical functions.
matherr(3) SVID math library exception handling.
mausezahn(8) A fast versatile packet generator with Cisco-cli.
MB_CUR_MAX(3) Maximum length of a multibyte character in the current locale.
MB_LEN_MAX(3) Maximum multibyte length of a character across all locales.
mbind(2) Set memory policy for a memory range.
mdbus2(1) Interactive DBus introspection, interaction, and monitoring.
mdoc(7) Quick reference guide for the -mdoc macro package.
mem(4) System memory, kernel memory and system ports.
membarrier(2) Issue memory barriers on a set of threads.
memfd_create(2) Create an anonymous file.
messages(3) Libbash library that implements a set of functions to print standard status messages.
mheard(1) Display AX.25 calls recently heard.
mheardd(8) Collect information about packet activity.
migrate_pages(2) Move all pages in a process to another set of nodes.
mincore(2) Determine whether pages are resident in memory.
minor(3) ↣ makedev(3) Manage a device number.
mkdir(2) Create a directory.
mkdirat(2) ↣ mkdir(2) Create a directory.
mkinitramfs(8) Low-level tool for generating an initramfs image.
mkiss(8) Attach a multi KISS interface.
mknod(2) Create a special or ordinary file.
mknodat(2) ↣ mknod(2) Create a special or ordinary file.
mkThumbs(1) Script to create thumbnails from an ogg video file.
mlock(2) Lock and unlock memory.
mlock2(2) ↣ mlock(2) Lock and unlock memory.
mlockall(2) ↣ mlock(2) Lock and unlock memory.
mmap(2) Map or unmap files or devices into memory.
mmap2(2) Map files or devices into memory.
modify_ldt(2) Get or set a per-process LDT entry.
ModuleDtmfRepeater.conf(5) Configuration file for the SvxLink server DTMF Repeater module.
ModuleEchoLink.conf(5) Configuration file for the SvxLink server EchoLink module.
ModuleHelp.conf(5) Configuration file for the SvxLink server Help module.
ModuleParrot.conf(5) Configuration file for the SvxLink server Parrot module.
ModulePropagationMonitor.conf(5) Configuration file for the SvxLink server PropagationMonitor module.
ModuleSelCallEnc.conf(5) Configuration file for the SvxLink server SelCallEnc module.
ModuleTclVoiceMail.conf(5) Configuration file for the SvxLink server TclVoiceMail module.
mon(8) Monitor services for availability, sending alarms upon failures.
moncmd(1) Send commands to mon daemon and show the results.
monshow(1) Show operational status of mon server.
motd(5) Message of the day.
mount(2) Mount filesystem.
mouse(4) Serial mouse interface.
move_pages(2) Move individual pages of a process to another node.
mpcd(8) ATM MPOA (Multi-Protocol Over ATM) client daemon.
mpdscribble(1) A Music Player Daemon (MPD) client which submits information about tracks being played to a.
mpgcat(1) ↣ mpgtx(1) Manipulate mpeg files.
mpgdemux(1) ↣ mpgtx(1) Manipulate mpeg files.
mpginfo(1) ↣ mpgtx(1) Manipulate mpeg files.
mpgjoin(1) ↣ mpgtx(1) Manipulate mpeg files.
mpgsplit(1) ↣ mpgtx(1) Manipulate mpeg files.
mpgtx(1) Manipulate mpeg files.
mprotect(2) Set protection on a region of memory.
mpstat(1) Report processors related statistics.
mpx(2) ↣ unimplemented(2)
mq_close(3) Close a message queue descriptor.
mq_getattr(3) Get/set message queue attributes.
mq_getsetattr(2) Get/set message queue attributes.
mq_notify(3) Register for notification when a message is available.
mq_open(3) Open a message queue.
mq_overview(7) Overview of POSIX message queues.
mq_receive(3) Receive a message from a message queue.
mq_send(3) Send a message to a message queue.
mq_setattr(3) ↣ mq_getattr(3) Get/set message queue attributes.
mq_timedreceive(3) ↣ mq_receive(3) Receive a message from a message queue.
mq_timedsend(3) ↣ mq_send(3) Send a message to a message queue.
mq_unlink(3) Remove a message queue.
mremap(2) Remap a virtual memory address.
msgcleanup(1) Delete the messages with their lifetime exceeded.
msgctl(2) System V message control operations.
msgget(2) Get a System V message queue identifier.
msgop(2) System V message queue operations.
msgrcv(2) ↣ msgop(2) System V message queue operations.
msgsnd(2) ↣ msgop(2) System V message queue operations.
msr(4) X86 CPU MSR access device.
msync(2) Synchronize a file with a memory map.
munlock(2) ↣ mlock(2) Lock and unlock memory.
munlockall(2) ↣ mlock(2) Lock and unlock memory.
munmap(2) ↣ mmap(2) Map or unmap files or devices into memory.
musl-gcc(1) Musl wrapper for gcc.
musl-ldd(1) Print musl shared library depencies.
mxallowd(1) Dynamically whitelist your Mail eXchanger.
name_to_handle_at(2) ↣ open_by_handle_at(2) Obtain handle for a pathname and open file via a handle.
namespaces(7) Overview of Linux namespaces.
nanosleep(2) High-resolution sleep.
nccar(1) ↣ nccgen(1) Source code analysis.
nccc++(1) ↣ nccgen(1) Source code analysis.
nccg++(1) ↣ nccgen(1) Source code analysis.
nccgen(1) Source code analysis.
nccld(1) ↣ nccgen(1) Source code analysis.
NetAnim(1) Network animator based on Qt4 working with ns-3.
netdevice(7) Low-level access to Linux network devices.
netlink(7) Communication between kernel and user space (AF_NETLINK).
netrom(4) NET/ROM amateur packet radio protocol family.
netromd(8) Send and receive NET/ROM routing messages.
netsniff-ng(8) The packet sniffing beast.
newlocale(3) Create, modify, and free a locale object.
news(1) Display system news.
_newselect(2) ↣ select(2) Synchronous I/O multiplexing.
nf2csv(1) Iptables to CSV data.
nfs4_acl(5) NFSv4 Access Control Lists.
nfs4_editfacl(1) ↣ nfs4_setfacl(1) Manipulate NFSv4 file/directory access control lists.
nfs4_getfacl(1) Get NFSv4 file/directory access control lists.
nfs4_setfacl(1) Manipulate NFSv4 file/directory access control lists.
nfsservctl(2) Syscall interface to kernel nfs daemon.
nftw(3) ↣ ftw(3) File tree walk.
nice(2) Change process priority.
nodesave(8) Saves NET/ROM routing information.
nodeusers(1) URONode user information lookup program.
nologin(5) Prevent unprivileged users from logging into the system.
novena-eeprom(8) Novena eeprom editor.
nptl(7) Native POSIX Threads Library.
nrattach(8) Start a NET/ROM interface.
nrbroadcast(5) NET/ROM routing broadcast configuration file.
nrparms(8) Configure the NET/ROM interface.
nrports(5) NET/ROM port configuration file.
nrsdrv(8) KISS to NET/ROM serial converter.
nse(1) Ns in emulation mode to emulate real network.
nss(5) Name Service Switch configuration file.
nsswitch.conf(5) Name Service Switch configuration file.
nstk(1) Ns with tk support.
null(4) Data sink.
numa(7) Overview of Non-Uniform Memory Architecture.
nvram-wakeup(8) A (small) program that can read and write the WakeUp time in the BIOS.
nvram-wakeup.conf(5) The configuration file for NVRAM WakeUp.
nvramtool(1) Read/write coreboot-related information.
object-expirer.conf(5) Configuration file for the openstack-swift object exprier daemon.
object-server.conf(5) Configuration file for the openstack-swift object server.
oggCat(1) Concatenates two ogg video files (.ogv, .ogg or oga).
oggCut(1) Extracts parts of an ogg file (.ogv, .ogg and .oga).
oggDump(1) Prints out information of ogg video files (.ogv, .ogg or oga).
oggJoin(1) Multiplexes ogg streams (.ogv, .ogg or oga).
oggLength(1) Gives the length of an ogg video/audio file.
oggSilence(1) Creates a silence period in vorbis format.
oggSlideshow(1) Creates slideshows from pictures.
oggSplit(1) Demultiplexes ogv files.
oggThumb(1) Creates thumbnails from an ogg video file.
oggTranscode(1) Transcodes ogg files in multiple ways.
oldfstat(2) ↣ stat(2) Get file status.
oldlstat(2) ↣ stat(2) Get file status.
oldolduname(2) ↣ uname(2) Get name and information about current kernel.
oldstat(2) ↣ stat(2) Get file status.
olduname(2) ↣ uname(2) Get name and information about current kernel.
open(2) Open and possibly create a file.
open_by_handle_at(2) Obtain handle for a pathname and open file via a handle.
openat(2) ↣ open(2) Open and possibly create a file.
openlog(3) ↣ syslog(3) Send messages to the system logger.
openshot(1) Non-Linear Video Editor.
openshot-render(1) OpenShot command line renderer.
operator(7) C operator precedence and order of evaluation.
otcldoc(1) Simple script for translating otcl classes into an html hyperlinked document.
otclsh(1) Tcl Shell containing object-oriented scripting language OTcl.
outb(2)
outb_p(2) ↣ outb(2)
outl(2) ↣ outb(2)
outl_p(2) ↣ outb(2)
outsb(2) ↣ outb(2)
outsl(2) ↣ outb(2)
outsw(2) ↣ outb(2)
outw(2) ↣ outb(2)
outw_p(2) ↣ outb(2)
owish(1) Graphical shell containing object-oriented scripting language OTcl.
packet(7) Packet interface on device level.
path_resolution(7) How a pathname is resolved to a file.
pause(2) Wait for signal.
pciconfig_iobase(2) ↣ pciconfig_read(2) Pci device information handling.
pciconfig_read(2) Pci device information handling.
pciconfig_write(2) ↣ pciconfig_read(2) Pci device information handling.
perf_event_open(2) Set up performance monitoring.
perfmonctl(2) Interface to IA-64 performance monitoring unit.
persistent-keyring(7) Per-user persistent keyring.
personality(2) Set the process execution domain.
phys(2) ↣ unimplemented(2)
pid_namespaces(7) Overview of Linux PID namespaces.
pidstat(1) Report statistics for Linux tasks.
pipe(2) Create pipe.
pipe(7) Overview of pipes and FIFOs.
pipe2(2) ↣ pipe(2) Create pipe.
pivot_root(2) Change the root filesystem.
pngnq(1) Quantize png images.
poll(2) Wait for some event on a file descriptor.
port(4) ↣ mem(4) System memory, kernel memory and system ports.
posix_fadvise(2) Predeclare an access pattern for file data.
posix_madvise(3) Give advice about patterns of memory usage.
powerdebug(8) A tool to display regulator and sensor information.
powertop-1.13(8) Program to analyze power consumption on Intel-based laptops.
ppoll(2) ↣ poll(2) Wait for some event on a file descriptor.
prctl(2) Operations on a process.
pread(2) Read from or write to a file descriptor at a given offset.
pread64(2) ↣ pread(2) Read from or write to a file descriptor at a given offset.
preadv(2) ↣ readv(2) Read or write data into multiple buffers.
prlimit(2) ↣ getrlimit(2) Get/set resource limits.
prlimit64(2) ↣ getrlimit(2) Get/set resource limits.
proc(5) Process information pseudo-filesystem.
process-keyring(7) Per-process shared keyring.
process_vm_readv(2) Transfer data between process address spaces.
process_vm_writev(2) ↣ process_vm_readv(2) Transfer data between process address spaces.
procfs(5) ↣ proc(5) Process information pseudo-filesystem.
prof(2) ↣ unimplemented(2)
profil(3) Execution time profile.
protocols(5) Protocols definition file.
proxy-server.conf(5) Configuration file for the openstack-swift proxy server.
psad(8) The Port Scan Attack Detector.
pselect(2) ↣ select(2) Synchronous I/O multiplexing.
pselect6(2) ↣ select(2) Synchronous I/O multiplexing.
pthread_attr_destroy(3) ↣ pthread_attr_init(3) Initialize and destroy thread attributes object.
pthread_attr_getaffinity_np(3) ↣ pthread_attr_setaffinity_np(3) Set/get CPU affinity attribute in thread attributes.
pthread_attr_getdetachstate(3) ↣ pthread_attr_setdetachstate(3) Set/get detach state attribute in thread attributes.
pthread_attr_getguardsize(3) ↣ pthread_attr_setguardsize(3) Set/get guard size attribute in thread attributes.
pthread_attr_getinheritsched(3) ↣ pthread_attr_setinheritsched(3) Set/get inherit-scheduler attribute in thread.
pthread_attr_getschedparam(3) ↣ pthread_attr_setschedparam(3) Set/get scheduling parameter attributes in thread.
pthread_attr_getschedpolicy(3) ↣ pthread_attr_setschedpolicy(3) Set/get scheduling policy attribute in thread.
pthread_attr_getscope(3) ↣ pthread_attr_setscope(3) Set/get contention scope attribute in thread attributes object.
pthread_attr_getstack(3) ↣ pthread_attr_setstack(3) Set/get stack attributes in thread attributes object.
pthread_attr_getstackaddr(3) ↣ pthread_attr_setstackaddr(3) Set/get stack address attribute in thread attributes.
pthread_attr_getstacksize(3) ↣ pthread_attr_setstacksize(3) Set/get stack size attribute in thread attributes.
pthread_attr_init(3) Initialize and destroy thread attributes object.
pthread_attr_setaffinity_np(3) Set/get CPU affinity attribute in thread attributes.
pthread_attr_setdetachstate(3) Set/get detach state attribute in thread attributes.
pthread_attr_setguardsize(3) Set/get guard size attribute in thread attributes.
pthread_attr_setinheritsched(3) Set/get inherit-scheduler attribute in thread.
pthread_attr_setschedparam(3) Set/get scheduling parameter attributes in thread.
pthread_attr_setschedpolicy(3) Set/get scheduling policy attribute in thread.
pthread_attr_setscope(3) Set/get contention scope attribute in thread attributes object.
pthread_attr_setstack(3) Set/get stack attributes in thread attributes object.
pthread_attr_setstackaddr(3) Set/get stack address attribute in thread attributes.
pthread_attr_setstacksize(3) Set/get stack size attribute in thread attributes.
pthread_cancel(3) Send a cancellation request to a thread.
pthread_cleanup_pop(3) ↣ pthread_cleanup_push(3) Push and pop thread cancellation clean-up handlers.
pthread_cleanup_pop_restore_np(3) ↣ pthread_cleanup_push_defer_np(3) Push and pop thread cancellation clean-up han‐.
pthread_cleanup_push(3) Push and pop thread cancellation clean-up handlers.
pthread_cleanup_push_defer_np(3) Push and pop thread cancellation clean-up han‐.
pthread_create(3) Create a new thread.
pthread_detach(3) Detach a thread.
pthread_equal(3) Compare thread IDs.
pthread_exit(3) Terminate calling thread.
pthread_getaffinity_np(3) ↣ pthread_setaffinity_np(3) Set/get CPU affinity of a thread.
pthread_getattr_np(3) Get attributes of created thread.
pthread_getconcurrency(3) ↣ pthread_setconcurrency(3) Set/get the concurrency level.
pthread_getcpuclockid(3) Retrieve ID of a thread's CPU time clock.
pthread_getname_np(3) ↣ pthread_setname_np(3) Set/get the name of a thread.
pthread_getschedparam(3) ↣ pthread_setschedparam(3) Set/get scheduling policy and parameters of a thread.
pthread_join(3) Join with a terminated thread.
pthread_kill(3) Send a signal to a thread.
pthread_kill_other_threads_np(3) Terminate all other threads in process.
pthread_self(3) Obtain ID of the calling thread.
pthread_setaffinity_np(3) Set/get CPU affinity of a thread.
pthread_setcancelstate(3) Set cancelability state and type.
pthread_setcanceltype(3) ↣ pthread_setcancelstate(3) Set cancelability state and type.
pthread_setconcurrency(3) Set/get the concurrency level.
pthread_setname_np(3) Set/get the name of a thread.
pthread_setschedparam(3) Set/get scheduling policy and parameters of a thread.
pthread_setschedprio(3) Set scheduling priority of a thread.
pthread_sigmask(3) Examine and change mask of blocked signals.
pthread_sigqueue(3) Queue a signal and data to a thread.
pthread_testcancel(3) Request delivery of any pending cancellation request.
pthread_timedjoin_np(3) ↣ pthread_tryjoin_np(3) Try to join with a terminated thread.
pthread_tryjoin_np(3) Try to join with a terminated thread.
pthread_yield(3) Yield the processor.
pthreads(7) POSIX threads.
ptiptop(1) Display hardware performance counters for Linux tasks.
ptmx(4) ↣ pts(4) Pseudoterminal master and slave.
ptrace(2) Process trace.
pts(4) Pseudoterminal master and slave.
pty(7) Pseudoterminal interfaces.
pump(8) Configure network interface via BOOTP or DHCP protocol.
putmsg(2) ↣ unimplemented(2)
putpmsg(2) ↣ unimplemented(2)
pv(1) Monitor the progress of data through a pipe.
pwrite(2) ↣ pread(2) Read from or write to a file descriptor at a given offset.
pwritev(2) ↣ readv(2) Read or write data into multiple buffers.
pwrkap_aggregate(5) Configuration file for pwrkap_aggregate.
pwrkap_aggregate(8) Present a large number of pwrkap servers as if they were one.
pwrkap_cli(1) Command line monitor and control program for pwrkap.
pwrkap_gtk(1) Graphical monitor and control program for pwrkap.
pwrkap_main(8) Main pwrkap system daemon.
pwsafe(1) Secure Password Manager.
python2-swift(1) OpenStack Swift client tool.
python3-swift(1) OpenStack Swift client tool.
qasconfig(1) ALSA configuration tree browser.
qashctl(1) Desktop mixer for ALSA's "High level Control Interface".
qasmixer(1) Desktop sound mixer for ALSA.
qlix(1) Manage MTP devices.
qos(7) Quality of Service specification.
qrq(1) High speed Morse telegraphy trainer.
qrqscore(1) ↣ qrq(1) High speed Morse telegraphy trainer.
qsf(1) Quick spam filter.
query_module(2) Query the kernel for various bits pertaining to modules.
quotactl(2) Manipulate disk quotas.
ram(4) Ram disk device.
random(4) Kernel random number source devices.
ratpoints(1) A program to find rational points on hyperelliptic curves.
ratpoints-debug(1) ↣ ratpoints(1) A program to find rational points on hyperelliptic curves.
raw(7) Linux IPv4 raw sockets.
rcmd(3) Routines for returning a.
rcmd_af(3) ↣ rcmd(3) Routines for returning a.
read(2) Read from a file descriptor.
readahead(2) Initiate file readahead into page cache.
readdir(2) Read directory entry.
readlink(2) Read value of a symbolic link.
readlinkat(2) ↣ readlink(2) Read value of a symbolic link.
readv(2) Read or write data into multiple buffers.
reboot(2) Reboot or enable/disable Ctrl-Alt-Del.
recordmydesktop(1) Record desktop sessions to an Ogg-Theora-Vorbis file.
recursive_key_scan(3) Apply a function to all keys in a keyring tree.
recursive_session_key_scan(3) ↣ recursive_key_scan(3) Apply a function to all keys in a keyring tree.
recv(2) Receive a message from a socket.
recvfrom(2) ↣ recv(2) Receive a message from a socket.
recvmmsg(2) Receive multiple messages on a socket.
recvmsg(2) ↣ recv(2) Receive a message from a socket.
remap_file_pages(2) Create a nonlinear file mapping.
remotetrx(1) The SvxLink remote transceiver application.
remotetrx.conf(5) Configuration file for the SvxLink remote transceiver server.
rename(2) Change the name or location of a file.
renameat(2) ↣ rename(2) Change the name or location of a file.
renameat2(2) ↣ rename(2) Change the name or location of a file.
request-key(8) Handle key instantiation callback requests from the kernel.
request-key.conf(5) Instantiation handler configuration file.
request_key(2) Request a key from the kernel's key management facility.
restart_syscall(2) Restart a system call after interruption by a stop signal.
rexec(3) Return stream to a remote command.
rexec_af(3) ↣ rexec(3) Return stream to a remote command.
rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
rhc(1) Command line tool for performing operations related to your OpenShift account.
rhn-channel(8) ↣ spacewalk-channel(8) Subscribe to or unsubscribe system from channel.
rhn-profile-sync(8) Update system information on Red Hat Network.
rhn_check(8) Check for and execute queued actions on RHN.
rhn_register(8) Connect to RHN Satellite or Red Hat Network Classic.
rhnreg_ks(8) A program for non interactively registering systems to RHN Satellite or Red Hat Network Classic.
rhnsd(8) A program for querying the Red Hat Network for updates and information.
rhosts(5) Grants or denies password-free r-command access to a specific user account.
rinetd(8) Internet “redirection server”.
rip98d(8) Send and receive RIP98 routing messages.
rip98d.conf(5) Control RIP98 routing messages.
rmdir(2) Delete a directory.
rmligs-german(1) Remove incorrectly used ligatures from German LaTeX documents.
robustirc-bridge(1) Bridge between IRC and RobustIRC.
rolldice(6) Rolls virtual dice.
rose(3) ROSE Address manipulation routines.
rose(4) Rose amateur packet radio protocol family.
rose_aton(3) ↣ rose(3) ROSE Address manipulation routines.
rose_cmp(3) ↣ rose(3) ROSE Address manipulation routines.
rose_ntoa(3) ↣ rose(3) ROSE Address manipulation routines.
rpc.rstatd(8) Kernel statistics server.
rresvport(3) ↣ rcmd(3) Routines for returning a.
rresvport_af(3) ↣ rcmd(3) Routines for returning a.
rsattach(8) Start a Rose interface.
rsdwnlnk(8) User exit from the ROSE network.
rsparms(8) Configure the Rose interface.
rsports(5) Rose port configuration file.
rsuplnk(8) User entry into the ROSE network.
rt_sigaction(2) ↣ sigaction(2) Examine and change a signal action.
rt_sigpending(2) ↣ sigpending(2) Examine pending signals.
rt_sigprocmask(2) ↣ sigprocmask(2) Examine and change blocked signals.
rt_sigqueueinfo(2) Queue a signal and data.
rt_sigreturn(2) ↣ sigreturn(2) Return from signal handler and cleanup stack frame.
rt_sigsuspend(2) ↣ sigsuspend(2) Wait for a signal.
rt_tgsigqueueinfo(2) ↣ rt_sigqueueinfo(2) Queue a signal and data.
rtc(4) Real-time clock.
rtc(8) Prints the RTC Alarm values using ioctls on /dev/rtc.
rtld-audit(7) Auditing API for the dynamic linker.
rtnetlink(7) Linux IPv4 routing socket.
rtpfeed(1) Feed a DVB-S card with an RTP unicast/multicast/broacast stream.
ruserok(3) ↣ rcmd(3) Routines for returning a.
ruserok_af(3) ↣ rcmd(3) Routines for returning a.
rxecho(8) Route AX.25 packets between ports transparently.
rxecho.conf(5) Control rxecho AX.25 packet routing.
sa1(8) Collect and store binary data in the system activity daily data file.
sa2(8) Create a report from the current standard system activity daily data file.
sadc(8) System activity data collector.
sadf(1) Display data collected by sar in multiple formats.
safe_finger(8) Finger client wrapper that protects against nasty stuff from finger servers.
sap(7) Service Access Point specification.
sar.sysstat(1) Collect, report, or save system activity information.
sbrk(2) ↣ brk(2) Change data segment size.
sched(7) Overview of scheduling APIs.
sched_get_priority_max(2) Get static priority range.
sched_get_priority_min(2) ↣ sched_get_priority_max(2) Get static priority range.
sched_getaffinity(2) ↣ sched_setaffinity(2) Set and get a thread's CPU affinity mask.
sched_getattr(2) ↣ sched_setattr(2) Set and get scheduling policy and attributes.
sched_getcpu(3) Determine CPU on which the calling thread is running.
sched_getparam(2) ↣ sched_setparam(2) Set and get scheduling parameters.
sched_getscheduler(2) ↣ sched_setscheduler(2) Set and get scheduling policy/parameters.
sched_rr_get_interval(2) Get the SCHED_RR interval for the named process.
sched_setaffinity(2) Set and get a thread's CPU affinity mask.
sched_setattr(2) Set and get scheduling policy and attributes.
sched_setparam(2) Set and get scheduling parameters.
sched_setscheduler(2) Set and get scheduling policy/parameters.
sched_yield(2) Yield the processor.
schubmult(1) Expand a product of two Schubert polynomials in the basis of Schubert polynomials.
sd(4) Driver for SCSI disk drives.
seccomp(2) Operate on Secure Computing state of the process.
securetty(5) File which lists terminals from which root can log in.
security(2) ↣ unimplemented(2)
select(2) Synchronous I/O multiplexing.
select_tut(2) Synchronous I/O multiplexing.
sem_close(3) Close a named semaphore.
sem_destroy(3) Destroy an unnamed semaphore.
sem_getvalue(3) Get the value of a semaphore.
sem_init(3) Initialize an unnamed semaphore.
sem_open(3) Initialize and open a named semaphore.
sem_overview(7) Overview of POSIX semaphores.
sem_post(3) Unlock a semaphore.
sem_timedwait(3) ↣ sem_wait(3) Lock a semaphore.
sem_trywait(3) ↣ sem_wait(3) Lock a semaphore.
sem_unlink(3) Remove a named semaphore.
sem_wait(3) Lock a semaphore.
semctl(2) System V semaphore control operations.
semget(2) Get a System V semaphore set identifier.
semop(2) System V semaphore operations.
semtimedop(2) ↣ semop(2) System V semaphore operations.
send(2) Send a message on a socket.
sendfile(2) Transfer data between file descriptors.
sendfile64(2) ↣ sendfile(2) Transfer data between file descriptors.
sendmmsg(2) Send multiple messages on a socket.
sendmsg(2) ↣ send(2) Send a message on a socket.
sendto(2) ↣ send(2) Send a message on a socket.
services(5) Internet network services list.
session-installer(1) Allows applications to easily install and remove software.
session-keyring(7) Session shared process keyring.
set_mempolicy(2) Set default NUMA memory policy for a thread and its children.
set_robust_list(2) ↣ get_robust_list(2) Get/set list of robust futexes.
set_thread_area(2) Set a GDT entry for thread-local storage.
set_tid_address(2) Set pointer to thread ID.
setbuf(3) Stream buffering operations.
setbuffer(3) ↣ setbuf(3) Stream buffering operations.
setcd(1) Set various flags to control the behaviour of your cdrom device.
setcontext(3) ↣ getcontext(3) Get or set the user context.
setdomainname(2) ↣ getdomainname(2) Get/set NIS domain name.
setegid(2) ↣ seteuid(2) Set effective user or group ID.
seteuid(2) Set effective user or group ID.
__setfpucw(3) Set FPU control word on i386 architecture (obsolete).
setfsgid(2) Set group identity used for filesystem checks.
setfsgid32(2) ↣ setfsgid(2) Set group identity used for filesystem checks.
setfsuid(2) Set user identity used for filesystem checks.
setfsuid32(2) ↣ setfsuid(2) Set user identity used for filesystem checks.
setgid(2) Set group identity.
setgid32(2) ↣ setgid(2) Set group identity.
setgroups(2) ↣ getgroups(2) Get/set list of supplementary group IDs.
sethostid(3) ↣ gethostid(3) Get or set the unique identifier of the current host.
sethostname(2) ↣ gethostname(2) Get/set hostname.
setitimer(2) ↣ getitimer(2) Get or set value of an interval timer.
setlinebuf(3) ↣ setbuf(3) Stream buffering operations.
setns(2) Reassociate thread with a namespace.
setpgid(2) Set/get process group.
setpgrp(2) ↣ setpgid(2) Set/get process group.
setpriority(2) ↣ getpriority(2) Get/set program scheduling priority.
setregid(2) ↣ setreuid(2) Set real and/or effective user or group ID.
setresgid(2) ↣ setresuid(2) Set real, effective and saved user or group ID.
setresuid(2) Set real, effective and saved user or group ID.
setresuid32(2) ↣ setresuid(2) Set real, effective and saved user or group ID.
setreuid(2) Set real and/or effective user or group ID.
setreuid32(2) ↣ setreuid(2) Set real and/or effective user or group ID.
setrlimit(2) ↣ getrlimit(2) Get/set resource limits.
setsid(2) Creates a session and sets the process group ID.
setsockopt(2) ↣ getsockopt(2) Get and set options on sockets.
settimeofday(2) ↣ gettimeofday(2) Get / set time.
setuid(2) Set user identity.
setuid32(2) ↣ setuid(2) Set user identity.
setup(2) Setup devices and filesystems, mount root filesystem.
setvbuf(3) ↣ setbuf(3) Stream buffering operations.
sfv-hash(1) ↣ rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
sgetmask(2) Manipulation of signal mask (obsolete).
shm_open(3) Create/open or unlink POSIX shared memory objects.
shm_overview(7) Overview of POSIX shared memory.
shm_unlink(3) ↣ shm_open(3) Create/open or unlink POSIX shared memory objects.
shmat(2) ↣ shmop(2) System V shared memory operations.
shmctl(2) System V shared memory control.
shmdt(2) ↣ shmop(2) System V shared memory operations.
shmget(2) Allocates a System V shared memory segment.
shmop(2) System V shared memory operations.
shutdown(2) Shut down part of a full-duplex connection.
sigaction(2) Examine and change a signal action.
sigaddset(3) ↣ sigsetops(3) POSIX signal set operations.
sigaltstack(2) Set and/or get signal stack context.
sigandset(3) ↣ sigsetops(3) POSIX signal set operations.
sigblock(3) ↣ sigvec(3) BSD signal API.
sigdelset(3) ↣ sigsetops(3) POSIX signal set operations.
sigemptyset(3) ↣ sigsetops(3) POSIX signal set operations.
sigfillset(3) ↣ sigsetops(3) POSIX signal set operations.
siggetmask(3) ↣ sigvec(3) BSD signal API.
sighold(3) ↣ sigset(3) System V signal API.
sigignore(3) ↣ sigset(3) System V signal API.
sigisemptyset(3) ↣ sigsetops(3) POSIX signal set operations.
sigismember(3) ↣ sigsetops(3) POSIX signal set operations.
siglevdetcal(1) The SvxLink signal level detector calibration utility.
sigmask(3) ↣ sigvec(3) BSD signal API.
signal(2) ANSI C signal handling.
signal(7) Overview of signals.
signalfd(2) Create a file descriptor for accepting signals.
signalfd4(2) ↣ signalfd(2) Create a file descriptor for accepting signals.
sigorset(3) ↣ sigsetops(3) POSIX signal set operations.
sigpause(3) Atomically release blocked signals and wait for interrupt.
sigpending(2) Examine pending signals.
sigprocmask(2) Examine and change blocked signals.
sigqueue(3) Queue a signal and data to a process.
sigrelse(3) ↣ sigset(3) System V signal API.
sigreturn(2) Return from signal handler and cleanup stack frame.
sigset(3) System V signal API.
sigsetmask(3) ↣ sigvec(3) BSD signal API.
sigsetops(3) POSIX signal set operations.
sigsuspend(2) Wait for a signal.
sigtimedwait(2) ↣ sigwaitinfo(2) Synchronously wait for queued signals.
sigvec(3) BSD signal API.
sigwait(3) Wait for a signal.
sigwaitinfo(2) Synchronously wait for queued signals.
since(1) Display content of a file since the last time.
sinfo-client(1) A monitoring tool for networked computers (client).
sinfod(8) A monitoring tool for networked computers.
sipsak(1) A utility for various tests on sip servers and user agents.
sispmctl(1) Gembird Silver Shield PM ConTroL program.
sitplus(1) Free software framework for ludic-therapeutic activities.
sk98lin(4) Marvell/SysKonnect Gigabit Ethernet driver v6.21.
sockatmark(3) Determine whether socket is at out-of-band mark.
socket(2) Create an endpoint for communication.
socket(7) Linux socket interface.
socketcall(2) Socket system calls.
socketpair(2) Create a pair of connected sockets.
sopel(1) ↣ willie(1) A highly customizable Internet Relay Chat bot.
spacewalk-channel(8) Subscribe to or unsubscribe system from channel.
spanish(5) A list of spanish words.
splice(2) Splice data to/from a pipe.
sprof(1) Read and display shared object profiling data.
spu_create(2) Create a new spu context.
spu_run(2) Execute an SPU context.
spufs(7) SPU filesystem.
spykeplugin(1) Start a spyke plugin.
spykeviewer(1) Start Spyke Viewer.
ssetmask(2) ↣ sgetmask(2) Manipulation of signal mask (obsolete).
st(4) SCSI tape device.
standards(7) C and UNIX Standards.
start-xpilot-ng-server(8) Start the XPilot NG server.
stat(2) Get file status.
stat64(2) ↣ stat(2) Get file status.
statfs(2) Get filesystem statistics.
statfs64(2) ↣ statfs(2) Get filesystem statistics.
statserial(1) Display serial port modem status lines.
statvfs(3) Get filesystem statistics.
stderr(3) ↣ stdin(3) Standard I/O streams.
stdin(3) Standard I/O streams.
stdout(3) ↣ stdin(3) Standard I/O streams.
stime(2) Set time.
strfmon(3) Convert monetary value to a string.
strfmon_l(3) ↣ strfmon(3) Convert monetary value to a string.
strtod(3) Convert ASCII string to floating-point number.
strtof(3) ↣ strtod(3) Convert ASCII string to floating-point number.
strtold(3) ↣ strtod(3) Convert ASCII string to floating-point number.
stty(2) ↣ unimplemented(2)
subp2pgm(1) Convert VobSub DVD subtitles into pgm files and xml description.
subpage_prot(2) Define a subpage protection for an address range.
subptools(1) Manipulates xml subtitles files.
suffixes(7) List of file suffixes.
svipc(7) System V interprocess communication mechanisms.
svm-checkdata(1) A LIBSVM format checking tool.
svm-easy(1) An automatic script for LIBSVM.
svm-grid(1) A parameter selection tool for LIBSVM.
svm-predict(1) Make predictions based on a trained SVM model file and test data.
svm-scale(1) Scale data to a restricted range as preprocessing for SVM training.
svm-subset(1) A subset selection tool for LIBSVM.
svm-train(1) Train one or more SVM instance(s) on a given data set to produce a model file.
svxlink(1) A general purpose voice services system for ham radio use.
svxlink.conf(5) Configuration file for the SvxLink server.
swapoff(2) ↣ swapon(2) Start/stop swapping to file/device.
swapon(2) Start/stop swapping to file/device.
swift-account-auditor(1) Openstack-swift account auditor.
swift-account-info(1) Openstack-swift account-info tool.
swift-account-reaper(1) Openstack-swift account reaper.
swift-account-replicator(1) Openstack-swift account replicator.
swift-account-server(1) Openstack-swift account server.
swift-container-auditor(1) Openstack-swift container auditor.
swift-container-info(1) Openstack-swift container-info tool.
swift-container-replicator(1) Openstack-swift container replicator.
swift-container-server(1) Openstack-swift container server.
swift-container-sync(1) Openstack-swift container sync.
swift-container-updater(1) Openstack-swift container updater.
swift-dispersion-populate(1) Openstack-swift dispersion populate.
swift-dispersion-report(1) Openstack-swift dispersion report.
swift-get-nodes(1) Openstack-swift get-nodes tool.
swift-init(1) Openstack-swift swift-init tool.
swift-object-auditor(1) Openstack-swift object auditor.
swift-object-expirer(1) Openstack-swift object expirer.
swift-object-info(1) Openstack-swift object-info tool.
swift-object-replicator(1) Openstack-swift object replicator.
swift-object-server(1) Openstack-swift object server.
swift-object-updater(1) Openstack-swift object updater.
swift-orphans(1) Openstack-swift orphans tool.
swift-proxy-server(1) Openstack-swift proxy server.
swift-recon(1) Openstack-swift recon middleware cli tool.
swift-ring-builder(1) Openstack-swift ring builder.
symlink(2) Make a new name for a file.
symlink(7) Symbolic link handling.
symlinkat(2) ↣ symlink(2) Make a new name for a file.
sync(2) Commit buffer cache to disk.
sync_file_range(2) Sync a file segment with disk.
sync_file_range2(2) ↣ sync_file_range(2) Sync a file segment with disk.
syncfs(2) ↣ sync(2) Commit buffer cache to disk.
syscall(2) Indirect system call.
_syscall(2) Invoking a system call without library support (OBSOLETE).
syscalls(2) Linux system calls.
_sysctl(2) ↣ sysctl(2) Read/write system parameters.
sysctl(2) Read/write system parameters.
sysfs(2) Get filesystem type information.
sysinfo(2) Returns information on overall system statistics.
syslog(2) Read and/or clear kernel message ring buffer; set console_loglevel.
syslog(3) Send messages to the system logger.
sysstat(5) Sysstat configuration file.
system-config-kickstart(8) Graphical interface for creating kickstart files.
tagmp3(1) Manipulate ID3v1 tags.
tapestat(1) Report tape statistics.
tcdrain(3) ↣ termios(3)
tcflow(3) ↣ termios(3)
tcflush(3) ↣ termios(3)
tcgetattr(3) ↣ termios(3)
tcl2c++(1) Converts tcl scripts into a C++ static character array.
tcp(7) TCP protocol.
tcsendbreak(3) ↣ termios(3)
tcsetattr(3) ↣ termios(3)
tee(2) Duplicating pipe content.
termcap(5) Terminal capability database.
termio(7) System V terminal driver interface.
termios(3)
termit(1)
tgkill(2) ↣ tkill(2) Send a signal to a thread.
thread-keyring(7) Per-thread keyring.
tictactoe-ng(1) Fun, Simple, Tic Tac Toe game for GNOME.
tiger-hash(1) ↣ rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
time(2) Get time in seconds.
time(7) Overview of time and timers.
timer_create(2) Create a POSIX per-process timer.
timer_delete(2) Delete a POSIX per-process timer.
timer_getoverrun(2) Get overrun count for a POSIX per-process timer.
timer_gettime(2) ↣ timer_settime(2) Arm/disarm and fetch state of POSIX per-process timer.
timer_settime(2) Arm/disarm and fetch state of POSIX per-process timer.
timeradd(3) Timeval operations.
timerclear(3) ↣ timeradd(3) Timeval operations.
timercmp(3) ↣ timeradd(3) Timeval operations.
timerfd_create(2) Timers that notify via file descriptors.
timerfd_gettime(2) ↣ timerfd_create(2) Timers that notify via file descriptors.
timerfd_settime(2) ↣ timerfd_create(2) Timers that notify via file descriptors.
timerisset(3) ↣ timeradd(3) Timeval operations.
timersub(3) ↣ timeradd(3) Timeval operations.
times(2) Get process times.
tiptop(1) Display hardware performance counters for Linux tasks.
tis-620(7) ↣ iso_8859-11(7) ISO 8859-11 character set encoded in octal, decimal, and hexadecimal.
tkill(2) Send a signal to a thread.
tlsdate(1) Secure parasitic rdate replacement.
tlsdate-dbus-announce(1) Secure parasitic rdate replacement dbus announcer.
tlsdate-helper(1) Secure parasitic rdate replacement.
tlsdate-routeup(1) Secure parasitic rdate replacement route change utility.
tlsdated(8) Secure parasitic rdate replacement daemon.
torbrowser-launcher(1) Tor Browser Bundle helper.
trafgen(8) A fast, multithreaded network packet generator.
trcs(1) Convert text files from one codeset to other.
truncate(2) Truncate a file to a specified length.
truncate64(2) ↣ truncate(2) Truncate a file to a specified length.
try-from(8) Test program for the tcp_wrapper.
ts_filter(1) Extract a single stream from a multiplexed TS.
tth-hash(1) ↣ rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
tty(4) Controlling terminal.
tty_ioctl(4) Ioctls for terminals and serial lines.
ttylinkd(8) TTYlink daemon for AX.25, NET/ROM, ROSE and IP.
ttylinkd.conf(5) Ttylinkd configuration file.
ttyname(3) Return name of a terminal.
ttyname_r(3) ↣ ttyname(3) Return name of a terminal.
ttyS(4) Serial terminal lines.
ttytype(5) Terminal device to default terminal type mapping.
tuxcall(2) ↣ unimplemented(2)
udp(7) User Datagram Protocol for IPv4.
udplite(7) Lightweight User Datagram Protocol.
ugetrlimit(2) ↣ getrlimit(2) Get/set resource limits.
ukopp(1) Copy files to USB stick or other disk or disk-like device.
ulimit(3) Get and set user limits.
ulistd(8) Collect FBB BBS messages list sent via unproto frames.
umask(2) Set file mode creation mask.
umount(2) Unmount filesystem.
umount2(2) ↣ umount(2) Unmount filesystem.
uname(2) Get name and information about current kernel.
undocumented(3) Undocumented library functions.
unimplemented(2)
units(7) Decimal and binary prefixes.
unix(7) Sockets for local interprocess communication.
unlink(2) Delete a name and possibly the file it refers to.
unlinkat(2) ↣ unlink(2) Delete a name and possibly the file it refers to.
unshare(2) Disassociate parts of the process execution context.
up2date(5) Configuration file for Red Hat Network client programs.
update-inetd(8) Create, remove, enable or disable entry in /etc/inetd.conf.
update-initramfs(8) Generate an initramfs image.
update-initramfs.conf(5) Configuration file for update-initramfs.
update_firmware(8) Writes firmware into the flash memory of system devices.
update_routes(1) Update the database of BBS and callsigns.
urandom(4) ↣ random(4) Kernel random number source devices.
uri(7) Uniform resource identifier (URI), including a URL or URN.
url(7) ↣ uri(7) Uniform resource identifier (URI), including a URL or URN.
urlcoding(3) A Libbash library for encoding and decoding URL's.
urn(7) ↣ uri(7) Uniform resource identifier (URI), including a URL or URN.
uronode(8) Node front end for AX.25, NET/ROM, Rose and TCP.
uronode.conf(5) URONode configuration file.
uronode.perms(5) URONode permissions file.
uselib(2) Load shared library.
uselocale(3) Set/get the locale for the calling thread.
user-keyring(7) Per-user keyring.
user-session-keyring(7) Per-user default session keyring.
user_namespaces(7) Overview of Linux user namespaces.
ustat(2) Get filesystem statistics.
utime(2) Change file last access and modification times.
utimensat(2) Change file timestamps with nanosecond precision.
utimes(2) ↣ utime(2) Change file last access and modification times.
utmp(5) Login records.
utmpx(5) ↣ utmp(5) Login records.
vacation(1) Return “I am not here” indication.
vcs(4) Virtual console memory.
vcsa(4) ↣ vcs(4) Virtual console memory.
vdso(7) Overview of the virtual ELF dynamic shared object.
verr(3) ↣ err(3) Formatted error messages.
verrx(3) ↣ err(3) Formatted error messages.
vfork(2) Create a child process and block parent.
vhangup(2) Virtually hangup the current terminal.
vlock(1) Virtual Console lock program.
vlock-main(8) Lock current virtual console.
vlock-plugins(5) Plugin support for vlock.
vm86(2) Enter virtual 8086 mode.
vm86old(2) ↣ vm86(2) Enter virtual 8086 mode.
vmsplice(2) Splice user pages into a pipe.
vobcopy(1) Copy (rip) files from a dvd to the harddisk.
volname(1) Return volume name.
vserver(2) ↣ unimplemented(2)
vsyslog(3) ↣ syslog(3) Send messages to the system logger.
vwarn(3) ↣ err(3) Formatted error messages.
vwarnx(3) ↣ err(3) Formatted error messages.
wait(2) Wait for process to change state.
wait3(2) ↣ wait4(2) Wait for process to change state, BSD style.
wait4(2) Wait for process to change state, BSD style.
waitid(2) ↣ wait(2) Wait for process to change state.
waitpid(2) ↣ wait(2) Wait for process to change state.
warn(3) ↣ err(3) Formatted error messages.
warnx(3) ↣ err(3) Formatted error messages.
wavelan(4) AT&T GIS WaveLAN ISA device driver.
wavemon(1) A wireless network monitor.
wavemonrc(5) Wavemon configuration file.
wcw(1) Window Switch Command Wrapper.
whirlpool-hash(1) ↣ rhash(1) Calculate/check CRC32, MD5, SHA1, GOST, TTH, BTIH or other hash sums.
widemargin(1) Quick and easy bible study application.
wiipdf(1) Present using xpdf and your wiimote.
willie(1) A highly customizable Internet Relay Chat bot.
winswitch_applet(1) Window Switch applet.
winswitch_away(1) Window Switch user-is-away message.
winswitch_back(1) Window Switch user-is-back message.
winswitch_client(1) Window Switch applet.
winswitch_command_wrapper(1) Window Switch Command Wrapper.
winswitch_launcher(1) Window Switch session launcher.
winswitch_open_remotely(1) Window Switch helper to open files on a remote server.
winswitch_server(1) Window Switch server.
winswitch_ssh_session(1) Window Switch SSH Session Helper.
winswitch_ssh_Xnest(1) Window Switch SSH Xnest Session Helper.
winswitch_stdio_socket(1) Window Switch Unix Domain Socket Helper.
winswitch_stdio_tcp(1) Window Switch TCP Socket Helper.
wipe(1) Securely erase files from magnetic media.
wipe.tr-asc(1)
wmtop(1) WindowMaker dockapp.
wmwave(1)
write(2) Write to a file descriptor.
writev(2) ↣ readv(2) Read or write data into multiple buffers.
wtmp(5) ↣ utmp(5) Login records.
x25(7) ITU-T X.25 / ISO-8208 protocol interface.
xattr(7) Extended attributes.
xkoules(6) Action game for X11.
xmlif(1) Conditional processing instructions for XML.
xoscope(1) Digital Oscilloscope.
zeppelin(8) ATM LAN Emulation client demon (LED) Zeppelin.
zero(4) ↣ null(4) Data sink.
zimpl(1) Zuse Institute Mathematical Programming Language.
zone.conf(5) Fiaif zone configuration files.