ARPFETCH(8) - Linux man page online | Administration and privileged commands

Obtain ethernet/ip address pairings via snmp.

ARPFETCH(8) System Manager's Manual ARPFETCH(8)


arpfetch - obtain ethernet/ip address pairings via snmp


arpfetch host cname


arpfetch gets pairings between ip addresses and the ethernet address of the corresponding network card. These pairings are retrieved from other network entities, like routers, by the SNMP protocol using snmpwalk(1). Mostly, this program is an agent that is used to get data for arpsnmp(8). This fetching of address mappings can be further automated by use of bihourly(8). Both command arguments must be present for proper operation. The host argument is the hostname of the network entity being queried and the cname argument is the SNMP community name of the network entity. The information is presented on stdout in a format compatible with arpsnmp(8) and arp‐ watch(8). Further information about SNMP can be found in snmpcmd(1) and variables(5).


arpsnmp(8), arpwatch(8), bihourly(8), snmpwalk(1), snmpcmd(1), variables(5)


Please send bug reports to


Craig Leres of the Lawrence Berkeley National Laboratory Network Research Group, Universi‐ ty of California, Berkeley, CA. The current version is available via anonymous ftp: This manual page was contributed by Hugo Graumann.
This manual Reference Other manuals
arpfetch(8) referred by bihourly(8)
refer to arpsnmp(8) | arpwatch(8) | bihourly(8) | snmpcmd(1) | snmpwalk(1) | variables(5)
Download raw manual
Index System Manager's Manual (+2060) № 8 (+5755)
Go top