SIMPLE SOLUTIONS

CHECKRAD(5) - Linux man page online | File formats

Chapter
13 January 2006
CHECKRAD(5) File Formats Manual CHECKRAD(5)

NAME

checkrad -- See if a user is (still) logged in on a certain port.

SYNOPSIS

checkrad [-d] nas-type nas-ip nas-port login session-id

DESCRIPTION

Checkrad is used by the radius server to check if its idea of a user logged in on a cer‐ tain port/NAS is correct if a double login is detected. Returns: 0 = no duplicate, 1 = duplicate, >1 = error.

OPTIONS

-d Enable printing of debugging information. nas-type Type of port/NAS. Can be one of: · ascend · bay · cisco · cisco_l2tp · computone · cvx · digitro · dot1x · livingston · max40xx · mikrotik · mikrotik_snmp · multitech · netserver · other · pathras · patton · portslave · pr3000 · pr4000 · redback · tc · usrhiper · versanet The "other" type cause checkrad to skip any check and always returns 1. nas-ip IP address of the NAS to check. nas-port The NAS port to check (may be ignored by some nas-type). login The login name to check. session-id Session to check. (actually ignored by all nas-type)

SEE ALSO

radiusd(8)

AUTHOR

Written by Miquel van Smoorenburg, @cistron.nl. This manual page was written by Marco Nenciarini <@debian.org> for the Debian project (but may be used by others).
13 January 2006 CHECKRAD(5)
This manual Reference Other manuals
checkrad(5) referred by
refer to radiusd(8)
Download raw manual
Main page File Formats Manual (+542) № 5 (+2141)
Go top