pragmatism first

AO-SEND-TELEM(1) - Linux manual page online | User commands

Re-transmit stored telemetry file.

AO-SEND-TELEM(1) General Commands Manual AO-SEND-TELEM(1)


ao-send-telem - Re-transmit stored telemetry file


ao-send-telem [-T tty-device] [--tty tty-device] [-D altos-device] [--device altos-device] [-F frequency (kHz)] [--frequency frequency (kHz)] [-R] [--realtime] <flight.telem>


-T tty-device | --tty tty-device This selects which tty device ao-dumplog uses to communicate with the target device. -D AltOS-device | --device AltOS-device Search for a connected device. This requires an argument of one of the following forms: TeleDongle:2 TeleDongle 2 Leaving out the product name will cause the tool to select a suitable product, leaving out the serial number will cause the tool to match one of the available devices. -F kHz | --frequency kHz This selects which frequency to send the specified packets on. -R | --realtime This makes the program delay between packets in pad mode. Normally, pad mode pack‐ ets are sent as quickly as possible.


ao-send-telem reads the specified flight telemetry log and re-transmits it via the speci‐ fied ground station device


Keith Packard
ao-send-telem AO-SEND-TELEM(1)
Download raw manual
Index General Commands Manual (+12866) № 1 (+39907)
Go top