AMAVISD-MILTER(8) - Linux man page online | Administration and privileged commands

Sendmail milter for amavisd-new.

amavisd-milter(8) BSD System Manager's Manual amavisd-milter(8)


amavisd-milter — sendmail milter for amavisd-new


amavisd-milter [-fhv] [-d debug-level] [-D delivery-care-of] [-m max-conns] [-M max-wait] [-p pidfile] [-P] [-q backlog] [-s socket] [-t timeout] [-S socket] [-T timeout] [-w directory]


The amavisd-milter is a sendmail milter (mail filter) for amavisd-new 2.4.3 and above and sendmail 8.13 and above (limited support for 8.12 is provided). Instead of older amavis-milter helper program, full amavisd-new functionality is available, including adding spam and virus information header fields, modifying Subject, adding address extensions and removing certain recipients from delivery while delivering the same message to the rest. For more information you can visit amavisd-milter website: and SourceForge project: Options The options are as follows: -d debug-level Set the debug level to debug-level. Debugging traces become more verbose as the debug level increases. Maximum is 9. -D delivery-care-of Set AM.PDP request attribute delivery_care_of to client (default) or server. When client method is used then amavisd-milter is responsible to forward the message to recipients. This method doesn't allow personalized header or body modification. When server method is used then amavisd-new is responsible to forward the message to recipients and can provide personalized header and body modification. $for‐ ward_method in amavisd.conf must point to some place willing to accept mail without further checking in amavisd-new. -f Run amavisd-milter in the foreground (i.e. do not daemonize). Print debug messages to the terminal. -h Print help page and exit. -m max-conns Maximum concurrent amavisd connections (default 0 - unlimited number of connec‐ tions). It must agree with the $max_servers entry in amavisd.conf. -M max-wait Maximum wait for connection to amavisd in seconds (default 300 = 5 minutes). It must be less then sending MTA timeout for a response to the final "." that termi‐ nates a message on sending MTA. sendmail has default value 1 hour, postfix 10 min‐ utes and qmail 20 minutes. We suggest to use less than 10 minutes. -p pidfile Use this pid file (default /var/run/amavis/ -P When amavisd-new fails mail will be passed through unchecked. -q backlog Sets the incoming socket backlog used by listen(2). If it is not set or set to zero, the operating system default is used. -s socket Communication socket between sendmail and amavisd-milter (default /var/lib/amavis/amavisd-milter.sock). The protocol spoken over this socket is MILTER (Mail FILTER). It must agree with the INPUT_MAIL_FILTER entry in The socket should be in "proto:address" format: · {unix|local}:/path/to/file - A named pipe. · inet:port@{hostname|ip-address} - An IPV4 socket. · inet6:port@{hostname|ip-address} - An IPV6 socket. -S socket Communication socket between amavisd-milter and amavisd-new (default /var/lib/amavis/amavisd.sock). The protocol spoken over this socket is AM.PDP (AMavis Policy Delegation Protocol). It must agree with the $unix_socketname entry in amavisd.conf. The socket should be in "proto:address" format: · {unix|local}:/path/to/file - A named pipe. -t timeout sendmail connection timeout in seconds (default 600 = 10 minutes). It must agree with the INPUT_MAIL_FILTER entry in and must be greater than or equal to the amavisd-new connection timeout. When you use other milters (especially time- consuming), the timeout must be sufficient to process message in all milters. -T timeout amavisd-new connection timeout in seconds (default 600 = 10 minutes). This timeout must be sufficient for message processing in amavisd-new. It's usually a good idea to adjust them to the same value as sendmail connection timeout. -v Report the version number and exit. -w directory Set working directory (default /var/lib/amavis/tmp). Limited support for sendmail 8.12 · smfi_addheader() is used instead of smfi_insheader() for insheader and addheader AM.PDP responses. This works well with amavisd-new 2.4.3 or newer. · smfi_progress() isn't called when amavisd-milter wait for amavisd-new communication socket. · AM.PDP response quarantine isn't implemented.


/var/run/amavis/ The default process-id file. /var/lib/amavis/amavisd-milter.sock The default sendmail communication socket. /var/lib/amavis/amavisd.sock Th default amavisd-new communication socket. /var/lib/amavis/tmp The default working directory.


When remote client is authenticated, amavisd-milter forward this information to amavisd-new through AM.PDP request attribute policy_bank: SMTP_AUTH Indicate that the remote client is authenticated. SMTP_AUTH_<MECH> Remote client authentication mechanism. SMTP_AUTH_<MECH>_<BITS> The number of bits used for the key of the symmetric cipher when authentication mechanism use it.


Configuring amavisd-new In amavisd.conf file change protocol and socket settings to: $protocol = "AM.PDP"; # Use AM.PDP protocol $unix_socketname = "$MYHOME/amavisd.sock"; # Listen on Unix socket ### $inet_socket_port = 10024; # Don't listen on TCP port Then (re)start amavisd daemon. Configuring sendmail To the file add the following entries: define(`confMILTER_MACROS_ENVFROM', confMILTER_MACROS_ENVFROM`, r, b') INPUT_MAIL_FILTER(`amavisd-milter', `S=local:/var/lib/amavis/amavisd-milter.sock, F=T, T=S:10m;R:10m;E:10m') Then rebuild your file, install it (usually to /etc/mail/ and (re)start sendmail daemon. Running amavisd-milter This example assume that amavisd-new is running as user amavis. It must agree with the entry $daemon_user in amavisd.conf. First create working directory: mkdir /var/lib/amavis/tmp chmod 750 /var/lib/amavis/tmp chown amavis /var/lib/amavis/tmp Then start amavisd-milter as non-priviledged user amavis: su - amavis -c "amavisd-milter -w /var/lib/amavis/tmp" Limiting maximum concurrent connections to amavisd To limit concurrent connections to 4 and fail after 10 minutes (10*60 secs) of waiting run amavisd-milter with this options: su - amavis -c "amavisd-milter -w /var/lib/amavis/tmp -m 4 -M 600" Troubleshooting For troubleshooting run amavisd-milter on the foreground and set debug level to appropriate level: su - amavis -c "amavisd-milter -w /var/lib/amavis/tmp -f -d level" where debug levels are: 1 Not errors but unexpected states (connection abort etc). 2 Main states in message processing. 3 All amavisd-milter debug messages. 4-9 Milter communication debugging (smfi_setdbg 1-6).



This manual page was written by Petr Rehor <> and is based on Jerzy Sakol <> initial work.


A community mailing lists are available at: Enhancements, requests and problem reports are welcome. If you run into problems first check the users mailing list archive before asking questions on the list. It's highly likely somebody has already come across the same problem and it's been solved.
BSD Januar 23, 2006 BSD
This manual Reference Other manuals
amavisd-milter(8) referred by
refer to listen(2)
Download raw manual
Index client (+1) remote (+1) № 8 (+5755)
Go top