CHOCOLATE-STRIFE(6) - Linux man page online | Games

Historically compatible strife engine.

chocolate-strife(6) Games Manual chocolate-strife(6)


chocolate-strife - historically compatible strife engine


chocolate-strife [OPTIONS]


Chocolate Strife is an accurate and complete recreation of Rogue Entertainment's "Strife: Quest for the Sigil". It was created through more than two years of reverse engineering effort with the blessings of the original programmers of the game (see the section HISTORY below).


-cdrom [windows only] Save configuration data and savegames in c:\, allowing play from CD. -config <file> Load main configuration from the specified file, instead of the default. -devparm Developer mode. Implies -nograph. -dumpsubstconfig <filename> Read all MIDI files from loaded WAD files, dump an example substitution music con‐ fig file to the specified filename and quit. -extraconfig <file> Load additional configuration from the specified file, instead of the default. -fast Monsters move faster. -file <files> Load the specified PWAD files. -flip Flip player gun sprites (broken). -iwad <file> Specify an IWAD file to use. -loadgame <s> Load the game in slot s. -mb <mb> Specify the heap size, in MiB (default 16). -mmap Use the OS's virtual memory subsystem to map WAD files directly into memory. -nograph Disable graphical introduction sequence -nomonsters Disable monsters. -nomusic Disable music. -nosfx Disable sound effects. -nosound Disable all sound output. -novoice Disable voice dialog and show dialog as text instead, even if voices.wad can be found. -random Items respawn at random locations -respawn Respawn monsters after they are killed. -savedir <directory> Specify a path from which to load and save games. If the directory does not exist then it will automatically be created. -skill <skill> Set the game skill, 1-5 (1: easiest, 5: hardest). A skill of 0 disables all mon‐ sters. -turbo <x> Turbo mode. The player's speed is multiplied by x%. If unspecified, x defaults to 200. Values are rounded up to 10 and down to 400. -warp x Start a game immediately, warping to level x. -work Set Rogue playtesting mode (godmode, noclip toggled by backspace)


-donut <x> <y> Use the specified magic values when emulating behavior caused by memory overruns from improperly constructed donuts. In Vanilla Strife this can differ depending on the operating system. The default (if this option is not specified) is to emulate the behavior when running under Windows 98. -gameversion <version> Emulate a specific version of Strife. Valid values are "1.2" and "1.31". -setmem <version> Specify DOS version to emulate for NULL pointer dereference emulation. Supported versions are: dos622, dos71, dosbox. The default is to emulate DOS 7.1 (Windows 98). -spechit <n> Use the specified magic value when emulating spechit overruns.


-maxdemo <size> Specify the demo buffer size (KiB) -playdemo <demo> Play back the demo named demo.lmp. -record <x> Record a demo named x.lmp. -solo-net Play back a demo recorded in a netgame with a single player. -strictdemos When recording or playing back demos, disable any extensions of the vanilla demo format - record demos as vanilla would do, and play back demos as vanilla would do. -timedemo <demo> Play back the demo named demo.lmp, determining the framerate of the screen.


-1 Don't scale up the screen. Implies -window. -2 Double up the screen to 2x its normal size. Implies -window. -3 Double up the screen to 3x its normal size. Implies -window. -fullscreen Run in fullscreen mode. -geometry <WxY> Specify the dimensions of the window. Implies -window. -height <y> Specify the screen height, in pixels. Implies -window. -noblit Disable blitting the screen. -nodraw Disable rendering the screen entirely. -nograbmouse Don't grab the mouse when running in windowed mode. -nomouse Disable the mouse. -width <x> Specify the screen width, in pixels. Implies -window. -window Run in a window.


-altdeath Start a deathmatch game. Weapons do not stay in place and all items respawn after 30 seconds. -autojoin Automatically search the local LAN for a multiplayer server and join it. -avg Austin Virtual Gaming: end levels after 20 minutes. -connect <address> Connect to a multiplayer server running on the given address. -dedicated Start a dedicated server, routing packets but not participating in the game itself. -dup <n> Reduce the resolution of the game by a factor of n, reducing the amount of network bandwidth needed. -extratics <n> Send n extra tics in every packet as insurance against dropped packets. -left Run as the left screen in three screen mode. -localsearch Search the local LAN for running servers. -newsync Use new network client sync code rather than the classic sync code. This is cur‐ rently disabled by default because it has some bugs. -nodes <n> Autostart the netgame when n nodes (clients) have joined the server. -port <n> Use the specified UDP port for communications, instead of the default (2342). -privateserver When running a server, don't register with the global master server. Implies -server. -query <address> Query the status of the server running on the given IP address. -right Run as the right screen in three screen mode. -search Query the Internet master server for a global list of active servers. -server Start a multiplayer server, listening for connections. -servername <name> When starting a network server, specify a name for the server. -solo-net Start the game playing as though in a netgame with a single player. This can also be used to play back single player netgame demos. -timer <n> For multiplayer games: exit each level after n minutes.


-aa <files> Equivalent to "-af <files> -as <files>". -af <files> Simulates the behavior of NWT's -af option, merging flats into the main IWAD direc‐ tory. Multiple files may be specified. -as <files> Simulates the behavior of NWT's -as option, merging sprites into the main IWAD directory. Multiple files may be specified. -deh <files> Load the given dehacked patch(es) -merge <files> Simulates the behavior of deutex's -merge option, merging a PWAD into the main IWAD. Multiple files may be specified. -nocheats Ignore cheats in dehacked files. -nwtmerge <files> Simulates the behavior of NWT's -merge option. Multiple files may be specified.


To play, an IWAD file is needed. This is a large file containing all of the levels, graph‐ ics, sound effects, music and other material that make up the game. IWAD files are named according to the game; the standard names are: doom.wad, doom1.wad, doom2.wad, tnt.wad, plutonia.wad Doom, Doom II, Final Doom heretic.wad, heretic1.wad, hexen.wad, strife1.wad Heretic, Hexen and Strife (commercial Doom engine games). hacx.wad, chex.wad Hacx and Chex Quest - more obscure games based on the Doom engine. freedm.wad, freedoom1.wad, freedoom2.wad The Freedoom open content IWAD files. The following directory paths are searched in order to find an IWAD: Current working directory Any IWAD files found in the current working directory will be used in preference to IWADs found in any other directories. DOOMWADDIR This environment variable can be set to contain a path to a single directory in which to look for IWAD files. This environment variable is supported by most Doom source ports. DOOMWADPATH This environment variable, if set, can contain a colon-separated list of directo‐ ries in which to look for IWAD files, or alternatively full paths to specific IWAD files. $HOME/.local/share/games/doom Writeable directory in the user's home directory. The path can be overridden using the XDG_DATA_HOME environment variable (see the XDG Base Directory Specification). /usr/local/share/games/doom, /usr/share/games/doom System-wide locations that can be accessed by all users. The path /usr/share/games/doom is a standard path that is supported by most Doom source ports. These paths can be overridden using the XDG_DATA_DIRS environment variable (see the XDG Base Directory Specification). The above can be overridden on a one-time basis by using the -iwad command line parameter to provide the path to an IWAD file to use. This parameter can also be used to specify the name of a particular IWAD to use from one of the above paths. For example, '-iwad doom.wad' will search the above paths for the file doom.wad to use.


This section describes environment variables that control Chocolate Strife's behavior. DOOMWADDIR, DOOMWADPATH See the section, IWAD SEARCH PATHS above. PCSOUND_DRIVER When running in PC speaker sound effect mode, this environment variable specifies a PC speaker driver to use for sound effect playback. Valid options are "Linux" for the Linux console mode driver, "BSD" for the NetBSD/OpenBSD PC speaker driver, and "SDL" for SDL-based emulated PC speaker playback (using the digital output). OPL_DRIVER When using OPL MIDI playback, this environment variable specifies an OPL backend driver to use. Valid options are "SDL" for an SDL-based software emulated OPL chip, "Linux" for the Linux hardware OPL driver, and "OpenBSD" for the OpenBSD/Net‐ BSD hardware OPL driver. Generally speaking, a real hardware OPL chip sounds better than software emulation; however, modern machines do not often include one. If present, it may still require extra work to set up and elevated security privileges to access.


$HOME/.local/share/chocolate-doom/strife.cfg The main configuration file for Chocolate Strife. See strife.cfg(5). $HOME/.local/share/chocolate-doom/chocolate-strife.cfg Extra configuration values that are specific to Chocolate Strife and not present in Vanilla Strife. See chocolate-strife.cfg(5).


chocolate-doom(6), chocolate-server(6), chocolate-setup(6)


The source code for Strife was lost, which means, unlike the code for all the other com‐ mercial DOOM-engine games, it cannot be released. The only access we have to the code is the binary executable file. Reverse engineering tools were employed to disassemble and decompile the executables, which were cross- referenced against the Linux DOOM and DOS Heretic sources and painstakingly combed over multiple times, instruction-by-instruction, to ensure that the resulting Chocolate-Doom-based executable is as close as possible to the original.


Reverse engineering is a protected activity so long as the original code is not used directly in the product. Due to the vast amount of information lost through the process of compilation, and the need to refactor large portions of code in order to eliminate non- portable idioms or to adapt them properly to Chocolate Doom's framework, the resulting code behaves the same, but is not the *same* code. In addition, James Monroe and John Carmack have both stated that they have no objections to the project. Because they are the original authors of the code, and neither Rogue nor their publisher, Velocity, Inc., exist any longer as legal entities, this is effectively legal permission.


Chocolate Strife is almost, but not entirely perfect, in recreating the behavior of Vanilla Strife. Help us by reporting any discrepancies you might notice between this exe‐ cutable and the vanilla DOS program. However, do *not* report any glitch that you can replicate in the vanilla EXE as a bug. The point of Chocolate Strife, like Chocolate Doom before it, is to be as bug-compatible with the original game as possible. Also be aware that some glitches are impossible to compatibly recreate, and wherever this is the case, Chocolate Strife has erred on the side of not crashing the program, for example by initializing pointers to NULL rather than using them without setting a value first.


Chocolate Strife is part of the Chocolate Doom project. It was reverse engineered from the DOS versions of Strife by James Haley and Samuel Villarreal. Chocolate Doom was written and maintained by Simon Howard, and is based on the LinuxDoom source code released by Id Software.
Copyright © id Software Inc. Copyright © 2005-2013 Simon Howard, James Haley, Samuel Vil‐ larreal. This is free software. You may redistribute copies of it under the terms of the GNU Gen‐ eral Public License <>. There is NO WARRANTY, to the extent permitted by law.
This manual Reference Other manuals
chocolate-strife(6) referred by
refer to chocolate-doom(6) | chocolate-server(6) | chocolate-setup(6) | chocolate-strife.cfg(5) | strife.cfg(5)
Download raw manual
Main page Games Manual (+645) № 6 (+1346)
Go top