SIMPLE SOLUTIONS

ACPI_FUJITSU(4FREEBSD) - Linux man page online | Special files

Fujitsu Laptop Extras.

Chapter
February 8, 2010
ACPI_FUJITSU(4) BSD Kernel Interfaces Manual ACPI_FUJITSU(4)

NAME

acpi_fujitsu — Fujitsu Laptop Extras

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configura‐ tion file: device acpi_fujitsu Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): acpi_fujitsu_load="YES"

DESCRIPTION

The acpi_fujitsu driver enables the ACPI-controlled buttons on Fujitsu notebooks. The but‐ ton events are sent to userspace via devd(8), and a sysctl(8) interface is provided to simu‐ late the hardware events. Using this driver, one can control the brightness of the display, the volume of the speak‐ ers, and the internal (eraserhead) mouse pointer.

SYSCTL VARIABLES

These sysctls are currently implemented: hw.acpi.fujitsu.lcd_brightness Makes the LCD backlight brighter or dimmer. hw.acpi.fujitsu.pointer_enable Enables or disables the internal mouse pointer. hw.acpi.fujitsu.volume Controls the speaker volume. hw.acpi.fujitsu.mute Mutes the speakers. Defaults for these sysctls can be set in sysctl.conf(5).

EXAMPLES

The following can be added to devd.conf(5) in order to pass button events to a /usr/local/sbin/acpi_oem_exec.sh script: notify 10 { match "system" "ACPI"; match "subsystem" "FUJITSU"; action "/usr/local/sbin/acpi_oem_exec.sh $notify fujitsu"; }; A possible /usr/local/sbin/acpi_oem_exec.sh script might look like: #!/bin/sh # if [ "$1" = "" -o "$2" = "" ] then echo "usage: $0 notify oem_name" exit 1 fi NOTIFY=`echo $1` LOGGER="logger" CALC="bc" BC_PRECOMMANDS="scale=2" ECHO="echo" CUT="cut" MAX_LCD_BRIGHTNESS=7 MAX_VOLUME=16 OEM=$2 DISPLAY_PIPE=/tmp/acpi_${OEM}_display case ${NOTIFY} in 0x00) LEVEL=`sysctl -n hw.acpi.${OEM}.mute` if [ "$LEVEL" = "1" ] then MESSAGE="volume muted" else MESSAGE="volume unmuted" fi ;; 0x01) LEVEL=`sysctl -n hw.acpi.${OEM}.pointer_enable` if [ "$LEVEL" = "1" ] then MESSAGE="pointer enabled" else MESSAGE="pointer disabled" fi ;; 0x02) LEVEL=`sysctl -n hw.acpi.${OEM}.lcd_brightness` PERCENT=`${ECHO} "${BC_PRECOMMANDS} ; \ ${LEVEL} / ${MAX_LCD_BRIGHTNESS} * 100" |\ ${CALC} | ${CUT} -d . -f 1` MESSAGE="brightness level ${PERCENT}%" ;; 0x03) LEVEL=`sysctl -n hw.acpi.${OEM}.volume` PERCENT=`${ECHO} "${BC_PRECOMMANDS} ; \ ${LEVEL} / ${MAX_VOLUME} * 100" | \ ${CALC} | ${CUT} -d . -f 1` MESSAGE="volume level ${PERCENT}%" ;; *) ;; esac ${LOGGER} ${MESSAGE} if [ -p ${DISPLAY_PIPE} ] then ${ECHO} ${MESSAGE} >> ${DISPLAY_PIPE} & fi exit 0

SEE ALSO

acpi(4), sysctl.conf(5), devd(8), sysctl(8)

HISTORY

The acpi_fujitsu driver first appeared in FreeBSD 5.4.

AUTHORS

The acpi_fujitsu driver was written by Sean Bullington <@gmail.com>, Anish Mistry <@osu.edu>, and Marc Santcroos <@ripe.net>. This manual page was written by Philip Paeps <@FreeBSD.org>.
BSD February 8, 2010 BSD
This manual Reference Other manuals
acpi_fujitsu(4freebsd) referred by
refer to acpi(4freebsd) | sysctl(8) | sysctl.conf(5)
Download raw manual
Main page BSD Kernel Interfaces Manual (+773) BSD (+3984) № 4 (+981)
Go top