Manual pages
Scope: System Administration.
| [ Alias ↣ ] Name (section) | Brief |
|---|---|
| addpart(8) | Tell the kernel about the existence of a partition. |
| agetty(8) | Alternative Linux getty. |
| blkdiscard(8) | Discard sectors on a device. |
| blkid(8) | Locate/print block device attributes. |
| blockdev(8) | Call block device ioctls from the command line. |
| cfdisk(8) | Display or manipulate a disk partition table. |
| chbind(8) | The chbind utility is used to lock a process and its children into using a specific IP number/Inter‐. |
| chcontext(8) | Chcontext allocates a new security context and executes a command in that context. |
| chcpu(8) | Configure CPUs. |
| chmem(8) | Configure memory. |
| chronyd(8) | Chrony daemon. |
| chxid(8) | Assigns a context to a file. |
| ctrlaltdel(8) | Set the function of the Ctrl-Alt-Del combination. |
| delpart(8) | Tell the kernel to forget about a partition. |
| drbd(8) ↣ drbd-8.4(8) | The start and stop script for DRBD. |
| drbd-8.3(8) | The start and stop script for DRBD. |
| drbd-8.4(8) | The start and stop script for DRBD. |
| drbd-9.0(8) | The start and stop script for DRBD. |
| drbd-overview(8) | Overview of all configured DRBD resources. |
| drbd-overview-9.0(8) | Overview of all configured DRBD resources. |
| drbdadm(8) ↣ drbdadm-8.4(8) | Administration tool for DRBD. |
| drbdadm-8.3(8) | Administration tool for DRBD. |
| drbdadm-8.4(8) | Administration tool for DRBD. |
| drbdadm-9.0(8) | Utility for DRBD administration. |
| drbddisk(8) ↣ drbddisk-8.4(8) | Script to mark devices as primary and mount file systems. |
| drbddisk-8.3(8) | Script to mark devices as primary and mount file systems. |
| drbddisk-8.4(8) | Script to mark devices as primary and mount file systems. |
| drbdmeta(8) ↣ drbdmeta-8.4(8) | DRBD's meta data management tool. |
| drbdmeta-8.3(8) | DRBD's meta data management tool. |
| drbdmeta-8.4(8) | DRBD's meta data management tool. |
| drbdmeta-9.0(8) | Manipulate the DRBD on-disk metadata. |
| drbdmon(8) ↣ drbdmon-9.0(8) | Monitor DRBD resources realtime. |
| drbdmon-9.0(8) | Monitor DRBD resources realtime. |
| drbdsetup(8) ↣ drbdsetup-8.4(8) | Setup tool for DRBD. |
| drbdsetup-8.3(8) | Setup tool for DRBD. |
| drbdsetup-8.4(8) | Setup tool for DRBD. |
| drbdsetup-9.0(8) | Configure the DRBD kernel module. |
| exec-cd(8) | Executes commands within a safely changed cwd. |
| fdformat(8) | Low-level format a floppy disk. |
| fdisk(8) | Manipulate disk partition table. |
| findfs(8) | Find a filesystem by label or UUID. |
| findmnt(8) | Find a filesystem. |
| fsck(8) | Check and repair a Linux filesystem. |
| fsck.cramfs(8) | Fsck compressed ROM file system. |
| fsck.minix(8) | Check consistency of Minix filesystem. |
| fsfreeze(8) | Suspend access to a filesystem (Ext3/4, ReiserFS, JFS, XFS). |
| fstrim(8) | Discard unused blocks on a mounted filesystem. |
| getty(8) ↣ agetty(8) | Alternative Linux getty. |
| hwclock(8) | Time clocks utility. |
| i386(8) ↣ setarch(8) | Change reported architecture in new program environment and set personality flags. |
| ipv6calc(8) | … |
| isosize(8) | Output the length of an iso9660 filesystem. |
| ldattach(8) | Attach a line discipline to a serial line. |
| lockfs_mount_helper(8) | Helper script for the mount command. |
| losetup(8) | Set up and control loop devices. |
| lsbilibop(8) | List BILIBOP tagged devices, display or update some of their udev properties. |
| lsblk(8) | List block devices. |
| lslocks(8) | List local system locks. |
| lsns(8) | List namespaces. |
| lsxid(8) | Shows the context which is associated to a file. |
| mkfs(8) | Build a Linux filesystem. |
| mkfs.bfs(8) | Make an SCO bfs filesystem. |
| mkfs.cramfs(8) | Make compressed ROM file system. |
| mkfs.minix(8) | Make a Minix filesystem. |
| mkswap(8) | Set up a Linux swap area. |
| mount(8) | Mount a filesystem. |
| mount.lockfs(8) ↣ lockfs_mount_helper(8) | Helper script for the mount command. |
| mtr(8) | A network diagnostic tool. |
| mtr-packet(8) | Send and receive network probes. |
| naddress(8) | Bind to an ip and execute a program. |
| nattribute(8) | Sets/gets attributes of network contexts. |
| ncontext(8) | Manages the creation of network contexts. |
| partx(8) | Tell the kernel about the presence and numbering of on-disk partitions. |
| pivot_root(8) | Change the root filesystem. |
| plymouth(8) | A graphical boot system and logger. |
| plymouthd(8) | The plymouth daemon. |
| popa3d(8) | Post Office Protocol (POP3) server. |
| powertop(8) | A power consumption and power management diagnosis tool. |
| ql-dynamic-tgt-lun-disc(8) | Scans for newly added LUNs. |
| ql-hba-snapshot(8) | Display specific information of the QLogic HBA. |
| ql-lun-state-online(8) | Scans for all offline LUNs and enables them. |
| ql-set-cmd-timeout(8) | Set the timeout on the devices connected to the QLogic FC HBA. |
| raw(8) | Bind a Linux raw character device. |
| readprofile(8) | Read kernel profiling information. |
| reducecap(8) | The reducecap utility is used to lower the capability ceiling of a process and child process. |
| resizepart(8) | Tell the kernel about the new size of a partition. |
| rfkill(8) | Tool for enabling and disabling wireless devices. |
| rtcwake(8) | Enter a system sleep state until specified wakeup time. |
| scanlogd(8) | Detects and logs TCP port scans. |
| setarch(8) | Change reported architecture in new program environment and set personality flags. |
| setattr(8) | Sets vserver specific file attributes. |
| sfdisk(8) | Display or manipulate a disk partition table. |
| showattr(8) | Shows vserver specific file attributes. |
| sulogin(8) | Single-user login. |
| swaplabel(8) | Print or change the label or UUID of a swap area. |
| swapoff(8) ↣ swapon(8) | Enable/disable devices and files for paging and swapping. |
| swapon(8) | Enable/disable devices and files for paging and swapping. |
| switch_root(8) | Switch to another filesystem as the root of the mount tree. |
| sysctl(8) | Configure kernel parameters at runtime. |
| udisks(8) | Disk Manager. |
| umount(8) | Unmount file systems. |
| umount.udisks2(8) | Unmount file systems that have been mounted by UDisks2. |
| uruk(8) | … |
| uruk-save(8) | … |
| urukctl(8) | … |
| utf7decode(1) ↣ utf7encode(1) | Filter to encode UTF-7. |
| utf7encode(1) | Filter to encode UTF-7. |
| uuidd(8) | UUID generation daemon. |
| vapt-get(8) | Apt-get for vservers. |
| vattribute(8) | Sets/gets attributes of vservers. |
| vcontext(8) | Manages the creation of security contexts. |
| vdevmap(8) | Manages device mappings. |
| vdispatch-conf(8) | Dispatch-conf for vservers. |
| vdlimit(8) | Manages disk limits. |
| vdu(8) | Calculates the size of a directory. |
| vemerge(8) | Emerge for vservers. |
| vesync(8) | Portage cache sync for vservers. |
| vhtop(8) | The vhtop utility is simply a wrapper for the htop program. |
| viotop(8) | The viotop utility is simply a wrapper for the iotop program. |
| vkill(8) | Sends signals to processes within other contexts. |
| vlimit(8) | Limits context-resources. |
| vmemctrl(8) | Control the OOM bias for vservers. |
| vmount(8) | Mount for guests. |
| vmstat(8) | Report virtual memory statistics. |
| vnamespace(8) | Manages spaces. |
| vps(8) | The vps utility is simply a wrapper for the ps program. |
| vpstree(8) | The vpstree utility is simply a wrapper for the pstree program. |
| vrpm(8) | Is simply a wrapper for the rpm utility. |
| vrsetup(8) | Set up and control vroot devices. |
| vsched(8) | Modifies scheduling parameters. |
| vserver(8) | The vserver utility enables you to manage the state of vservers, including building, starting, stop‐. |
| vserver-build(8) | Initializes a vserver. |
| vserver-info(8) | Returns information about vservers. |
| vserver-stat(8) | Shows information about active contexts. |
| vshelper(8) | Userspace reboot helper. |
| vsomething(8) | Execute something for a set of vservers. |
| vspace(8) | Manages spaces. |
| vtag(8) | Sets the process's filesystem tag. |
| vtop(8) | The vtop utility is simply a wrapper for the top program. |
| vuname(8) | Modifies and shows uname entries of vserver contexts. |
| vupdateworld(8) | Emerge world for vservers. |
| vurpm(8) | Urpmi/urpme for vservers. |
| vwait(8) | Waits for a context to finish. |
| vyum(8) | Yum for vservers. |
| watchcatd(8) | Process monitoring daemon. |
| watchcatd.conf(5) | Configuration file for watchcatd(8). |
| wdctl(8) | Show hardware watchdog status. |
| wipefs(8) | Wipe a signature from a device. |
| wlock(1) | Tests or sets a file with POSIX-fcntl() write-locks. |
| zramctl(8) | Set up and control zram devices. |