Manual pages
Origin: PROCEDURAL GENERATION LANGUAGE.
| [ Alias ↣ ] Name (section) | Brief |
|---|---|
| GENLIB_BUS(3) | Creates a bus name for netlist. |
| GENLIB_COPY_UP_ALL_CON(3) | Copy all physical connectors of an instance face in the current figure. |
| GENLIB_COPY_UP_ALL_REF(3) | Copy a several physical reference from an instance in the current figure. |
| GENLIB_COPY_UP_CON(3) | Copy a physical connector from an instance in the current figure. |
| GENLIB_COPY_UP_CON_FACE(3) | Copy a physical connector from an instance in the current figure. |
| GENLIB_COPY_UP_REF(3) | Copy a physical reference from an instance in the current figure. |
| GENLIB_COPY_UP_SEG(3) | Copy a physical segment from an instance in the current figure. |
| GENLIB_DEF_AB(3) | Define a new abutment box to the current layout cell. |
| GENLIB_DEF_LOFIG(3) | Open a netlist model as current figure. |
| GENLIB_DEF_PHFIG(3) | Open a layout model as current figure. |
| GENLIB_DEF_PHINS(3) | Define a new reference instance. |
| GENLIB_DEF_PHSC(3) | Load a netlist and open a layout model as current figure. |
| GENLIB_ELM(3) | Creates a single element bus name for netlist. |
| GENLIB_FLATTEN_ALL_LOINS(3) | Flatten all instances in the current netlist figure. |
| GENLIB_FLATTEN_ALL_PHINS(3) | Flatten all instances in the current layout figure. |
| GENLIB_FLATTEN_LOFIG(3) | Flatten an instance in the current netlist figure. |
| GENLIB_FLATTEN_PHFIG(3) | Flatten an instance in the current layout figure. |
| GENLIB_GET_CON_X(3) | Retrieve the x coordinate of an instance connector. |
| GENLIB_GET_CON_Y(3) | Retrieve the x coordinate of an instance connector. |
| GENLIB_GET_INS_X(3) | Retrieve the x coordinate of an instance. |
| GENLIB_GET_INS_Y(3) | Retrieve the y coordinate of an instance. |
| GENLIB_GET_REF_X(3) | Retrieve the x coordinate of an instance reference. |
| GENLIB_GET_REF_Y(3) | Retrieve the y coordinate of an instance reference. |
| GENLIB_HEIGHT(3) | Compute the height of a model. |
| GENLIB_LOAD_LOFIG(3) | Loads a netlist form disk and opens it as current figure. |
| GENLIB_LOAD_PHFIG(3) | Loads a layout form disk and opens it as current figure. |
| GENLIB_LOCAP(3) | Add a logical capacitor to the current netlist figure. |
| GENLIB_LOCON(3) | Adds a logical connector to the current netlist figure. |
| GENLIB_LOINS(3) | Add a logical instance to the current figure. |
| GENLIB_LOINSE(3) | Add a logical instance to the current figure, with explicit connections. |
| GENLIB_LORES(3) | Add a logical resistor to the current netlist figure. |
| GENLIB_LOSELF(3) | Add a logical inductor to the current netlist figure. |
| GENLIB_LOSIG(3) | Declare an internal logical signal, or a vector of internal logical signals. |
| GENLIB_LOSIGMERGE(3) | Merge two logical signals. |
| GENLIB_LOTRS(3) | Adds a logical transistor to the current netlist figure. |
| GENLIB_OUTLINE(3) | Build an outline from the current layout cell. |
| GENLIB_PHCON(3) | Place a physical connector in the current figure at absolute coordinates. |
| GENLIB_PHREF(3) | Place a physical reference in the current figure at absolute coordinates. |
| GENLIB_PHSEG(3) | Place a physical segment in the current figure at absolute coordinates. |
| GENLIB_PHVIA(3) | Place a physical via in the current figure at absolute coordinates. |
| GENLIB_PLACE(3) | Place a physical instance in the current figure at absolute coordinates. |
| GENLIB_PLACE_BOTTOM(3) | Place a physical instance in the current figure under the "reference instance". |
| GENLIB_PLACE_CON_REF(3) | Put a connector on top of a reference belonging an instance in the current figure. |
| GENLIB_PLACE_LEFT(3) | Place a physical instance in the current figure at the left of the "reference instance". |
| GENLIB_PLACE_ON(3) | Place a physical instance in the current figure matching connectors. |
| GENLIB_PLACE_RIGHT(3) | Place a physical instance in the current figure at the right of the "reference instance". |
| GENLIB_PLACE_SEG_REF(3) | Put a segment on a reference belonging an instance in the current figure. |
| GENLIB_PLACE_TOP(3) | Place a physical instance in the current figure on the top of the "reference instance". |
| GENLIB_PLACE_VIA_REF(3) | Put a via on top of a reference belonging to an instance in the current figure. |
| GENLIB_REVERSE_PHCON(3) | Reverse the order of physical connectors on a bus. |
| GENLIB_SAVE_LOFIG(3) | Save a netlist on disk. |
| GENLIB_SAVE_PHFIG(3) | Save a layout on disk. |
| GENLIB_SAVE_PHSC(3) | Save a layout on disk. |
| GENLIB_SC_BOTTOM(3) | Place an instance in the current figure at the right of the "reference instance". |
| GENLIB_SC_LEFT(3) | Place an instance in the current figure at the right of the "reference instance". |
| GENLIB_SC_PLACE(3) | Place an instance in the current figure at absolute coordinates. |
| GENLIB_SC_RIGHT(3) | Place an instance in the current figure at the right of the "reference instance". |
| GENLIB_SC_TOP(3) | Place an instance in the current figure at the right of the "reference instance". |
| GENLIB_UNFLATTEN_LOFIG(3) | Creates a hierarchy level from instances in the current logical figure. |
| GENLIB_WIRE1(3) | Place a physical segment in the current figure. |
| GENLIB_WIRE2(3) | Place two physical segments in the current figure. |
| GENLIB_WIRE3(3) | Place three physical segments in the current figure. |