pragmatism first

BPQPARMS(8) - Linux manual page online | Administration and privileged commands

Configure BPQ ethernet devices.

4 September 1996
BPQPARMS(8) Linux System Managers Manual BPQPARMS(8)


bpqparms - Configure BPQ ethernet devices.


bpqparms device [-a ethaddr] [-d ethaddr] [-vV]


Bpqparms allows the setting of the BPQ Ethernet options for a particular device. Each BPQ Ethernet device appears as a device named bpq0...bpqN which overlays the original Ethernet device, usually eth0...ethN. This device is an AX.25 device driver and allows AX.25 frames to be transmitted over an Ethernet to another machine using the same protocol. The default for the device is to send and receive BPQ Ethernet packets to the broadcast address. This program replaces the previous “axparms -dev” option.


-a ethaddr Allows the setting of which ethernet address will be accepted by the BPQ Ethernet device. -d ethaddr If specified on its own, will set the destination ethernet address will be used for transmitting and for receiving of BPQ ethernet packets. An address of “broadcast” sets it to the ethernet broadcast address. -v Displays the version number. -V The original version messages.


ax25(4), axports(5), ifconfig(8).


Joerg Reuter DL1BKE <>
Linux 4 September 1996 BPQPARMS(8)
This manual Reference Other manuals
bpqparms(8) referred by
refer to ax25(4) | axports(5) | ifconfig(8)
Download raw manual
Index Linux System Managers Manual (+25) Linux (+1529) № 8 (+5755)
Go top