SIMPLE SOLUTIONS

BOOTCD(1) - Linux man page online | User commands

Utils to run diskless systems from cd.

Chapter
Wed Feb 23 00:00:00 EET 2000
BOOTCD(1) bootcd utils BOOTCD(1)

NAME

bootcd* - utils to run diskless systems from cd

DESCRIPTION

With bootcd you can copy your running Debian System on CD with the command bootcdwrite. If your system has no CD-Writer you can build a bootcd via NFS on a remote System with CD- Writer or you can only create an ISO image. When you run your system from CD you do not need any disks. All changes will be done in ram. To reuse this changes at next boot time you can save them on FLOPPY with the command bootcdflopcp. If booting from your CD-drive is not supported, booting from FLOPPY is possible. It is possible to install a new system from the running CD with the command bootcd2disk. Bootcd2disk can also find a target disk, format it and make it bootable automatically. bootcd is now easier to install (only one package). The sandard system runs on i386 or amd64. Like all Debian standard Kernels a initrd is used by bootcd as default now.

SEE ALSO

bootcd2disk(1), bootcdflopcp(1), bootcdwrite(1), bootcdbackup(1), bootcdbackup.conf(5)

AUTHOR

This manual page was written by Bernd Schumacher <@hpe.com>, for the Debian GNU/Linux system (but may be used by others).
Wed Feb 23 00:00:00 EET 2000 BOOTCD(1)
This manual Reference Other manuals
bootcd(1) referred by bootcd2disk(1) | bootcd2disk.conf(5) | bootcdbackup(1) | bootcdbackup.conf(5) | bootcdflopcp(1) | bootcdwrite(1) | bootcdwrite.conf(5)
refer to bootcd2disk(1) | bootcdbackup(1) | bootcdbackup.conf(5) | bootcdflopcp(1) | bootcdwrite(1)
Download raw manual
Main page bootcd utils (+8) № 1 (+39907)
Go top