BELKIN(8) - Linux man page online | Administration and privileged commands
Driver for Belkin serial UPS equipment.
BELKIN(8) NUT Manual BELKIN(8)
Network UPS Tools 2.7.3. 12/29/2015 BELKIN(8)
NAMEbelkin - Driver for Belkin serial UPS equipment
NOTEThis man page only documents the hardware-specific features of the belkin driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWAREThe belkin driver is known to support the Regulator Pro 525 (F6C525-SER). Other similar models such as the 425 and 625 should also work. The Trust UPS and older Belkin units are not supported.
EXTRA ARGUMENTSThis driver does not support any extra settings in the ups.conf(5).
BUGSThere are dragons lurking within the protocol to this UPS. I have one that essentially behaves like a glorified power strip due to some invasive probing on my part. Don’t mess with it directly. Note the driver doesn’t go anywhere near these character sequences, so it won’t zap your UPS. I only mention this here as yet another reminder of the perils of closed hardware.
SEE ALSOThe core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|This manual||Reference||Other manuals|
|belkin(8)||referred by||belkinunv(8) | nutupsdrv(8) | upsd(8)|
|refer to||nutupsdrv(8) | ups.conf(5)|