FANOTIFY_INIT(2) - Linux man page online | System calls
Create and initialize fanotify group.
FANOTIFY_INIT(2) Linux Programmer's Manual FANOTIFY_INIT(2)
Linux 2017-09-15 FANOTIFY_INIT(2)
NAMEfanotify_init - create and initialize fanotify group
SYNOPSIS#include <fcntl.h> #include <sys/fanotify.h> int fanotify_init(unsigned int flags, unsigned int event_f_flags);
DESCRIPTIONFor an overview of the fanotify API, see fanotify(7). fanotify_init() initializes a new fanotify group and returns a file descriptor for the event queue associated with the group. The file descriptor is used in calls to fanotify_mark(2) to specify the files, directo‐ ries, and mounts for which fanotify events shall be created. These events are received by reading from the file descriptor. Some events are only informative, indicating that a file has been accessed. Other events can be used to determine whether another application is permitted to access a file or directory. Permission to access filesystem objects is granted by writing to the file descriptor. Multiple programs may be using the fanotify interface at the same time to monitor the same files. In the current implementation, the number of fanotify groups per user is limited to 128. This limit cannot be overridden. Calling fanotify_init() requires the CAP_SYS_ADMIN capability. This constraint might be relaxed in future versions of the API. Therefore, certain additional capability checks have been implemented as indicated below. The flags argument contains a multi-bit field defining the notification class of the lis‐ tening application and further single bit fields specifying the behavior of the file descriptor. If multiple listeners for permission events exist, the notification class is used to establish the sequence in which the listeners receive the events. Only one of the following notification classes may be specified in flags: FAN_CLASS_PRE_CONTENT This value allows the receipt of events notifying that a file has been accessed and events for permission decisions if a file may be accessed. It is intended for event listeners that need to access files before they contain their final data. This notification class might be used by hierarchical storage managers, for exam‐ ple. FAN_CLASS_CONTENT This value allows the receipt of events notifying that a file has been accessed and events for permission decisions if a file may be accessed. It is intended for event listeners that need to access files when they already contain their final content. This notification class might be used by malware detection programs, for example. FAN_CLASS_NOTIF This is the default value. It does not need to be specified. This value only allows the receipt of events notifying that a file has been accessed. Permission decisions before the file is accessed are not possible. Listeners with different notification classes will receive events in the order FAN_CLASS_PRE_CONTENT, FAN_CLASS_CONTENT, FAN_CLASS_NOTIF. The order of notification for listeners in the same notification class is undefined. The following bits can additionally be set in flags: FAN_CLOEXEC Set the close-on-exec flag (FD_CLOEXEC) on the new file descriptor. See the description of the O_CLOEXEC flag in open(2). FAN_NONBLOCK Enable the nonblocking flag (O_NONBLOCK) for the file descriptor. Reading from the file descriptor will not block. Instead, if no data is available, read(2) fails with the error EAGAIN. FAN_UNLIMITED_QUEUE Remove the limit of 16384 events for the event queue. Use of this flag requires the CAP_SYS_ADMIN capability. FAN_UNLIMITED_MARKS Remove the limit of 8192 marks. Use of this flag requires the CAP_SYS_ADMIN capa‐ bility. The event_f_flags argument defines the file status flags that will be set on the open file descriptions that are created for fanotify events. For details of these flags, see the description of the flags values in open(2). event_f_flags includes a multi-bit field for the access mode. This field can take the following values: O_RDONLY This value allows only read access. O_WRONLY This value allows only write access. O_RDWR This value allows read and write access. Additional bits can be set in event_f_flags. The most useful values are: O_LARGEFILE Enable support for files exceeding 2 GB. Failing to set this flag will result in an EOVERFLOW error when trying to open a large file which is monitored by an fan‐ otify group on a 32-bit system. O_CLOEXEC (since Linux 3.18) Enable the close-on-exec flag for the file descriptor. See the description of the O_CLOEXEC flag in open(2) for reasons why this may be useful. The following are also allowable: O_APPEND, O_DSYNC, O_NOATIME, O_NONBLOCK, and O_SYNC. Specifying any other flag in event_f_flags yields the error EINVAL (but see BUGS).
RETURN VALUEOn success, fanotify_init() returns a new file descriptor. On error, -1 is returned, and errno is set to indicate the error.
ERRORSEINVAL An invalid value was passed in flags or event_f_flags. FAN_ALL_INIT_FLAGS defines all allowable bits for flags. EMFILE The number of fanotify groups for this user exceeds 128. EMFILE The per-process limit on the number of open file descriptors has been reached. ENOMEM The allocation of memory for the notification group failed. ENOSYS This kernel does not implement fanotify_init(). The fanotify API is available only if the kernel was configured with CONFIG_FANOTIFY. EPERM The operation is not permitted because the caller lacks the CAP_SYS_ADMIN capabil‐ ity.
VERSIONSfanotify_init() was introduced in version 2.6.36 of the Linux kernel and enabled in ver‐ sion 2.6.37.
CONFORMING TOThis system call is Linux-specific.
BUGSThe following bug was present in Linux kernels before version 3.18: * The O_CLOEXEC is ignored when passed in event_f_flags. The following bug was present in Linux kernels before version 3.14: * The event_f_flags argument is not checked for invalid flags. Flags that are intended only for internal use, such as FMODE_EXEC, can be set, and will consequently be set for the file descriptors returned when reading from the fanotify file descriptor.
SEE ALSOfanotify_mark(2), fanotify(7)
COLOPHONThis page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
|This manual||Reference||Other manuals|
|fanotify_init(2)||referred by||capabilities(7) | fanotify(7) | fanotify_mark(2) | proc(5) | syscalls(2)|
|refer to||fanotify(7) | fanotify_mark(2) | open(2) | read(2)|