BCFG2.CONF(5) - Linux man page online | File formats
Configuration parameters for Bcfg2.
November 04, 2014
BCFG2.CONF(5) Bcfg2 BCFG2.CONF(5)
1.4 November 04, 2014 BCFG2.CONF(5)
NAMEbcfg2.conf - Configuration parameters for Bcfg2
DESCRIPTIONbcfg2.conf includes configuration parameters for the Bcfg2 server and client.
FILE FORMATThe file is INI-style and consists of sections and options. A section begins with the name of the sections in square brackets and continues until the next section begins. Options are specified in the form "name=value". The file is line-based each newline-terminated line represents either a comment, a section name or an option. Any line beginning with a hash (#) is ignored, as are lines containing only whitespace.
SERVER OPTIONSThese options are only necessary on the Bcfg2 server. They are specified in the [server] section of the configuration file. repository Specifies the path to the Bcfg2 repository containing all of the configuration specifications. The repository should be created using the bcfg2-admin init com‐ mand. filemonitor The file monitor used to watch for changes in the repository. The default is the best available monitor. The following values are valid: inotify gamin pseudo fam_blocking Whether the server should block at startup until the file monitor backend has pro‐ cessed all events. This can cause a slower startup, but ensure that all files are recognized before the first client is handled. Defaults to True. ignore_files A comma-separated list of globs that should be ignored by the file monitor. Default values are: *~ *# #* *.swp *.swpx *.swx SCCS .svn 4913 .gitignore listen_all This setting tells the server to listen on all available interfaces. The default is to only listen on those interfaces specified by the bcfg2 setting in the compo‐ nents section of bcfg2.conf. plugins A comma-delimited list of enabled server plugins. Currently available plugins are: ACL Bundler Bzr Cfg Cvs Darcs Decisions Defaults Deps FileProbes Fossil Git GroupLogic GroupPatterns Guppy Hg Ldap Metadata NagiosGen Ohai Packages Pkgmgr POSIXCompat Probes Properties PuppetENC Reporting Rules SEModules ServiceCompat SSHbase Svn TemplateHelper Trigger Descriptions of each plugin can be found in their respective sections below. prefix Specifies a prefix if the Bcfg2 installation isn't placed in the default location (e.g. /usr/local). backend Specifies which server core backend to use. Current available options are: cherrypy builtin best The default is best, which is currently an alias for builtin. More details on the backends can be found in the official documentation. user The username or UID to run the daemon as. Default is 0. group The group name or GID to run the daemon as. Default is 0. vcs_root Specifies the path to the root of the VCS working copy that holds your Bcfg2 speci‐ fication, if it is different from repository. E.g., if the VCS repository does not hold the bcfg2 data at the top level, you may need to set this option. umask The umask to set for the server. Default is 0077.
SERVER PLUGINSThis section has a listing of all the plugins currently provided with Bcfg2. ACL Plugin The ACL plugin controls which hosts can make which XML-RPC calls. Bundler Plugin The Bundler plugin is used to describe groups of inter-dependent configuration entries, such as the combination of packages, configuration files, and service activations that comprise typical Unix daemons. Bundles are used to add groups of configuration entries to the inventory of client configurations, as opposed to describing particular versions of those entries. Bzr Plugin The Bzr plugin allows you to track changes to your Bcfg2 repository using a GNU Bazaar version control backend. Currently, it enables you to get revision information out of your repository for reporting purposes. Cfg Plugin The Cfg plugin provides a repository to describe configuration file contents for clients. In its simplest form, the Cfg repository is just a directory tree modeled off of the directory tree on your client machines. Cvs Plugin The Cvs plugin allows you to track changes to your Bcfg2 repository using a Concurrent version control backend. Currently, it enables you to get revision information out of your repository for reporting purposes. Darcs Plugin The Darcs plugin allows you to track changes to your Bcfg2 repository using a Darcs ver‐ sion control backend. Currently, it enables you to get revision information out of your repository for reporting purposes. Decisions Plugin The Decisions plugin has support for a centralized set of per-entry installation deci‐ sions. This approach is needed when particular changes are deemed "high risk"; this gives the ability to centrally specify these changes, but only install them on clients when administrator supervision is available. Defaults Plugin The Defaults plugin can be used to populate default attributes for entries. Defaults is not a Generator plugin, so it does not actually bind an entry; Defaults are applied after an entry has been bound, and only populate attributes that are not yet set. Deps Plugin The Deps plugin allows you to make a series of assertions like "Package X requires Package Y (and optionally also Package Z etc.)" FileProbes Plugin The FileProbes plugin allows you to probe a client for a file, which is then added to the Cfg specification. If the file changes on the client, FileProbes can either update it in the specification or allow Cfg to replace it. Fossil Plugin The Fossil plugin allows you to track changes to your Bcfg2 repository using a Fossil SCM version control backend. Currently, it enables you to get revision information out of your repository for reporting purposes. Git Plugin The Git plugin allows you to track changes to your Bcfg2 repository using a Git version control backend. Currently, it enables you to get revision information out of your reposi‐ tory for reporting purposes. GroupLogic Plugin The GroupLogic plugin lets you flexibly assign group membership with a Genshi template. GroupPatterns Plugin The GroupPatterns plugin is a connector that can assign clients group membership based on patterns in client hostnames. Guppy Plugin The Guppy plugin is used to trace memory leaks within the bcfg2-server process using Guppy. Hg Plugin The Hg plugin allows you to track changes to your Bcfg2 repository using a Mercurial ver‐ sion control backend. Currently, it enables you to get revision information out of your repository for reporting purposes. Ldap Plugin The Ldap plugin makes it possible to fetch data from a LDAP directory, process it and attach it to your metadata. Metadata Plugin The Metadata plugin is the primary method of specifying Bcfg2 server metadata. NagiosGen Plugin The NagiosGen plugin dynamically generates Nagios configuration files based on Bcfg2 data. Ohai Plugin The Ohai plugin is used to detect information about the client operating system. The data is reported back to the server using JSON. Packages Plugin The Packages plugin is an alternative to Pkgmgr for specifying package entries for clients. Where Pkgmgr explicitly specifies package entry information, Packages delegates control of package version information to the underlying package manager, installing the latest version available from through those channels. Pkgmgr Plugin The Pkgmgr plugin resolves the Abstract Configuration Entity "Package" to a package speci‐ fication that the client can use to detect, verify and install the specified package. POSIXCompat Plugin The POSIXCompat plugin provides a compatibility layer for 1.3 POSIX Entries so that they are compatible with older clients. Probes Plugin The Probes plugin gives you the ability to gather information from a client machine before you generate its configuration. This information can be used with the various templating systems to generate configuration based on the results. Properties Plugin The Properties plugin is a connector plugin that adds information from properties files into client metadata instances. PuppetENC Plugin The PuppetENC plugin is a connector plugin that adds support for Puppet External Node Classifiers. Reporting Plugin The Reporting plugin enables the collection of data for use with Bcfg2's dynamic reporting system. Rules Plugin The Rules plugin provides literal configuration entries that resolve the abstract configu‐ ration entries normally found in Bundler. The literal entries in Rules are suitable for consumption by the appropriate client drivers. SEModules Plugin The SEModules plugin provides a way to distribute SELinux modules via Bcfg2. ServiceCompat Plugin The ServiceCompat plugin converts service entries for older clients. SSHbase Plugin The SSHbase generator plugin manages ssh host keys (both v1 and v2) for hosts. It also manages the ssh_known_hosts file. It can integrate host keys from other management domains and similarly export its keys. Svn Plugin The Svn plugin allows you to track changes to your Bcfg2 repository using a Subversion backend. Currently, it enables you to get revision information out of your repository for reporting purposes. Trigger Plugin The Trigger plugin provides a method for calling external scripts when clients are config‐ ured.
CACHING OPTIONSThese options are specified in the [caching] section. client_metadata The following four caching modes are available for client metadata: · off: No caching of client metadata objects is performed. This is the default. · initial: Only initial metadata objects are cached. Initial metadata objects are created only from the data in the Metadata plugin, before additional groups from other plugins are merged in. · cautious: Final metadata objects are cached, but each client’s cache is cleared at the start of each client run, immediately after probe data is received. Cache is also cleared as in aggressive mode. on is a synonym for cautious. · aggressive: Final metadata objects are cached. Each plugin is responsible for clearing cache when appropriate.
CLIENT OPTIONSThese options only affect client functionality. They can be specified in the [client] sec‐ tion. decision Specify the server decision list mode (whitelist or blacklist). (This settiing will be ignored if the client is called with the -f option). drivers Specify tool driver set to use. This option can be used to explicitly specify the client tool drivers you want to use when the client is run. paranoid Run the client in paranoid mode. profile Assert the given profile for the host.
COMMUNICATION OPTIONSSpecified in the [communication] section. These options define settings used for client-server communication. ca The path to a file containing the CA certificate. This file is required on the server, and optional on clients. However, if the cacert is not present on clients, the server cannot be verified. certificate The path to a file containing a PEM formatted certificate which signs the key with the ca certificate. This setting is required on the server in all cases, and required on clients if using client certificates. key Specifies the path to a file containing the SSL Key. This is required on the server in all cases, and required on clients if using client certificates. password Required on both the server and clients. On the server, sets the password clients need to use to communicate. On a client, sets the password to use to connect to the server. protocol Communication protocol to use. Defaults to xmlrpc/tlsv1. retries A client-only option. Number of times to retry network communication. Default is 3 retries. retry_delay A client-only option. Number of seconds to wait in between retrying network com‐ munication. Default is 1 second. serverCommonNames A client-only option. A colon-separated list of Common Names the client will accept in the SSL certificate presented by the server. timeout A client-only option. The network communication timeout. user A client-only option. The UUID of the client.
COMPONENT OPTIONSSpecified in the [components] section. bcfg2 URL of the server. On the server this specifies which interface and port the server listens on. On the client, this specifies where the client will attempt to contact the server. e.g. bcfg2 = https://10.3.1.6:6789 encoding Text encoding of configuration files. Defaults to UTF-8. lockfile The path to the client lock file, which is used to ensure that only one Bcfg2 client runs at a time on a single client.
LOGGING OPTIONSSpecified in the [logging] section. These options control the server logging functional‐ ity. debug Whether or not to enable debug-level log output. Default is false. path Server log file path. syslog Whether or not to send logging data to syslog. Default is true. verbose Whether or not to enable verbose log output. Default is false.
MDATA OPTIONSSpecified in the [mdata] section. These options affect the default metadata settings for Paths with type='file'. owner Global owner for Paths (defaults to root) group Global group for Paths (defaults to root) mode Global permissions for Paths (defaults to 644) secontext Global SELinux context for Path entries (defaults to __default__, which restores the expected context) paranoid Global paranoid settings for Paths (defaults to false) sensitive Global sensitive settings for Paths (defaults to false) important Global important settings for Paths. Defaults to false.
PACKAGES OPTIONSThe following options are specified in the [packages] section. backends Comma separated list of backends for the dependency resolution. Default is "Yum,Apt,Pac,Pkgng". resolver Enable dependency resolution. Default is 1 (true). metadata Enable metadata processing. Default is 1 (true). If metadata is disabled, it’s implied that resolver is also disabled. yum_config The path at which to generate Yum configs. No default. apt_config The path at which to generate APT configs. No default. gpg_keypath The path on the client where RPM GPG keys will be copied before they are imported on the client. Default is /etc/pki/rpm-gpg. version Set the version attribute used when binding Packages. Default is auto. The following options are specified in the [packages:yum] section. use_yum_libraries By default, Bcfg2 uses an internal implementation of Yum’s dependency resolution and other routines so that the Bcfg2 server can be run on a host that does not support Yum itself. If you run the Bcfg2 server on a machine that does have Yum libraries, however, you can enable use of those native libraries in Bcfg2 by setting this to 1. helper Path to bcfg2-yum-helper. By default, Bcfg2 looks first in $PATH and then in /usr/sbin/bcfg2-yum-helper for the helper. The following options are specified in the [packages:pulp] section. username The username of a Pulp user that will be used to register new clients and bind them to repositories. password The password of a Pulp user that will be used to register new clients and bind them to repositories. All other options in the [packages:yum] section will be passed along verbatim to the Yum configuration if you are using the native Yum library support.
PARANOID OPTIONSThese options allow for finer-grained control of the paranoid mode on the Bcfg2 client. They are specified in the [paranoid] section of the configuration file. path Custom path for backups created in paranoid mode. The default is in /var/cache/bcfg2. max_copies Specify a maximum number of copies for the server to keep when running in para‐ noid mode. Only the most recent versions of these copies will be kept.
SSL CA OPTIONSThese options are necessary to configure the SSL CA feature of the Cfg plugin and can be found in the [sslca_default] section of the configuration file. config Specifies the location of the openssl configuration file for your CA. passphrase Specifies the passphrase for the CA’s private key (if necessary). If no passphrase exists, it is assumed that the private key is stored unencrypted. chaincert Specifies the location of your ssl chaining certificate. This is used when pre-existing certifcate hostfiles are found, so that they can be validated and only regenerated if they no longer meet the specification. If you’re using a self signing CA this would be the CA cert that you generated.
DATABASE OPTIONSServer-only, specified in the [database] section. These options control the database con‐ nection of the server. engine The database engine used by server plugins. One of the following: postgresql mysql sqlite3 ado_mssql name The name of the database to use for server data. If 'database_engine' is set to 'sqlite3' this is a file path to the sqlite file and defaults to $REPOSI‐ TORY_DIR/etc/bcfg2.sqlite. user User for database connections. Not used for sqlite3. password Password for database connections. Not used for sqlite3. host Host for database connections. Not used for sqlite3. port Port for database connections. Not used for sqlite3. options Various options for the database connection. The value expected is the literal value of the django OPTIONS setting. reporting_engine The database engine used by the Reporting plugin. One of the following: postgresql mysql sqlite3 ado_mssql If reporting_engine is not specified, the Reporting plugin uses the same database as the other server plugins. reporting_name The name of the database to use for reporting data. If 'database_engine' is set to 'sqlite3' this is a file path to the sqlite file and defaults to $REPOSI‐ TORY_DIR/etc/reporting.sqlite. reporting_user User for reporting database connections. Not used for sqlite3. reporting_password Password for reporting database connections. Not used for sqlite3. reporting_host Host for reporting database connections. Not used for sqlite3. reporting_port Port for reporting database connections. Not used for sqlite3. reporting_options Various options for the reporting database connection. The value expected is the literal value of the django OPTIONS setting.
REPORTING OPTIONSconfig Specifies the location of the reporting configuration (default is /etc/bcfg2-web.conf. time_zone Specifies a time zone other than that used on the system. (Note that this will cause the Bcfg2 server to log messages in this time zone as well). web_debug Turn on Django debugging. max_children Maximum number of children for the reporting collector. Use 0 to disable the limit. (default is 0) django_settings Arbitrary options for the Django installation. The value expected is a literal python dictionary, that is merged with the already set django settings.
SEE ALSObcfg2(1), bcfg2-server(8)
|This manual||Reference||Other manuals|
|bcfg2.conf(5)||referred by||bcfg2-lint.conf(5) | bcfg2-server(8)|
|refer to||bcfg2(1) | bcfg2-server(8)|