ARPSPOOF(8) - man page online | administration and privileged commands
Intercept packets on a switched LAN.
ARPSPOOF(8) System Manager's Manual ARPSPOOF(8)
NAMEarpspoof - intercept packets on a switched LAN
SYNOPSISarpspoof [-i interface] [-c own|host|both] [-t target] [-r] host
DESCRIPTIONarpspoof redirects packets from a target host (or all hosts) on the LAN intended for another host on the LAN by forging ARP replies. This is an extremely effective way of sniffing traffic on a switch. Kernel IP forwarding (or a userland program which accomplishes the same, e.g. fra‐ grouter(8)) must be turned on ahead of time.
OPTIONS-i interface Specify the interface to use. -c own|host|both Specify which hardware address t use when restoring the arp configuration; while cleaning up, packets can be send with the own address as well as with the address of the host. Sending packets with a fake hw address can disrupt connectivity with certain switch/ap/bridge configurations, however it works more reliably than using the own address, which is the default way arpspoof cleans up afterwards. -t target Specify a particular host to ARP poison (if not specified, all hosts on the LAN). Repeat to specify multiple hosts. -r Poison both hosts (host and target) to capture traffic in both directions. (only valid in conjuntion with -t) host Specify the host you wish to intercept packets for (usually the local gateway).
SEE ALSOdsniff(8), fragrouter(8)
AUTHORDug Song <@monkey.org>
|This manual||Reference||Other manuals|
|arpspoof(8)||referred by||dsniff(8) | sslsplit(1)|