SIMPLE SOLUTIONS

CHCPU - reference manual online

Configure CPUs.

Chapter
July 2014
CHCPU(8)                              System Administration                              CHCPU(8)

NAME chcpu - configure CPUs
SYNOPSIS chcpu -c|-d|-e|-g cpu-list chcpu -p mode chcpu -r|-h|-V
DESCRIPTION chcpu can modify the state of CPUs. It can enable or disable CPUs, scan for new CPUs, change the CPU dispatching mode of the underlying hypervisor, and request CPUs from the hypervisor (configure) or return CPUs to the hypervisor (deconfigure). Some options have a cpu-list argument. Use this argument to specify a comma-separated list of CPUs. The list can contain individual CPU addresses or ranges of addresses. For example, 0,5,7,9-11 makes the command applicable to the CPUs with the addresses 0, 5, 7, 9, 10, and 11.
OPTIONS -c, --configure cpu-list Configure the specified CPUs. Configuring a CPU means that the hypervisor takes a CPU from the CPU pool and assigns it to the virtual hardware on which your kernel runs. -d, --disable cpu-list Disable the specified CPUs. Disabling a CPU means that the kernel sets it offline. -e, --enable cpu-list Enable the specified CPUs. Enabling a CPU means that the kernel sets it online. A CPU must be configured, see -c, before it can be enabled. -g, --deconfigure cpu-list Deconfigure the specified CPUs. Deconfiguring a CPU means that the hypervisor removes the CPU from the virtual hardware on which the Linux instance runs and returns it to the CPU pool. A CPU must be offline, see -d, before it can be decon‐ figured. -p, --dispatch mode Set the CPU dispatching mode (polarization). This option has an effect only if your hardware architecture and hypervisor support CPU polarization. Available modes are: horizontal The workload is spread across all available CPUs. vertical The workload is concentrated on few CPUs. -r, --rescan Trigger a rescan of CPUs. After a rescan, the Linux kernel recognizes the new CPUs. Use this option on systems that do not automatically detect newly attached CPUs. -V, --version Display version information and exit. -h, --help Display help text and exit.
RETURN CODES chcpu has the following return codes: 0 success 1 failure 64 partial success
AUTHOR Heiko Carstens ⟨@de.ibm.com⟩
SEE ALSO lscpu(1)
AVAILABILITY The chcpu command is part of the util-linux package and is available from Linux Kernel Archive ⟨ftp://ftp.kernel.org/pub/linux/utils/util-linux/⟩.
util-linux July 2014 CHCPU(8)
This manual Reference Other manuals
chcpu(8) referred by lscpu(1)
refer to lscpu(1)