SIMPLE SOLUTIONS

CQTEST(8) - man page online | administration and privileged commands

HylaFAX copy quality checking test program.

Chapter
OR
CQTEST(8)                            System Manager's Manual                            CQTEST(8)

NAME cqtest - HylaFAX copy quality checking test program
SYNOPSIS /usr/sbin/cqtest [ options ] input.tif
DESCRIPTION cqtest is a program for testing the copy quality checking support in the HylaFAX software (specifically, in the faxgetty(8) program). cqtest takes a TIFF/F (TIFF Class F) file and generates a new TIFF/F file that is a copy of the input file, but with any erroneous scan‐ lines replaced/regenerated. In addition, cqtest prints diagnostic messages describing its actions and indicates whether the input data has acceptable copy quality according to the copy quality checking threshold parameters. Options are provided for specifying copy quality checking threshold parameters
OPTIONS -m badlines Set the maximum consecutive bad lines of data that may appear in each acceptable page of input data. This is equivalent to the MaxConsecutiveBad‐ Lines configuration parameter; c.f. hylafax-config(5). By default cqtest accepts no more than 5 consecutive bad lines in a page. -o file Write output to file. By default output is written to the file cq.tif. -p %goodlines Set the minimum percentage of ``good lines'' of data that may appear in acceptable page of input data. A line is good if it decodes without error to a row of pixels that is the expected width. This is equivalent to the PercentGoodLines configuration parameter; c.f. hylafax-config(5). By default cqtest requires that 95% of the rows of each page be good.
EXAMPLES The following shows a multi-page, high-resolution document with a single error on each page. Each page has acceptable copy quality using the default threshold parameters. hyla% /usr/sbin/cqtest ~/tiff/pics/faxix.tif 1728 x 297, 7.7 line/mm, 1-D MH, lsb-to-msb RECV/CQ: Bad 1D pixel count, row 245, got 1616, expected 1728 RECV: 2234 total lines, 1 bad lines, 1 consecutive bad lines 1728 x 297, 7.7 line/mm, 1-D MH, lsb-to-msb RECV/CQ: Bad 1D pixel count, row 148, got 3023, expected 1728 RECV: 2234 total lines, 1 bad lines, 1 consecutive bad lines 1728 x 297, 7.7 line/mm, 1-D MH, lsb-to-msb RECV/CQ: Bad 1D pixel count, row 151, got 1722, expected 1728 RECV: 2234 total lines, 1 bad lines, 1 consecutive bad lines 1728 x 297, 7.7 line/mm, 1-D MH, lsb-to-msb RECV/CQ: Bad 1D pixel count, row 148, got 1776, expected 1728 RECV: 2234 total lines, 1 bad lines, 1 consecutive bad lines
SEE ALSO faxgetty(8), hylafax-config(5)
October 3, 1995 CQTEST(8)
This manual Reference Other manuals
cqtest(8) referred by
refer to faxgetty(8) | hylafax-config(5)