Manual pages
Scope: AFS Command Reference.
[ Alias ↣ ] Name (section) | Brief |
---|---|
afs(1) | Introduction to AFS commands. |
afs-up(1) | Recursively copy directories, preserving AFS metadata. |
afs_compile_et(1) | Produce error text tables for compilation. |
afsd(8) | Initializes the Cache Manager and starts related daemons. |
afsd.fuse(8) ↣ afsd(8) | Initializes the Cache Manager and starts related daemons. |
afsmonitor(1) | Monitors File Servers and Cache Managers. |
akeyconvert(8) | Import keys from rxkad.keytab to an AFS KeyFileExt. |
aklog(1) | Obtain tokens for authentication to AFS. |
asetkey(8) | Add a key from a keytab to an AFS KeyFile or KeyFileExt. |
backup(8) | Introduction to the backup command suite. |
backup_adddump(8) | Defines a dump level in the dump hierarchy. |
backup_addhost(8) | Adds a Tape Coordinator entry to the Backup Database. |
backup_addvolentry(8) | Defines a volume entry in a volume set. |
backup_addvolset(8) | Creates a new (empty) volume set. |
backup_apropos(8) | Displays each help entry containing a keyword string. |
backup_dbverify(8) | Checks the integrity of the Backup Database. |
backup_deldump(8) | Deletes a dump level from the Backup Database. |
backup_deletedump(8) | Deletes one or more dump records from the Backup Database. |
backup_delhost(8) | Deletes a Tape Coordinator entry from the Backup Database. |
backup_delvolentry(8) | Deletes a volume entry from a volume set. |
backup_delvolset(8) | Deletes one or more volume sets from the Backup Database. |
backup_diskrestore(8) | Restores the entire contents of a partition. |
backup_dump(8) | Creates a dump (dumps a volume set at a particular dump level). |
backup_dumpinfo(8) | Displays a dump record from the Backup Database. |
backup_help(8) | Displays help for backup commands. |
backup_interactive(8) | Enters interactive mode. |
backup_jobs(8) | Lists pending and running operations in interactive mode. |
backup_kill(8) | Terminates a pending or running operation. |
backup_labeltape(8) | Creates the magnetic label on a tape. |
backup_listdumps(8) | Displays the dump hierarchy from the Backup Database. |
backup_listhosts(8) | Lists Tape Coordinators registered in the Backup Database. |
backup_listvolsets(8) | Lists volume set entries from the Backup Database. |
backup_quit(8) | Leaves interactive mode. |
backup_readlabel(8) | Reads and displays a tape's label. |
backup_restoredb(8) | Restores a saved copy of the Backup Database. |
backup_savedb(8) | Creates a saved copy of the Backup Database. |
backup_scantape(8) | Extracts dump information from a tape. |
backup_setexp(8) | Sets the expiration date for existing dump levels. |
backup_status(8) | Reports a Tape Coordinator's status. |
backup_volinfo(8) | Displays a volume's dump history from the Backup Database. |
backup_volrestore(8) | Restores one or more volumes. |
backup_volsetrestore(8) | Restores all volumes in a volume set. |
bos(8) | Introduction to the bos command suite. |
bos_addhost(8) | Adds a database server machine to the CellServDB file. |
bos_addkey(8) | Adds a new server encryption key to the KeyFile file. |
bos_adduser(8) | Adds a privileged user to the UserList file. |
bos_apropos(8) | Displays each help entry containing a keyword string. |
bos_create(8) | Defines a new process in the BosConfig file and starts it. |
bos_delete(8) | Deletes a server process from the BosConfig file. |
bos_exec(8) | Executes a command on a remote server machine. |
bos_getdate(8) | Displays the time stamps on an AFS binary file. |
bos_getlog(8) | Prints a server process's log file. |
bos_getrestart(8) | Displays the automatic restart times for server processes. |
bos_getrestricted(8) | Displays whether a bos server is restricted or not. |
bos_help(8) | Displays help for bos commands. |
bos_install(8) | Installs a new version of a binary file. |
bos_listhosts(8) | Displays the contents of the CellServDB file. |
bos_listkeys(8) | Displays the server encryption keys from the KeyFile file. |
bos_listusers(8) | Lists the privileged users from the UserList file. |
bos_prune(8) | Removes obsolete files from /usr/lib/openafs and /var/log/openafs. |
bos_removehost(8) | Removes a database server machine from the CellServDB file. |
bos_removekey(8) | Removes a server encryption key from the KeyFile file. |
bos_removeuser(8) | Removes a privileged user from the UserList file. |
bos_restart(8) | Restarts a server process. |
bos_salvage(8) | Restores internal consistency to a file system or volume. |
bos_setauth(8) | Sets authorization checking requirements for all server processes. |
bos_setcellname(8) | Sets the cell's name in ThisCell and CellServDB. |
bos_setrestart(8) | Sets when the BOS Server restarts processes. |
bos_setrestricted(8) | Place a server in restricted mode. |
bos_shutdown(8) | Stops a process without changing its status flag. |
bos_start(8) | Starts a process after setting its status flag. |
bos_startup(8) | Starts a process without changing its status flag. |
bos_status(8) | Displays the status of server processes. |
bos_stop(8) | Stops a process after changing its status flag. |
bos_uninstall(8) | Reverts to the former version of a process's binary file. |
bos_util(8) | Manipulate the AFS server Keyfile. |
bosserver(8) | Initializes the BOS Server. |
buserver(8) | Initializes the Backup Server. |
butc(8) | Initializes the Tape Coordinator process. |
cmdebug(1) | Reports the status of a host Cache Manager. |
dafileserver(8) | Initializes the File Server component of the dafs process. |
dafssync-debug(8) ↣ fssync-debug(8) | Introduction to the fssync-debug command suite. |
dafssync-debug_attach(8) ↣ fssync-debug_attach(8) | Forces full volume attachment (FSYNC_VOL_ATTACH opcode). |
dafssync-debug_callback(8) ↣ fssync-debug_callback(8) | Breaks callbacks for a volume (FSYNC_VOL_BREAKCBKS opcode). |
dafssync-debug_detach(8) ↣ fssync-debug_detach(8) | Detaches a volume (FSYNC_VOL_DONE opcode). |
dafssync-debug_error(8) ↣ fssync-debug_error(8) | Forces volume into hard error state (FSYNC_VOL_FORCE_ERROR opcode). |
dafssync-debug_header(8) ↣ fssync-debug_header(8) | Retrieves volume disk data structure (FSYNC_VOL_QUERY_HDR opcode). |
dafssync-debug_leaveoff(8) ↣ fssync-debug_leaveoff(8) | Leaves a volume offline (FSYNC_VOL_LEAVE_OFF opcode). |
dafssync-debug_list(8) ↣ fssync-debug_list(8) | Historical sync command (FSYNC_VOL_LISTVOLUMES opcode). |
dafssync-debug_mode(8) ↣ fssync-debug_mode(8) | Changes volume attach mode (FSYNC_VOL_NEEDVOLUME opcode). |
dafssync-debug_move(8) ↣ fssync-debug_move(8) | Sets volume moved flag (FSYNC_VOL_MOVE opcode). |
dafssync-debug_offline(8) ↣ fssync-debug_offline(8) | Brings a volume offline (FSYNC_VOL_OFF opcode). |
dafssync-debug_online(8) ↣ fssync-debug_online(8) | Brings a volume online (FSYNC_VOL_ON opcode). |
dafssync-debug_query(8) ↣ fssync-debug_query(8) | Displays volume structure (FSYNC_VOL_QUERY opcode). |
dafssync-debug_stats(8) ↣ fssync-debug_stats(8) | Displays various statistics. |
dafssync-debug_vgcadd(8) ↣ fssync-debug_vgcadd(8) | Add an entry to the VG cache (FSYNC_VG_UPDATE opcode). |
dafssync-debug_vgcdel(8) ↣ fssync-debug_vgcdel(8) | Delete an entry from the VG cache (FSYNC_VG_UPDATE opcode). |
dafssync-debug_vgcquery(8) ↣ fssync-debug_vgcquery(8) | Displays VG cache contents (FSYNC_VG_QUERY opcode). |
dafssync-debug_vgcscan(8) ↣ fssync-debug_vgcscan(8) | Force a VG cache rescan (FSYNC_VG_SCAN opcode). |
dafssync-debug_vgcscanall(8) ↣ fssync-debug_vgcscanall(8) | Force a VG cache rescan on all partitions (FSYNC_VG_SCAN_ALL opcode). |
dafssync-debug_vnode(8) ↣ fssync-debug_vnode(8) | Display vnode info (FSYNC_VOL_QUERY_VNODE opcode). |
dafssync-debug_volop(8) ↣ fssync-debug_volop(8) | Display pending volume operation info (FSYNC_VOL_QUERY_VOP opcode). |
dasalvager(8) | Initializes the Salvager component of the dafs process. |
davolserver(8) | Initializes the Volume Server component of the dafs process. |
fileserver(8) | Initializes the File Server component of the fs process. |
fms(8) | Determine a tape's capacity and a tape device's filemark size. |
fs(1) | Introduction to the fs command suite. |
fs_apropos(1) | Displays each help entry containing a keyword string. |
fs_bypassthreshold(1) | Get/set Cache Bypass file size threshold. |
fs_checkservers(1) | Displays the status of server machines. |
fs_checkvolumes(1) | Forces the Cache Manager to update volume information. |
fs_cleanacl(1) | Remove obsolete entries from an ACL. |
fs_copyacl(1) | Copies an ACL from a directory to one or more other directories. |
fs_discon(1) | Manage client "disconnected mode". |
fs_diskfree(1) | Shows data about the partition housing a directory or file. |
fs_examine(1) | Shows data about the volume containing a directory or file. |
fs_exportafs(1) | Configures export of AFS to clients of other file systems. |
fs_flush(1) | Forces the Cache Manager to discard a cached file or directory. |
fs_flushmount(1) | Forces the Cache Manager to discard a mount point. |
fs_flushvolume(1) | Forces the Cache Manager to discard cached data from a volume. |
fs_getcacheparms(1) | Displays the current size and usage of the cache. |
fs_getcalleraccess(1) | Show the current user's access to a file or directory. |
fs_getcellstatus(1) | Reports whether setuid programs are honored in a cell. |
fs_getclientaddrs(1) | Displays the client interfaces to register. |
fs_getcrypt(1) | Displays the state of encryption for AFS file transfers. |
fs_getfid(1) | Display the fid for a given path in AFS. |
fs_getserverprefs(1) | Displays preference ranks for file servers or VL servers. |
fs_getverify(1) | Displays the state of data verification for AFS store operations [Windows only]. |
fs_help(1) | Displays help for fs commands. |
fs_listacl(1) | Displays ACLs. |
fs_listaliases(1) | Displays the current list of aliases for AFS cells. |
fs_listcells(1) | Displays the database server machines known to the Cache Manager. |
fs_listquota(1) | Displays quota information for a volume. |
fs_lsmount(1) | Reports the volume for which a directory is the mount point. |
fs_messages(1) | Sets whether the Cache Manager writes log messages. |
fs_mkmount(1) | Creates a mount point for a volume. |
fs_monitor(1) | Enable client logging to a remote monitoring station. |
fs_newalias(1) | Creates a new alias for a cell. |
fs_newcell(1) | Changes the kernel-resident list of a cell's database servers. |
fs_nukenfscreds(1) | Discard NFS translator tokens. |
fs_precache(1) | Set precache size. |
fs_quota(1) | Displays the quota used in the volume containing a directory or file. |
fs_rmmount(1) | Removes a mount point. |
fs_rxstatpeer(1) | Manage per-peer Rx statistics collection. |
fs_rxstatproc(1) | Manage per-process Rx statistics collection. |
fs_setacl(1) | Sets the ACL for a directory. |
fs_setcachesize(1) | Sets the size of the disk cache. |
fs_setcbaddr(1) | Configure IP address used for AFS callbacks. |
fs_setcell(1) | Configures permissions for setuid programs from specified cells. |
fs_setclientaddrs(1) | Sets the client interfaces to register with the File Server. |
fs_setcrypt(1) | Enables of disables the encryption of AFS file transfers. |
fs_setquota(1) | Sets the quota for the volume containing a file or directory. |
fs_setserverprefs(1) | Sets the preference ranks for file servers or VL servers. |
fs_setverify(1) | Enables or disables data verification for AFS store data operations [Windows only]. |
fs_setvol(1) | Set quota and messages for a volume containing a file or directory. |
fs_storebehind(1) | Enables asynchronous writes to the file server. |
fs_sysname(1) | Reports or sets the CPU/operating system type. |
fs_uuid(1) | Prints the uuid of the client or generates a new one. |
fs_whereis(1) | Reports each file server housing a file or directory. |
fs_whichcell(1) | Returns the cell to which a file or directory belongs. |
fs_wscell(1) | Returns the name of the cell to which a machine belongs. |
fssync-debug(8) | Introduction to the fssync-debug command suite. |
fssync-debug_attach(8) | Forces full volume attachment (FSYNC_VOL_ATTACH opcode). |
fssync-debug_callback(8) | Breaks callbacks for a volume (FSYNC_VOL_BREAKCBKS opcode). |
fssync-debug_detach(8) | Detaches a volume (FSYNC_VOL_DONE opcode). |
fssync-debug_error(8) | Forces volume into hard error state (FSYNC_VOL_FORCE_ERROR opcode). |
fssync-debug_header(8) | Retrieves volume disk data structure (FSYNC_VOL_QUERY_HDR opcode). |
fssync-debug_leaveoff(8) | Leaves a volume offline (FSYNC_VOL_LEAVE_OFF opcode). |
fssync-debug_list(8) | Historical sync command (FSYNC_VOL_LISTVOLUMES opcode). |
fssync-debug_mode(8) | Changes volume attach mode (FSYNC_VOL_NEEDVOLUME opcode). |
fssync-debug_move(8) | Sets volume moved flag (FSYNC_VOL_MOVE opcode). |
fssync-debug_offline(8) | Brings a volume offline (FSYNC_VOL_OFF opcode). |
fssync-debug_online(8) | Brings a volume online (FSYNC_VOL_ON opcode). |
fssync-debug_query(8) | Displays volume structure (FSYNC_VOL_QUERY opcode). |
fssync-debug_stats(8) | Displays various statistics. |
fssync-debug_vgcadd(8) | Add an entry to the VG cache (FSYNC_VG_UPDATE opcode). |
fssync-debug_vgcdel(8) | Delete an entry from the VG cache (FSYNC_VG_UPDATE opcode). |
fssync-debug_vgcquery(8) | Displays VG cache contents (FSYNC_VG_QUERY opcode). |
fssync-debug_vgcscan(8) | Force a VG cache rescan (FSYNC_VG_SCAN opcode). |
fssync-debug_vgcscanall(8) | Force a VG cache rescan on all partitions (FSYNC_VG_SCAN_ALL opcode). |
fssync-debug_vnode(8) | Display vnode info (FSYNC_VOL_QUERY_VNODE opcode). |
fssync-debug_volop(8) | Display pending volume operation info (FSYNC_VOL_QUERY_VOP opcode). |
fstrace(8) | Introduction to the fstrace command suite. |
fstrace_apropos(8) | Displays each help entry containing a keyword string. |
fstrace_clear(8) | Clears the trace log. |
fstrace_dump(8) | Dumps a trace log. |
fstrace_help(8) | Displays help for fstrace commands. |
fstrace_lslog(8) | Displays information about a log. |
fstrace_lsset(8) | Reports the status of an event set. |
fstrace_setlog(8) | Sets the size of a trace log. |
fstrace_setset(8) | Sets the status of an event set. |
klog.krb5(1) | Authenticates to Kerberos and obtains a token. |
livesys(1) | Reports the configured CPU/operating system type. |
pagsh.openafs(1) | Creates a new PAG. |
prdb_check(8) | Checks the integrity of the Protection Database. |
pt_util(8) | Load or dump a Protection Server database. |
pts(1) | Introduction to the pts command suite. |
pts_adduser(1) | Adds a user or machine to a Protection Database group. |
pts_apropos(1) | Displays each help entry containing a keyword string. |
pts_chown(1) | Changes the owner of a Protection Database entry. |
pts_creategroup(1) | Creates an (empty) Protection Database group entry. |
pts_createuser(1) | Creates a user or machine entry in the Protection Database. |
pts_delete(1) | Deletes a Protection Database entry. |
pts_examine(1) | Displays a Protection Database entry. |
pts_help(1) | Displays help for pts commands. |
pts_interactive(1) | Enters interactive mode. |
pts_listentries(1) | Displays all users or groups in the Protection Database. |
pts_listmax(1) | Displays the max user id and max group id counters. |
pts_listowned(1) | Show the Protection Database groups owned by a user or group. |
pts_membership(1) | Displays the membership list for a user or group. |
pts_quit(1) | Exit from pts interactive mode. |
pts_removeuser(1) | Removes a user from a Protection Database group. |
pts_rename(1) | Changes the name of a Protection Database entry. |
pts_setfields(1) | Sets privacy flags or quota for a Protection Database entry. |
pts_setmax(1) | Sets the value of the max group id or max user id counter. |
pts_sleep(1) | Pauses for a few seconds. |
pts_source(1) | Read pts commands from a file. |
ptserver(8) | Initializes the Protection Server. |
read_tape(8) | Reads volume dumps from a backup tape to a file. |
restorevol(1) | Restore a volume from vos dump to the local file system. |
rmtsysd(8) | Daemon to execute AFS-specific system calls for remote hosts. |
rxdebug(1) | Provides debugging trace of Rx activity. |
rxgen(1) | Stub generator for the Rx remote procedure call package. |
salvager(8) | Initializes the Salvager component of the fs process. |
salvageserver(8) | Initializes the Salvageserver component of the dafs process. |
scout(1) | Monitors the File Server process. |
state_analyzer(8) | Explores and queries the fileserver state database interactively. |
sys(1) | Reports the compile-time CPU/operating system type. |
tokens(1) | Displays the issuer's tokens. |
translate_et(1) | Translates numbered error codes into text messages. |
udebug(1) | Reports Ubik process status for a database server process. |
unlog(1) | Discards all of the issuer's tokens. |
upclient(8) | Initializes the client portion of the Update Server. |
upserver(8) | Initializes the server portion of the Update Server. |
vldb_check(8) | Checks the integrity of the VLDB. |
vlserver(8) | Initializes the Volume Location Server. |
voldump(8) | Dump an AFS volume without using the Volume Server. |
volinfo(8) | Produces detailed statistics about AFS volume headers. |
volscan(8) | Produces detailed information about AFS volumes. |
volserver(8) | Initializes the Volume Server component of the fs process. |
vos(1) | Introduction to the vos command suite. |
vos_addsite(1) | Adds a read-only site definition to a volume's VLDB entry. |
vos_apropos(1) | Displays each help entry containing a keyword string. |
vos_backup(1) | Creates a backup volume for a single read/write volume. |
vos_backupsys(1) | Creates a backup volume for several read/write volumes. |
vos_changeaddr(1) | Changes or removes a file server machine's entry in the VLDB. |
vos_changeloc(1) | Change a volume's entry in the VLDB. |
vos_clone(1) | Creates a shared-space copy of a volume on a partition. |
vos_convertROtoRW(1) | Converts a Read-Only volume into a Read/Write volume. |
vos_copy(1) | Make a copy of a volume. |
vos_create(1) | Creates a read/write volume and associated VLDB entry. |
vos_delentry(1) | Removes a volume entry from the VLDB. |
vos_dump(1) | Converts a volume into ASCII format and writes it to a file. |
vos_endtrans(1) | Ends a volserver transaction. |
vos_examine(1) | Shows volume header and VLDB entry information for a volume. |
vos_help(1) | Displays help for vos commands. |
vos_listaddrs(1) | Displays all VLDB server entries. |
vos_listpart(1) | Displays all AFS partitions on a file server machine. |
vos_listvldb(1) | Displays a volume's VLDB entry. |
vos_listvol(1) | Displays information from a volume header. |
vos_lock(1) | Locks a VLDB volume entry. |
vos_move(1) | Moves a read/write volume to another site. |
vos_offline(1) | Takes a volume offline. |
vos_online(1) | Brings a volume online. |
vos_partinfo(1) | Reports the available and total space on a partition. |
vos_release(1) | Updates read-only volumes to match the read/write source volume. |
vos_remaddrs(1) | Removes a file server machine's entry from the VLDB. |
vos_remove(1) | Removes a volume from a site. |
vos_remsite(1) | Removes a read-only site definition from a VLDB entry. |
vos_rename(1) | Renames a volume. |
vos_restore(1) | Converts an ASCII dump file into an AFS volume. |
vos_setaddrs(1) | Set new addresses for a file server's entry in the VLDB. |
vos_setfields(1) | Sets the quota or clear the access counter on a volume. |
vos_shadow(1) | Creates a shadow copy of a volume on a different server/partition. |
vos_size(1) | Computes the size of a volume dump. |
vos_status(1) | Reports a Volume Server's status. |
vos_syncserv(1) | Verifies VLDB entries that mention a specified site. |
vos_syncvldb(1) | Verifies VLDB entries for volumes residing at specified site. |
vos_unlock(1) | Unlocks a single VLDB entry. |
vos_unlockvldb(1) | Unlocks several locked VLDB entries. |
vos_zap(1) | Removes a volume from its site without writing to the VLDB. |
xstat_cm_test(1) | Displays data collections from the Cache Manager. |
xstat_fs_test(1) | Displays data collections from the File Server process. |