ASEQNET(1) - man page online | user commands
ALSA sequencer connectors over network.
January 1, 2000
aseqnet(1) General Commands Manual aseqnet(1)
NAMEaseqnet - ALSA sequencer connectors over network
DESCRIPTIONaseqnet is an ALSA sequencer client which sends and receives event packets over network. Suppose two hosts connected by network, hostA as a server and hostB as a client. The ALSA sequencer system must be running on both hosts. For creating the server port, run the following on hostA: hostA% aseqnet sequencer opened: 128:0 Then a user client 128 with port 0 was opened on hostA. (The client number may vary.) For creating the (network-)client port, run aseqnet with the hostname of the server: hostB% aseqnet hostA sequencer opened: 132:0 Now all events sent to hostA:128:0 are transferred to hostB:132:0, and vice versa. The ports created by aseqnet can be connected arbitrary to other sequencer ports via acon‐ nect(1). For example, to connect hostB:132:0 to a MIDI output device 65:0: hostB% aconnect 132:0 65:0 Then events to hostA:128:0 will be delivered to hostB:65:0. The following command plays MIDI on hostB. hostA% pmidi -p 128:0 foo.mid The multiple clients may exist simultaneously. If hostC is connected as a client to hostA, events from from hostA are sent to all connected network clients, i.e. hostB and hostC. However, only one connection is allowed from a client to a server. To disconnect network, stop all clients before server by ctrl-C or sending signal to them. The server will automatically quit.
OPTIONS-p port Specify the TCP port number or TCP service name. -s addr Subscribe to the given address for read automatically. -d addr Subscribe to the given address for write automatically. -v Verbose mode.
SEE ALSOaconnect(1), pmidi(1)
January 1, 2000 aseqnet(1)
AUTHORTakashi Iwai <@suse.de>.
|This manual||Reference||Other manuals|
|aseqnet(1)||referred by||aconnect(1) | aconnectgui(1)|
|refer to||aconnect(1) | pmidi(1)|