SIMPLE SOLUTIONS

MODULEFRN.CONF(5) - Linux man page online | File formats

Configuration file for the SvxLink server Free Radio Network (FRN) module.

Chapter
MARS 2013
MODULEFRN.CONF(5) File Formats MODULEFRN.CONF(5)

NAME

ModuleFrn.conf - Configuration file for the SvxLink server Free Radio Network (FRN) module

DESCRIPTION

svxlink is a general purpose voice service system for ham radio use. This man-page describe the SvxLink server configuration for the FRN module. The FRN module is used to connect to Free Radio Network (FRN) servers.

CONFIGURATION VARIABLES

There are a couple of configuration variables that are common to all modules. The docu‐ mentation for these can be found in the svxlink.conf(5) manual page. Here is the description of all module specific configuration variables that the SvxLink FRN module understands. ModuleFrn SERVER Free Radio Network (FRN) server hostname or ip address, you can find a list of active servers using FRN desktop application or at http://freeradionetwork.eu web page. PORT FRN server port number SERVER_BACKUP Free Radio Network (FRN) backup server hostname or ip address. When connectivity to main SERVER is not possible connection will fallback to this server. PORT_BACKUP FRN backup server port number VERSION Identify itself as a FRN client with this version. EMAIL_ADDRESS Your email address, which was used during registration. DYN_PASSWORD Password provided to you by FRN on registration. CLIENT_TYPE Type of the client: 0 - crosslink 1 - gateway 2 - pc only Read more at http://freeradionetwork.eu/frnprotocol.htm web page. CALLSIGN_AND_USER Your callsign and user name used during registration, for example "1234, Bob". BAND_AND_CHANNEL In case of PC only user, this is 'PC Only'. In case of a crosslink this is 'Crosslink'. In case of a gateway this is the frequancy in full Mhz and kHz sepa‐ rated by a '.' (dot), followed by the mode 'FM', 'AM' or 'DIG', followed by a space and the squelch type 'CTC', 'DSC' or 'NONE' followed by the CTC frequency or ID code. Examples: 446.03125FM CTC131.8 28.12500AM 145.43750FM DCS828 446.02625DIG CID123 DESCRIPTION Custom extra information about the node. COUNTRY Full name of the country. CITY_CITY_PART The city and the part of the city, or the part of the country and the city divided by a minus sign, for example "City - Street". NET Network (room) where to connect, each server holds up to 32 networks (rooms). FRN_DEBUG Define to enable extensive module logging, including FRN request and response printout. DISABLE_RF Define to disable sending voice from FRN to RIG. Nothing will be transmitted by radio (could be switched ON by DTMF command later if needed)

FRN NEW USER REGISTRATION

To register at FRN service it is possible to use native desktop client or just register using netcat: echo 'IG:\ <ON>[CallsignAndUser]</ON>\ <EA>[EMailAddress]</EA>\ <BC>[BandAndChannel]</BC>\ <DS>[Description]</DS>\ <NN>[Country]</NN>\ <CT>[CityCityPart]</CT>' | nc -v sysman.freeradionetwork.eu 10025 FRN System Manager should return OK in case of successful registration. More information about new user registration is available at http://freeradionet‐ work.eu/frnprotocol.htm

FILES

/etc/svxlink/svxlink.conf (or deprecated /etc/svxlink.conf) The system wide configuration file. ~/.svxlink/svxlink.conf Per user configuration file. /etc/svxlink/svxlink.d/ModuleFrn.conf Global modularized configuration file. Depends on the CFG_DIR configuration vari‐ able setting. ~/.svxlink/svxlink.d/ModuleFrn.conf Per user modularized configuration file. Depends on the CFG_DIR configuration vari‐ able setting.

AUTHOR

Tobias Blomberg (SM0SVX) <sm0svx at users dot sourceforge dot net>

SEE ALSO

svxlink.conf(5)
Linux MARS 2013 MODULEFRN.CONF(5)
This manual Reference Other manuals
ModuleFrn.conf(5) referred by
refer to svxlink.conf(5)
Download raw manual
Index File Formats (+47) Linux (+1529) № 5 (+2141)
Go top