SIMPLE SOLUTIONS

# CW(7) - Linux man page online | Overview, conventions, and miscellany

The international Morse code.

Chapter
CW Tutor Package
CW(7) Miscellaneous Information Manual CW(7)

## NAME

CW - the international Morse code

## DESCRIPTION

CW is an abbreviation for "continuous wave", the commonly used technical term for Morse code communication. A basic knowledge or understanding of Morse code is a requirement for Radio Amateurs and Marine Radio Operators in many parts of the world. MORSE CODE TIMINGS In Morse code, a dot or dash is referred to as an element. The basic timing unit is the dot period. This is the time taken to send a dot, not including any space before or after the dot. The lengths of all other elements are then derived from this basic unit, using the following rules: The duration of a dash is three dots. The time between each element (dot or dash) is one dot length. The space between characters is three dot lengths. The space between words is seven dot lengths. The following formula calculates the dot period in microseconds from the Morse code speed in words per minute: dot period = ( 1200000 / speed ) This formula arises from the use of the word PARIS as a 'standard' word for calibrating Morse code speed. PARIS is 50 units long when sent in Morse code. Analysis of English plain-text indicates that the average word is 50 units, including spaces. MORSE CODE CHARACTERS The following list shows the IS0 8859-1 (Latin-1) characters that have commonly understood representations in Morse code: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789"\$()+-./:;=?_@ and space In addition, following ISO 8859-1 and ISO 8859-2 accented characters are also part of the generally accepted international Morse code: ÜÄÇÖÉÈÀÑŞ (S with cedilla), Ž (Z with caron/hacek), Finally, libcw adds the following ASCII characters as extensions to single character pro‐ cedural signals: <>!&^~ MORSE CODE CHARACTER TABLES The following table shows the Morse code equivalents for the ISO 8859-1, accented ISO 8859-1, and accented ISO 8859-2 characters above. The ASCII portion of this table is taken from the ARRL Handbook, and the accented extensions from various other sources: Ch Code Ch Code ─────────────────────────── A .- B -... C -.-. D -.. E . F ..-. G --. H .... I .. J .--- K -.- L .-.. M -- N -. O --- P .--. Q --.- R .-. S ... T - U ..- V ...- W .-- X -..- Y -.-- Z --.. 0 ----- 1 .---- 2 ..--- 3 ...-- 4 ....- 5 ..... 6 -.... 7 --... 8 ---.. 9 ----. " .-..-. ' .----. \$ ...-..- ( -.--. ) -.--.- + .-.-. , --..-- - -....- . .-.-.- / -..-. : ---... ; -.-.-. = -...- ? ..--.. _ ..--.- Ch Code Ch Code ────────────────────────────────────────────────── Ü ..-- Ä .-.- Ç -.-.. Ö ---. É ..-.. À .-..- À .--.- Ñ --.-- Ş (S+cedilla) ---- Ž (Z+caron/hacek) --..- In addition to the above standard characters, the following characters are conventionally used for punctuation and procedural signals as follows: Ch Code Ch Code ─────────────────────────── " .-..-. ' .----. \$ ...-..- ( -.--. ) -.--.- + .-.-. , --..-- - -....- . .-.-.- / -..-. : ---... ; -.-.-. = -...- ? ..--.. _ ..--.- @ .--.-. and the following are non-conventional extensions implemented by libcw: Ch Code Ch Code ─────────────────────────── < ...-.- > -...-.- ! ...-. & .-... ^ -.-.- ~ .-.-.. An alternative view of punctuation and procedural signals is as combination Morse charac‐ ters: Ch Prosig Ch Prosig ───────────────────────────── " [AF] ' [WG] \$ [SX] ( [KN] ) [KK] + [AR] , [MIM] - [DU] . [AAA] / [DN] : [OS] ; [KR] = [BT] ? [IMI] _ [IQ] @ [AC] < [VA],[SK] > [BK] ! [SN] & [AS] ^ [KA] ~ [AL]

## NOTES

Despite the fact that this manual page constantly and consistently refers to Morse code elements as dots and dashes, DO NOT think in these terms when trying to learn Morse code. Always think of them as 'dit's and 'dah's.