SIMPLE SOLUTIONS

Manual pages

Origin: sg3_utils-1.35.

[ Alias ↣ ] Name (section) Brief
sg_emc_trespass(8) Change ownership of SCSI LUN from another Service-Processor to this one.
sg_get_config(8) Send SCSI GET CONFIGURATION command (MMC-4 +).
sg_ident(8) Send SCSI REPORT/SET IDENTIFYING INFORMATION command.
sg_map26(8) Map SCSI generic (sg) device to corresponding device names.
sg_opcodes(8) Report supported SCSI commands or task management functions.
sg_prevent(8) Send SCSI PREVENT ALLOW MEDIUM REMOVAL command.
sg_rdac(8) Display or modify SCSI RDAC Redundant Controller mode page.
sg_read(8) Read multiple blocks of data, optionally with SCSI READ commands.
sg_read_block_limits(8) Send SCSI READ BLOCK LIMITS command.
sg_safte(8) Access SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) device.
sg_start(8) Send SCSI START STOP UNIT command: start, stop, load or eject medium.
sg_test_rwbuf(8) Test a SCSI host adapter by issuing dummy writes and reads.
sg_wr_mode(8) Write (modify) SCSI mode page.
sgm_dd(8) Copy data to and from files and devices, especially SCSI devices.
sgp_dd(8) Copy data to and from files and devices, especially SCSI devices.