AMCHECKDUMP(8) - Linux man page online | Administration and privileged commands
Check the results of an Amanda dump.
AMCHECKDUMP(8) System Administration Commands AMCHECKDUMP(8)
Amanda 3.5.1 12/01/2017 AMCHECKDUMP(8)
NAMEamcheckdump - check the results of an Amanda dump
SYNOPSISamcheckdump [--timestamp|-t timestamp] [--verbose] [-o configoption...] config
DESCRIPTIONAmcheckdump verifies Amanda dump images by reading them from storage volume(s) and verifying that the images can be parsed by the appropriate application (if available). For example, a GNUTAR image is passed to GNU Tar for parsing, and any errors (e.g., corrupt or missing data) are noted. The application runs on the most recent dump or, if --timestamp is specified, on the most recent dump with that timestamp. Note that the verification is local to the Amanda server; if the dump application is not available, or is configured differently on the server than on the client, then the verification will most likely fail. If a changer is available, it is used to load the required tapes. Otherwise, the application interactively requests the tapes. See the "CONFIGURATION OVERRIDE" section in amanda(8) for information on the -o option.
EXAMPLE# check the most recent dump amcheckdump MYCONFIG # check a specific dump from back in '78 amcheckdump MYCONFIG --timestamp 19780615
SEE ALSOamanda(8), amcheck(8) The Amanda Wiki: : http://wiki.zmanda.com/
AUTHORIan Turner <@zmanda.com> Zmanda, Inc. (http://www.zmanda.com)
|This manual||Reference||Other manuals|
|amcheckdump(8)||referred by||amanda(8) | amanda-compatibility(7)|
|refer to||amanda(8) | amcheck(8)|