Manual pages
Scope: NUT Manual.
| [ Alias ↣ ] Name (section) | Brief |
|---|---|
| al175(8) | Driver for Eltek UPS models with AL175 alarm module. |
| apcsmart(8) | Driver for American Power Conversion Smart Protocol UPS equipment. |
| apcsmart-old(8) | Driver for American Power Conversion Smart Protocol UPS equipment. |
| apcupsd-ups(8) | Driver for apcupsd client access. |
| bcmxcp(8) | Driver for UPSes supporting the serial BCM/XCP protocol. |
| bcmxcp_usb(8) | Experimental driver for UPSes supporting the BCM/XCP protocol over USB. |
| belkin(8) | Driver for Belkin serial UPS equipment. |
| belkinunv(8) | Driver for Belkin "Universal UPS" and compatible. |
| bestfcom(8) | Driver for Best Power Fortress/Ferrups. |
| bestfortress(8) | Driver for old Best Fortress UPS equipment. |
| bestuferrups(8) | Driver for Best Power Micro-Ferrups. |
| bestups(8) | Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment. |
| blazer_ser(8) | Driver for Megatec/Q1 protocol serial based UPS equipment. |
| blazer_usb(8) | Driver for Megatec/Q1 protocol USB based UPS equipment. |
| clone(8) | UPS driver clone. |
| dummy-ups(8) | Driver for multi-purpose UPS emulation. |
| etapro(8) | Driver for ETA UPS equipment. |
| everups(8) | Driver for Ever UPS models. |
| gamatronic(8) | Driver for Gamatronic UPS equipment. |
| genericups(8) | Driver for contact-closure UPS equipment. |
| hosts.conf(5) | Access control for Network UPS Tools CGI programs. |
| isbmex(8) | Driver for ISBMEX UPS equipment. |
| ivtscd(8) | Driver for the IVT Solar Controller Device. |
| libnutclient(3) | Network UPS Tools high-level client access library. |
| libnutclient_commands(3) | … |
| libnutclient_devices(3) | Device. |
| libnutclient_general(3) | General and utility functions in Network. |
| libnutclient_misc(3) | … |
| libnutclient_tcp(3) | … |
| libnutclient_variables(3) | … |
| liebert(8) | Driver for Liebert contact-closure UPS equipment. |
| liebert-esp2(8) | Driver for Liebert UPS, using the ESP-II serial protocol. |
| masterguard(8) | Driver for Masterguard UPS equipment. |
| metasys(8) | Driver for Meta System UPS equipment. |
| mge-shut(8) | Driver for SHUT Protocol UPS equipment. |
| mge-utalk(8) | Driver for MGE UPS SYSTEMS UTalk protocol equipment. |
| microdowell(8) | Driver for Microdowell Enterprise UPS series. |
| netxml-ups(8) | Driver for Eaton / MGE Network Management Card / Proxy (XML/HTTP Protocol) equipment. |
| nut-ipmipsu(8) | Driver for IPMI Power Supply Units (PSU). |
| nut.conf(5) | UPS definitions for Network UPS Tools. |
| nutclient_authenticate(3) ↣ libnutclient_misc(3) | … |
| nutclient_destroy(3) ↣ libnutclient_general(3) | General and utility functions in Network. |
| nutclient_device_forced_shutdown(3) ↣ libnutclient_misc(3) | … |
| nutclient_device_login(3) ↣ libnutclient_misc(3) | … |
| nutclient_device_master(3) ↣ libnutclient_misc(3) | … |
| nutclient_execute_device_command(3) ↣ libnutclient_commands(3) | … |
| nutclient_get_device_command_description(3) ↣ libnutclient_commands(3) | … |
| nutclient_get_device_commands(3) ↣ libnutclient_commands(3) | … |
| nutclient_get_device_description(3) ↣ libnutclient_devices(3) | Device. |
| nutclient_get_device_num_logins(3) ↣ libnutclient_misc(3) | … |
| nutclient_get_device_rw_variables(3) ↣ libnutclient_variables(3) | … |
| nutclient_get_device_variable_description(3) ↣ libnutclient_variables(3) | … |
| nutclient_get_device_variable_values(3) ↣ libnutclient_variables(3) | … |
| nutclient_get_device_variables(3) ↣ libnutclient_variables(3) | … |
| nutclient_get_devices(3) ↣ libnutclient_devices(3) | Device. |
| nutclient_has_device(3) ↣ libnutclient_devices(3) | Device. |
| nutclient_has_device_command(3) ↣ libnutclient_commands(3) | … |
| nutclient_has_device_variable(3) ↣ libnutclient_variables(3) | … |
| nutclient_logout(3) ↣ libnutclient_misc(3) | … |
| nutclient_set_device_variable_value(3) ↣ libnutclient_variables(3) | … |
| nutclient_set_device_variable_values(3) ↣ libnutclient_variables(3) | … |
| nutclient_tcp_create_client(3) ↣ libnutclient_tcp(3) | … |
| nutclient_tcp_disconnect(3) ↣ libnutclient_tcp(3) | … |
| nutclient_tcp_get_timeout(3) ↣ libnutclient_tcp(3) | … |
| nutclient_tcp_is_connected(3) ↣ libnutclient_tcp(3) | … |
| nutclient_tcp_reconnect(3) ↣ libnutclient_tcp(3) | … |
| nutclient_tcp_set_timeout(3) ↣ libnutclient_tcp(3) | … |
| nutdrv_atcl_usb(8) | Driver for 'ATCL FOR UPS' equipment. |
| nutdrv_qx(8) | Driver for Q* protocol serial and USB based UPS equipment. |
| nutscan(3) | Network UPS Tools (NUT) device discovery library. |
| nutscan_add_device_to_device(3) | Concatenate two devices structure. |
| nutscan_add_option_to_device(3) | Add option data to the specified device. |
| nutscan_cidr_to_ip(3) | Convert a CIDR IP to a range of IP address. |
| nutscan_display_parsable(3) | Display the specified `nutscan_device_t` structure on stdout. |
| nutscan_display_ups_conf(3) | Display the specified `nutscan_device_t` structure on stdout. |
| nutscan_free_device(3) | Free a nutscan_device_t structure created by nutscan_new_device. |
| nutscan_get_serial_ports_list(3) | Get a port list name from a range of port. |
| nutscan_init(3) | Initialize the nutscan library. |
| nutscan_new_device(3) | Create a new nutscan_device_t structure. |
| nutscan_scan_avahi(3) | Scan network for NUT services via mDNS. |
| nutscan_scan_eaton_serial(3) | Scan serial ports for Eaton devices (XCP, SHUT and Q1). |
| nutscan_scan_ipmi(3) | Scan local IPMI devices. |
| nutscan_scan_nut(3) | Scan network for available NUT services. |
| nutscan_scan_snmp(3) | Scan network for SNMP devices. |
| nutscan_scan_usb(3) | Scan NUT compatible USB devices. |
| nutscan_scan_xml_http(3) | Scan network for XML/HTTP devices. |
| nutupsdrv(8) | Generic manual for unified NUT drivers. |
| oneac(8) | Driver for Oneac UPS equipment. |
| optiups(8) | Driver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment. |
| powercom(8) | UPS driver for serial Powercom/Trust/Advice UPS equipment. |
| powerpanel(8) | Driver for PowerPanel Plus compatible UPS equipment. |
| rhino(8) | Driver for Brazilian Microsol RHINO UPS equipment. |
| richcomm_usb(8) | Driver UPS equipment using Richcomm dry-contact to USB solution. |
| riello_ser(8) | Driver for Riello UPS Protocol UPS equipment. |
| riello_usb(8) | Driver for Riello UPS Protocol UPS equipment via USB. |
| safenet(8) | Driver for SafeNet compatible UPS equipment. |
| snmp-ups(8) | Multi-MIB Driver for SNMP UPS equipment. |
| solis(8) | Driver for Brazilian Microsol SOLIS UPS equipment. |
| tripplite(8) | Driver for Tripp-Lite SmartPro UPS equipment. |
| tripplite_usb(8) | Driver for older Tripp Lite USB UPSes (not PDC HID). |
| tripplitesu(8) | Driver for Tripp-Lite SmartOnline (SU) UPS equipment. |
| ups.conf(5) | UPS definitions for Network UPS Tools. |
| upsc(8) | Example lightweight UPS client. |
| upscli_add_host_cert(3) | Register a security rule for an host. |
| upscli_cleanup(3) | Clean-up upsclient module after usage. |
| upscli_connect(3) | Open a connection to a NUT upsd. |
| upscli_disconnect(3) | Disconnect from a UPS server. |
| upscli_fd(3) | Get file descriptor for connection. |
| upscli_get(3) | Retrieve data from a UPS. |
| upscli_init(3) | Initialize upsclient module specifying security properties. |
| upscli_list_next(3) | Retrieve list items from a UPS. |
| upscli_list_start(3) | Begin multi-item retrieval from a UPS. |
| upscli_readline(3) | Read a single response from a UPS. |
| upscli_sendline(3) | Send a single command to a UPS. |
| upscli_splitaddr(3) | Split a listening address into its components. |
| upscli_splitname(3) | Split a UPS definition into its components. |
| upscli_ssl(3) | Check SSL mode for current connection. |
| upscli_strerror(3) | Return string describing error condition. |
| upscli_upserror(3) | Get current error number for connection. |
| upsclient(3) | Network UPS Tools client access library. |
| upscmd(8) | UPS administration program for instant commands. |
| upscode2(8) | Driver for UPScode II compatible UPS equipment. |
| upsd(8) | UPS information server. |
| upsd.conf(5) | Configuration for Network UPS Tools upsd. |
| upsd.users(5) | Administrative user definitions for NUT upsd. |
| upsdrvctl(8) | UPS driver controller. |
| upsimage.cgi(8) | Image-generating helper for upsstats.cgi. |
| upslog(8) | UPS status logger. |
| upsmon(8) | UPS monitor and shutdown controller. |
| upsmon.conf(5) | Configuration for Network UPS Tools upsmon. |
| upsrw(8) | UPS variable administration tool. |
| upssched(8) | Timer helper for scheduling events from upsmon. |
| upssched.conf(5) | Configuration for upssched timer program. |
| upsset.cgi(8) | Web-based UPS administration program. |
| upsset.conf(5) | Configuration for Network UPS Tools upsset.cgi. |
| upsstats.cgi(8) | Web-based UPS status viewer. |
| upsstats.html(5) | HTML template for Network UPS Tools upsstats. |
| usbhid-ups(8) | Driver for USB/HID UPS equipment. |
| victronups(8) | Driver for IMV/Victron UPS unit Match, Match Lite, NetUps. |