SIMPLE SOLUTIONS

FIREWALLD.CONF(5) - man page online | file formats

Firewalld configuration file.

Chapter
FIREWALLD.CONF(5)                         firewalld.conf                        FIREWALLD.CONF(5)

NAME firewalld.conf - firewalld configuration file
SYNOPSIS /etc/firewalld/firewalld.conf
DESCRIPTION firewalld.conf is loaded by firewalld during the initialization process. The file contains the basic configuration options for firewalld.
OPTIONS These are the options that can be set in the config file: DefaultZone This sets the default zone for connections or interfaces if the zone is not selected or specified by NetworkManager, initscripts or command line tool. The default zone is public. MinimalMark For some firewall settings several rules are needed in different tables to be able to handle packets in the correct way. To achieve that these packets are marked using the MARK target iptables(8) and ip6tables(8). With the MinimalMark option a block of marks can be reserved for private use; only marks over this value are used. The default MinimalMark value is 100. CleanupOnExit If firewalld stops, it cleans up all firewall rules. Setting this option to no or false leaves the current firewall rules untouched. The default value is yes or true. Lockdown If this option is enabled, firewall changes with the D-Bus interface will be limited to applications that are listed in the lockdown whitelist (see firewalld.lockdown- whitelist(5)). The default value is no or false. IPv6_rpfilter If this option is enabled (it is by default), reverse path filter test on a packet for IPv6 is performed. If a reply to the packet would be sent via the same interface that the packet arrived on, the packet will match and be accepted, otherwise dropped. For IPv4 the rp_filter is controlled using sysctl. IndividualCalls If this option is disabled (it is by default), combined -restore calls are used and not individual calls to apply changes to the firewall. The use of individiual calls increases the time that is needed to apply changes and to start the daemon, but is good for debugging as error messages are more specific. LogDenied Add logging rules right before reject and drop rules in the INPUT, FORWARD and OUTPUT chains for the default rules and also final reject and drop rules in zones for the configured link-layer packet type. The possible values are: all, unicast, broadcast, multicast and off. The default setting is off, which disables the logging.
SEE ALSO firewall-applet(1), firewalld(1), firewall-cmd(1), firewall-config(1), firewalld.conf(5), firewalld.direct(5), firewalld.icmptype(5), firewalld.lockdown-whitelist(5), firewall- offline-cmd(1), firewalld.richlanguage(5), firewalld.service(5), firewalld.zone(5), firewalld.zones(5)
NOTES firewalld home page: http://www.firewalld.org More documentation with examples: http://fedoraproject.org/wiki/FirewallD
AUTHORS Thomas Woerner <@redhat.com> Developer Jiri Popelka <@redhat.com> Developer
firewalld 0.4.0 FIREWALLD.CONF(5)
This manual Reference Other manuals
firewalld.conf(5) referred by firewall-applet(1) | firewall-cmd(1) | firewall-config(1) | firewall-offline-cmd(1) | firewalld(1) | firewalld.dbus(5) | firewalld.direct(5) | firewalld.icmptype(5) | firewalld.ipset(5) | firewalld.lockdown-whitelist(5) | firewalld.richlanguage(5) | firewalld.service(5) | firewalld.zone(5) | firewalld.zones(5)
refer to firewall-applet(1) | firewall-cmd(1) | firewall-config(1) | firewalld(1) | firewalld.direct(5) | firewalld.icmptype(5) | firewalld.lockdown-whitelist(5) | firewalld.richlanguage(5) | firewalld.service(5) | firewalld.zone(5) | firewalld.zones(5) | iptables(8)