pragmatism first

ANTLR(1) - Linux manual page online | User commands

ANother Tool for Language Recognition.

September 1995
ANTLR(1) PCCTS Manual Pages ANTLR(1)


antlr - ANother Tool for Language Recognition


antlr [options] grammar_files


Antlr converts an extended form of context-free grammar into a set of C functions which directly implement an efficient form of deterministic recursive-descent LL(k) parser. Context-free grammars may be augmented with predicates to allow semantics to influence parsing; this allows a form of context-sensitive parsing. Selective backtracking is also available to handle non-LL(k) and even non-LALR(k) constructs. Antlr also produces a def‐ inition of a lexer which can be automatically converted into C code for a DFA-based lexer by dlg. Hence, antlr serves a function much like that of yacc, however, it is notably more flexible and is more integrated with a lexer generator (antlr directly generates dlg code, whereas yacc and lex are given independent descriptions). Unlike yacc which accepts LALR(1) grammars, antlr accepts LL(k) grammars in an extended BNF notation — which elimi‐ nates the need for precedence rules. Like yacc grammars, antlr grammars can use automatically-maintained symbol attribute val‐ ues referenced as dollar variables. Further, because antlr generates top-down parsers, arbitrary values may be inherited from parent rules (passed like function parameters). Antlr also has a mechanism for creating and manipulating abstract-syntax-trees. There are various other niceties in antlr, including the ability to spread one grammar over multiple files or even multiple grammars in a single file, the ability to generate a version of the grammar with actions stripped out (for documentation purposes), and lots more.


-ck n Use up to n symbols of lookahead when using compressed (linear approximation) lookahead. This type of lookahead is very cheap to compute and is attempted before full LL(k) lookahead, which is of exponential complexity in the worst case. In general, the compressed lookahead can be much deeper (e.g, -ck 10) than the full lookahead (which usually must be less than 4). -CC Generate C++ output from both ANTLR and DLG. -cr Generate a cross-reference for all rules. For each rule, print a list of all other rules that reference it. -e1 Ambiguities/errors shown in low detail (default). -e2 Ambiguities/errors shown in more detail. -e3 Ambiguities/errors shown in excruciating detail. -fe file Rename err.c to file. -fh file Rename stdpccts.h header (turns on -gh) to file. -fl file Rename lexical output, parser.dlg, to file. -fm file Rename file with lexical mode definitions, mode.h, to file. -fr file Rename file which remaps globally visible symbols, remap.h, to file. -ft file Rename tokens.h to file. -ga Generate ANSI-compatible code (default case). This has not been rigorously tested to be ANSI XJ11 C compliant, but it is close. The normal output of antlr is cur‐ rently compilable under both K&R, ANSI C, and C++—this option does nothing because antlr generates a bunch of #ifdef's to do the right thing depending on the lan‐ guage. -gc Indicates that antlr should generate no C code, i.e., only perform analysis on the grammar. -gd C code is inserted in each of the antlr generated parsing functions to provide for user-defined handling of a detailed parse trace. The inserted code consists of calls to the user-supplied macros or functions called zzTRACEIN and zzTRACEOUT. The only argument is a char * pointing to a C-style string which is the grammar rule recognized by the current parsing function. If no definition is given for the trace functions, upon rule entry and exit, a message will be printed indicating that a particular rule as been entered or exited. -ge Generate an error class for each non-terminal. -gh Generate stdpccts.h for non-ANTLR-generated files to include. This file contains all defines needed to describe the type of parser generated by antlr (e.g. how much lookahead is used and whether or not trees are constructed) and contains the header action specified by the user. -gk Generate parsers that delay lookahead fetches until needed. Without this option, antlr generates parsers which always have k tokens of lookahead available. -gl Generate line info about grammar actions in C parser of the form # line "file" which makes error messages from the C/C++ compiler make more sense as they will point into the grammar file not the resulting C file. Debugging is easier as well, because you will step through the grammar not C file. -gs Do not generate sets for token expression lists; instead generate a ||-separated sequence of LA(1)==token_number. The default is to generate sets. -gt Generate code for Abstract-Syntax Trees. -gx Do not create the lexical analyzer files (dlg-related). This option should be given when the user wishes to provide a customized lexical analyzer. It may also be used in make scripts to cause only the parser to be rebuilt when a change not affecting the lexical structure is made to the input grammars. -k n Set k of LL(k) to n; i.e. set tokens of look-ahead (default==1). -o dir Directory where output files should go (default="."). This is very nice for keep‐ ing the source directory clear of ANTLR and DLG spawn. -p The complete grammar, collected from all input grammar files and stripped of all comments and embedded actions, is listed to stdout. This is intended to aid in viewing the entire grammar as a whole and to eliminate the need to keep actions concisely stated so that the grammar is easier to read. Hence, it is preferable to embed even complex actions directly in the grammar, rather than to call them as subroutines, since the subroutine call overhead will be saved. -pa This option is the same as -p except that the output is annotated with the first sets determined from grammar analysis. -prc on Turn on the computation and hoisting of predicate context. -prc off Turn off the computation and hoisting of predicate context. This option makes 1.10 behave like the 1.06 release with option -pr on. Context computation is off by default. -rl n Limit the maximum number of tree nodes used by grammar analysis to n. Occasion‐ ally, antlr is unable to analyze a grammar submitted by the user. This rare situa‐ tion can only occur when the grammar is large and the amount of lookahead is greater than one. A nonlinear analysis algorithm is used by PCCTS to handle the general case of LL(k) parsing. The average complexity of analysis, however, is near linear due to some fancy footwork in the implementation which reduces the num‐ ber of calls to the full LL(k) algorithm. An error message will be displayed, if this limit is reached, which indicates the grammar construct being analyzed when antlr hit a non-linearity. Use this option if antlr seems to go out to lunch and your disk start thrashing; try n=10000 to start. Once the offending construct has been identified, try to remove the ambiguity that antlr was trying to overcome with large lookahead analysis. The introduction of (...)? backtracking blocks elimi‐ nates some of these problems — antlr does not analyze alternatives that begin with (...)? (it simply backtracks, if necessary, at run time). -w1 Set low warning level. Do not warn if semantic predicates and/or (...)? blocks are assumed to cover ambiguous alternatives. -w2 Ambiguous parsing decisions yield warnings even if semantic predicates or (...)? blocks are used. Warn if predicate context computed and semantic predicates incom‐ pletely disambiguate alternative productions. - Read grammar from standard input and generate stdin.c as the parser file.


Antlr works... we think. There is no implicit guarantee of anything. We reserve no legal rights to the software known as the Purdue Compiler Construction Tool Set (PCCTS) — PCCTS is in the public domain. An individual or company may do whatever they wish with source code distributed with PCCTS or the code generated by PCCTS, including the incorpo‐ ration of PCCTS, or its output, into commercial software. We encourage users to develop software with PCCTS. However, we do ask that credit is given to us for developing PCCTS. By "credit", we mean that if you incorporate our source code into one of your programs (commercial product, research project, or otherwise) that you acknowledge this fact some‐ where in the documentation, research report, etc... If you like PCCTS and have developed a nice tool with the output, please mention that you developed it using PCCTS. As long as these guidelines are followed, we expect to continue enhancing this system and expect to make other tools available as they are completed.


*.c output C parser. *.cpp output C++ parser when C++ mode is used. parser.dlg output dlg lexical analyzer. err.c token string array, error sets and error support routines. Not used in C++ mode. remap.h file that redefines all globally visible parser symbols. The use of the #parser directive creates this file. Not used in C++ mode. stdpccts.h list of definitions needed by C files, not generated by PCCTS, that reference PCCTS objects. This is not generated by default. Not used in C++ mode. tokens.h output #defines for tokens used and function prototypes for functions generated for rules.


dlg(1), pccts(1)
ANTLR September 1995 ANTLR(1)
This manual Reference Other manuals
antlr(1) referred by antlr3(1) | antlr4(1) | btyacc(1) | dlg(1) | runantlr(1)
refer to dlg(1)
Download raw manual
Index PCCTS Manual Pages (+2) ANTLR (+2) № 1 (+39907)
Go top