0XFFFF(1) - Linux man page online | User commands

Open Free Fiasco Firmware Flasher, version 0.7.

Dec 25 2016
0xFFFF(1) General Commands Manual 0xFFFF(1)


0xFFFF - Open Free Fiasco Firmware Flasher, version 0.7


0xFFFF [options]


0xFFFF is Open Free Fiasco Firmware Flasher for Maemo devices. It support generating and unpacking FIASCO images on local computer. Useful for editing Maemo firmware package for future flash. It support via USB flashing any image type to Maemo device and also "cold" flashing which means flashing dead device with erased bootloader. There is support for booting kernel via USB without flashing to NAND and also changing configuration of Maemo device (enable/disable R&D mode, changing HW revision strings, ...). 0xFFFF is alternative tool to proprietary Nokia flasher-3.5 and fiasco-gen. 0xFFFF gener‐ ate compatible FIASCO images and also accept FIASCO images generated by Nokia fiasco-gen. Operations: -b [cmdline] boot default or loaded kernel (default: no cmdline) -b update boot default or loaded kernel to Update mode -r reboot device -l load kernel and initfs images to RAM -f flash all specified images -c cold flash 2nd and secondary images -x [/dev/mtd] check for bad blocks on mtd device (default: all) -E file dump all device images to one fiasco image -e [dir] dump all device images (or one -t) to directory (default: current) Device configuration: -I identify, show all information about device -D 0|1|2 change root device: 0 - flash, 1 - mmc, 2 - usb -U 0|1 disable/enable USB host mode -R 0|1 disable/enable R&D mode -F flags change R&D flags, flags are comma separated list, can be empty -H rev change HW revision -N ver change NOLO version string -K ver change kernel version string -T ver change initfs version string -S ver change SW release version string -C ver change content eMMC version string Input image specification: -M file specify fiasco image -m arg specify normal image arg is [[[dev:[hw:]]ver:]type:]file[%lay] dev is device name string (default: empty) hw are comma separated list of HW revisions (default: empty) ver is image version string (default: empty) type is image type (default: autodetect) file is image file name lay is layout file name (default: none) Image filters: -t type filter images by type -d dev filter images by device -w hw filter images by HW revision Fiasco image: -u [dir] unpack fiasco image to directory (default: current) -g file[%sw] generate fiasco image with SW rel version (default: no version) Other options: -i identify images -s simulate, do not flash or write on disk -n disable hash, checksum and image type checking -v be verbose and noisy -h show this help message R&D flags: no-omap-wd disable auto reboot by OMAP watchdog no-ext-wd disable auto reboot by external watchdog no-lifeguard-reset disable auto reboot by software lifeguard serial-console enable serial console no-usb-timeout disable usb timeout for flashing sti-console enable sti console no-charging disable battery charging force-power-key force omap boot reason to power key Supported devices: SU-18 Nokia 770 RX-34 Nokia N800 RX-44 Nokia N810 RX-48 Nokia N810 Wimax RX-51 Nokia N900 RM-680 Nokia N950 RM-696 Nokia N9 Supported image types: xloader 2nd secondary kernel initfs rootfs mmc cmt-2nd cmt-algo cmt-mcusw Supported connection protocols: Local on device NOLO via USB Cold flashing via USB Mk II protocol via USB RAW disk via USB


Via USB: Identify device: $ 0xFFFF -I Load kernel & initfs and boot it with cmdline: $ 0xFFFF -m initfs:<file> -m kernel:<file> -l -b "<cmdline>" Flash kernel and reboot: $ 0xFFFF -m kernel:<file> -f -r Flash FIASCO image and reboot: $ 0xFFFF -M <file> -f -r Flash only kernel from FIASCO image and reboot: $ 0xFFFF -M <file> -t kernel -f -r Cold-Flash 2nd and secondary bootloaders: $ 0xFFFF -m 2nd:<file> -m secondary:<file> -c On device (need nanddump from mtd-utils): Dump all images to current directory: $ 0xFFFF -e Dump all images to one FIASCO file: $ 0xFFFF -E <file> FIASCO packaging: Show FIASCO image content: $ 0xFFFF -M <file> -i Unpack FIASCO image to current directory: $ 0xFFFF -M <file> -u Generate new FIASCO image image.fiasco from files xloader.bin, nolo.bin, zImage, rootfs and append device&version information (xloader for RX-51 hw revision: 2101 and 2102, ver‐ sion 1.0) $ 0xFFFF -m RX-51:2101,2102:1.0:xloader:xloader.bin -m RX-51:2101,2102:1.0:secondary:nolo.bin ↲ -m 2.6.28:kernel:zImage -m rootfs -g image.fiasco
0xFFFF 0.7 Dec 25 2016 0xFFFF(1)
Download raw manual
Index General Commands Manual (+12866) 0xFFFF 0.7 (+1) № 1 (+39907)
Go top