CYRUS-MASTER(8) - Linux man page online | Administration and privileged commands
Master Cyrus process.
CYRMASTER(8) System Manager's Manual CYRMASTER(8)
CMU Project Cyrus CYRMASTER(8)
NAMEcyrmaster - master Cyrus process
SYNOPSIScyrmaster [ -C alternate imapd.conf ] [ -M alternate cyrus.conf ] [ -l listen queue ] [ -p pidfile ] [ -P snmp agentx ping interval ] [ -j janitor period ] [ -d ] [ -D ] [ -x snmp agentx socket ]
DESCRIPTIONcyrmaster is the process that controls all of the Cyrus processes. This process is respon‐ sible for creating all imapd, pop3d, lmtpd and sieved child processes. This process also initializes the Berkeley DB code and performs scheduled cleanup/maintenance. If this process dies, then no new sessions will be started. It kills itself and all child processes when it receives a SIGTERM.
OPTIONS-C alternate imapd.conf Specifies an alternate imapd.conf for use by cyrmaster (note that this will not affect any sub-processes spawned by cyrmaster, you should specify those specifi‐ cally in the respective entries in cyrus.conf). -M alternate cyrus.conf Specifies an alternate cyrus.conf for use by cyrmaster. -l listen queue backlog Increase the listen queue backlog. By default, the listen queue is set to 32. On systems with a high connection rate, it may be desirable to increase this value. refer to listen(2) for details. -j janitor full-sweeps per second Sets the amount of times per second the janitor should sweep the entire child ta‐ ble. Leave it at the default of 1 unless you have a really high fork rate (and you have not increased the child hash table size when you compiled Cyrus from its default of 10000 entries). -p pidfile Use pidfile as the pidfile. If not specified, defaults to /run/cyrus-master.pid -P snmp agentx ping interval Sets the amount on time in seconds the subagent will try and reconnect to the mas‐ ter agent (snmpd) if it ever becomes (or starts) disconnected. Requires net-snmp 5.0 or higher. -d Start in daemon mode (run in background and disconnect from controlling terminal). -D Don't close stdin/stdout/stderr. Primarily useful for debugging. Note that -d and -D cannot be used together; consider using -L instead. -L logfile Redirect stdout and stderr to the given logfile. -x snmp agentx socket Address the master agent (most likely snmpd) listens on. Requires net-snmp 5.0 or higher.
CONFIGURATIONUpon execution, cyrmaster reads its configuration information out of the cyrus.conf(5) file. cyrmaster rereads its configuration file when it receives a hangup signal, SIGHUP. Ser‐ vices and events may be added, deleted or modified when the configuration file is reread. Any active services removed from the configuration file will be allowed to run until com‐ pletion. Services added or modified to listen on a privileged port may not be able to bind the port, depending on your system configuration. In this case a full restart is needed. Master propagates the hangup signal, SIGHUP, to its child service processes, so that they stop waiting for incoming connections and exit, allowing them to be recycled. This is useful to make services take into account a new version of the imapd.conf(5) file. Chil‐ dren that are servicing a client connection when SIGHUP is received are allowed to run until the client logouts before being recycled. It may take a long time until the client logouts, so a log message is generated for processes that have not been recycled within 30s.
NOTESThe environment variable CYRUS_VERBOSE can be set to log additional debugging information. Setting the value to 1 results in base level logging. Setting it higher results in more log messages being generated.
BUGSServices do not always go away silently when removed through a SIGHUP. If there are work‐ ers of the removed service still running, messages to syslog about broken pipes and accept() failures are to be expected. The in-memory list of services is not cleaned up ever, so a cyrmaster daemon that has been sent an extremely high amount of SIGHUP signals to add/remove/modify services will lose performance eventually. Restarting cyrmaster fixes this.
FILES/etc/cyrus.conf, /etc/imapd.conf, /run/cyrus-master.pid
SEE ALSOcyrus.conf(5), imapd.conf(5), imapd(8), pop3d(8), lmtpd(8), timsieved(8), idled(8)
|This manual||Reference||Other manuals|
|refer to||cyrus.conf(5) | imapd(8) | imapd.conf(5) | listen(2) | pop3d(8)|