SIMPLE SOLUTIONS

CAPIINIT(8) - Linux man page online | Administration and privileged commands

Start or stop CAPI-capable ISDN cards.

Chapter
capiinit(8) System Manager's Manual capiinit(8)

NAME

capiinit - start or stop CAPI-capable ISDN cards

SYNOPSIS

capiinit [OPTIONS] start | stop | show | status | prepare | reload | activate | deactivate capiinit [OPTIONS] activate|deactivate cardname capiinit [OPTIONS] activate|deactivate driver [cardname]

DESCRIPTION

capiinit is called with one of the following actions: start Load all modules and initialize all cards (loading the firmware), which are config‐ ured in /etc/capi.conf. stop Reset all cards and unload modules. show Show the current configuration. status Show the current status. prepare Load all modules. activate Initialize all cards. activate cardname Initialize one card (i.e.: c4-ec00). activate driver [cardnumber] Initialize one card. deactivate Reset all cards. deactivate cardname Reset one card (i.e.: c4-ec00). deactivate driver [cardnumber] Reset one card. reload Reset all cards and initialize them again. Firmware files are searched in this order in the following directories: /usr/share/isdn/`uname -r`, /usr/share/isdn, /usr/lib/isdn, /lib/isdn. There is a sample config in /etc/capi.conf.

OPTIONS

-c filename, --config filename Use filename as config file (default is /etc/capi.conf). -d, --debug Save patch values for debugging purposes. -s, --silent Don't show status information.

AUTHOR

Manpage written from C source by Paul Slootman <@debian.org>, updated by Matthias Klose <@klose.in-berlin.de>.
capiinit(8)
This manual Reference Other manuals
capiinit(8) referred by capiinfo(8) | capiplugin(8)
refer to
Download raw manual
Main page System Manager's Manual (+2060) № 8 (+5755)
Go top