AO-CAL-FREQ(1) - Linux manual page online | User commands
Calibrate AltOS flight computer frequency.
Chapter
ao-cal-freq
AO-LOAD(1) General Commands Manual AO-LOAD(1)
ao-cal-freq AO-LOAD(1)
NAME
ao-cal-freq - Calibrate AltOS flight computer frequencySYNOPSIS
ao-cal-freq [-T tty-device] [--tty tty-device] [-D altos-device] [--device altos-device]DESCRIPTION
ao-cal-freq drives the frequency calibration process and saves the result.OPTIONS
-T tty-device | --tty tty-device This selects which tty device the debugger uses to communicate with the target device. The special name 'BITBANG' directs ao-dbg to use the cp2103 connection, otherwise this should be a usb serial port connected to a suitable cc1111 debug node. -D AltOS-device | --device AltOS-device Search for a connected device. This requires an argument of one of the following forms: TeleMega:2 TeleMega 2 Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices.USAGE
ao-cal-freq opens the target device, interactively calibrates the frequency, then shows the resulting calibration values and saves them to configuration memory.AUTHOR
Keith PackardThis manual | Reference | Other manuals |
---|---|---|
ao-cal-freq(1) | referred by | |
refer to | ao-load(1) |