ACCT_GATHER.CONF(5) - man page online | file formats
Slurm configuration file for the acct_gather plugins.
Slurm Configuration File
acct_gather.conf(5) Slurm Configuration File acct_gather.conf(5)
NAMEacct_gather.conf - Slurm configuration file for the acct_gather plugins
DESCRIPTIONacct_gather.conf is an ASCII file which defines parameters used by Slurm's acct_gather related plugins. The file location can be modified at system build time using the DEFAULT_SLURM_CONF parameter or at execution time by setting the SLURM_CONF environment variable. The file will always be located in the same directory as the slurm.conf file. Parameter names are case insensitive. Any text following a "#" in the configuration file is treated as a comment through the end of that line. The size of each line in the file is limited to 1024 characters. Changes to the configuration file take effect upon restart of Slurm daemons, daemon receipt of the SIGHUP signal, or execution of the command "scon‐ trol reconfigure" unless otherwise noted. The following acct_gather.conf parameters are defined to control the general behavior of various plugins in Slurm. The acct_gather.conf file is different than other Slurm .conf files. Each plugin defines which options are available. So if you do not load the respective plugin for an option that option will appear to be unknown by Slurm and could cause Slurm not to load. If you decide to change plugin types you might also have to change the related options as well. EnergyIPMI Options used for AcctGatherEnergyType/ipmi are as follows: EnergyIPMIFrequency=<number> This parameter is the number of seconds between BMC access samples. EnergyIPMICalcAdjustment=<yes|no> If set to "yes", the consumption between the last BMC access sample and a step consumption update is approximated to get more accurate task con‐ sumption. The adjustment is made at the step start and each time the consumption is updated, including the step end. The approximations are not accumulated, only the first and last adjustments are used to calcu‐ lated the consumption. The default is "no". EnergyIPMIPowerSensors=<key=values> Optionally specify the ids of the sensors to used. Multiple <key=values> can be set with ";" separators. The key "Node" is mandatory and is used to know the consumed energy for nodes (scontrol show node) and jobs (sacct). Other keys are optional and are named by administrator. These keys are useful only when profile is activated for energy to store power (in watt) of each key. <values> are integers, multiple values can be set with "," separators. The sum of the listed sensors is used for each key. EnergyIPMIPowerSensors is optional, default value is "Node=number" where "number" is the id of the first power sensor returned by ipmi-sensors. i.e. EnergyIPMIPowerSen‐ sors=Node=16,19,23,26;Socket0=16,23;Socket1=19,26;SSUP=23,26;KNC=16,19 EnergyIPMIPowerSensors=Node=29,32;SSUP0=29;SSUP1=32 EnergyIPMIPowerSensors=Node=1280 The following acct_gather.conf parameters are defined to control the IPMI config default values for libipmiconsole. EnergyIPMIUsername=USERNAME Specify BMC Username. EnergyIPMIPassword=PASSWORD Specify BMC Password. ProfileHDF5 Options used for AcctGatherProfileType/hdf5 are as follows: ProfileHDF5Dir=<path> This parameter is the path to the shared folder into which the acct_gather_profile plugin will write detailed data (usually as an HDF5 file). The directory is assumed to be on a file system shared by the controller and all compute nodes. This is a required parameter. ProfileHDF5Default A comma delimited list of data types to be collected for each job submis‐ sion. Allowed values are: All All data types are collected. (Cannot be combined with other val‐ ues.) None No data types are collected. This is the default. (Cannot be combined with other values.) Energy Energy data is collected. Filesystem File system (Lustre) data is collected. Network Network (InfiniBand) data is collected. Task Task (I/O, Memory, ...) data is collected. InfinibandOFED Options used for AcctGatherInfinbandType/ofed are as follows: InfinibandOFEDPort=<number> This parameter represents the port number of the local Infiniband card that we are willing to monitor. The default port is 1.
EXAMPLE### # Slurm acct_gather configuration file ### # Parameters for AcctGatherEnergy/impi plugin EnergyIPMIFrequency=10 EnergyIPMICalcAdjustment=yes # # Parameters for AcctGatherProfileType/hdf5 plugin ProfileHDF5Dir=/app/slurm/profile_data # Parameters for AcctGatherInfiniband/ofed plugin InfinibandOFEDPort=1
COPYINGCopyright (C) 2012-2013 Bull. Produced at Bull (cf, DISCLAIMER). This file is part of Slurm, a resource management program. For details, see <http://slurm.schedmd.com/>. Slurm is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
April 2015 Slurm Configuration File acct_gather.conf(5)
|This manual||Reference||Other manuals|