SIMPLE SOLUTIONS

FS2_OPEN(6) - man page online | games

Manual page for FreeSpace 2 Open.

Chapter
December 2012
FREESPACE(6)                                                                         FREESPACE(6)

NAME fs2_open - manual page for FreeSpace 2 Open
SYNOPSIS fs2_open
DESCRIPTION FreeSpace 2 Open Website: http://scp.indiegames.us Mantis (bug reporting): http://scp.ind‐ iegames.us/mantis/
OPTIONS Usage: fs2_open [options] Graphic: -spec Enable specular Only polygons mapped with textures for which a shinemap exists will receive specu‐ lar mapping; no attempt is made to generate spec maps where they do not exist. Specular maps are specified with the base map name plus "-shine" (i.e. TCov3A- shine.pcx). FS2 Open, 3.6.15: This feature is on by default, use launcher option Disable Specu‐ lar or if necessary to manually disable enter the flag -nospec -glow Enable glow maps Only polygons mapped with textures for which a glowmap exists will be glowmapped. Glow maps are specified with the base map name plus "-glow" (i.e. TCov4A-glow.pcx) FS2 Open, 3.6.15: This feature is on by default, use launcher option Disable Glow Maps or if necessary to manually disable enter the flag -noglow -env Enable environment maps It only works if -spec is also set. Environment mapping intensity will be deter‐ mined from the shine map too (see Texturing for more info). See Video setup. FS2 Open, 3.6.15: This feature is on by default, use launcher option Disable Envi‐ ronment Maps or if necessary to manually disable enter the flag -noenv -mipmap Enable mipmapping Causes for non-mipmapped textures to have mipmaps generated within the GPU on cer‐ tain kind of texture formats, (IIRC, DDS formatted textures with a power of 2 size in both width and height). Since the use of already mipmapped DDS textures has become common, it has become deprecated. The quality of the generated mipmaps depends on each GPU and used driver. It is normally used with -img2dds flag. -nomotiondebris Disable motion debris -noscalevid Disable scale-to-window for movies Disables fullscreen scaling of video clips. -missile_lighting Apply lighting to missiles -normal Enable normal maps Normal maps require GLSL rendering, (see OpenGL Shaders (GLSL) for further info). It needs auxiliary normal maps (the same name of the base map plus "-normal"). DXT5_NM DDS format is needed. (Technical note: DXT5 will work, since only the GREEN and ALPHA channels are read by the current shader system. One direction of lines goes into the GREEN channel, the other direction goes into the ALPHA channel. RED and BLUE can be either base gray (#808080) or black. Usual practice is after creat‐ ing the DXT5_NM, copy the RED channel to the ALPHA channel, black out the RED and BLUE an then save as either a DXT5 or u8888 (uncompressed) DDS file.) FS2 Open, 3.6.15: This feature is on by default, use launcher option Disable Normal Maps or if necessary to manually disable enter the flag -nonormal -3dshockwave Enable 3D shockwaves This only has any effect when both a 2d and 3d shockwave effect are present, other‐ wise the only available effect is used. -post_process Enable post processing enables the use (if present) of post-processing effects as defined by the post_process.tbl. Bloom usage has an additional cmdline option for setting it's value, most post processing effects are achieved in mission per the mission designer or can be enabled globally in the table. -soft_particles Enable soft particles -fxaa Enable FXAA anti-aliasing Enables the FXAA postprocessing stage. Needs optional FXAA shaders, which can be found here: http://www.hard-light.net/forums/index.php?topic=76145.0 Game Speed: -img2dds Compress non-compressed images Converts all images to DDS (compressed) format. Decreases memory usage but poten‐ tially reduces image quality. -no_vsync Disable vertical sync -cache_bitmaps Cache bitmaps between missions Will ideally reduce the load-time from one mission to another. HUD: -dualscanlines Add another pair of scanning lines Adds a second pair of scanning lines to the target window when scanning an object. -targetinfo Enable info next to target Displays target info, such as name and class, beside the targeted object. -orbradar Enable 3D radar An Orb style 3D radar will replace the standard 2D version. -rearm_timer Enable rearm/repair completion timer Displays time remaining until rearm and repair from a support ship is complete. -ballistic_gauge Enable analog ballistic ammo gauge Adds an ammo gauge to the HUD when armed with a ballistic weapon. Gameplay: -mod Specifies in which folders inside FreeSpace 2 directory, the game looks for all the game data (models, missions, textures, tables, ...). Retail version only looks inside Freespace2/data/ structure and Freespace2/vp archives. This flag allows installing several different mods that modify retail behavior, and switching between them without needing to erase files or having undesired cross effects. Each mod should be installed in its own folder. It takes one argument string: the chain of names of the used directories. Comma (,) must be used as separator. In this way, -mod dir1,dir2,dir3,...,dirx causes the game to use the following directory precedence: Freespace2/dir1/ Freespace2/dir2/ Freespace2/dir3/ ... (the rest of the typed directories) ... Freespace2/dirx/ Freespace2/ This flag can be indirectly set, (and it is normally set), through Launcher MOD tab and mod.ini file. Within the Launcher's MOD tab you can select one directory, (let's call it moddir), so the flag is at least set to -mod moddir. If Freespace2/moddir/mod.ini exists it will be used to modify the -mod flag, too. -ship_choice_3d Use 3D models for ship selection Uses ship models in ship selection window. It completely disables the standard ANI interface in this screen. Some mods need a compulsory use of this flag because they don't have available animations for their ships. In this situation, and if it is not used, the game will probably crash to desktop in the ship selection window. -weapon_choice_3d Use 3D models for weapon selection Uses weapon models in weapon loadout window for secondary weapons (missiles and bombs). It completely disables the standard ANI interface in this screen. Some mods need a compulsory use of this flag because they don't have available animations for their secondary weapons. In this situation, and if it is not used, the game will probably crash to desktop in the weapon loadout window. -3dwarp Enable 3D warp Use full geometry for the subspace warp effect. -warp_flash Enable flash upon warp Enable a flash at warp in and warp out. -no_ap_interrupt Disable interrupting autopilot Tells the game to not allow players to interrupt an autopilot already-in-progress. Audio: -snd_preload Preload mission game sounds Useful in preventing game stuttering when sounds are played for the first time. -nosound Disable all sound -nomusic Disable music Multiplayer: -standalone Run as standalone server Creates a standalone multi-player server. -startgame Skip mainhall and start hosting Once you launch and choose a pilot within the game, you will immediately have begun to host a game. This can be used in conjunction with several options to customize the game you create: -closed, -restricted, -password, -gamename, -allowabove, and -allowbelow. -startgame has no effect when -standalone is used. See related: -closed -restricted -password -gamename -allowabove -allowbelow -closed Start hosted server as closed Hosts a new game in a closed state, where no one can join until the in-game "Close" button is cleared. This only works when used in conjunction with -startgame. Cannot be used in conjunction with -restricted or -password. See related: -startgame -restricted -password -restricted Host confirms join requests Hosts a new game in a restricted state. The host is presented with option to accept or deny each client's request to join the game. This only works when used in con‐ junction with -startgame. Cannot be used in conjunction with -closed or -password. See related: -startgame -closed -password -multilog Creates a log file with a summary of packets sent and received in multiplayer games. The file is saved as atalti.log within the active mod folder—or with main data folder if no mod is active. -clientdamage This feature is not available in current builds. -mpnoreturn Disable flight deck option Disables return to the flight deck screen after a mission completes. Troubleshooting: -nohtl Software mode (very slow) Reverts to software rendering mode. Warning: Enabling this will significantly reduce performance. -no_set_gamma Disable setting of gamma Disables the gamma settings in the options screen. -nomovies Disable video playback Disables all video playback. -noparseerrors Disable parsing errors Disables some parsing warnings and makes other parse errors non-fatal. Do not rely on this when creating new tables. The errors are there for a reason. -query_speech Check if this build has speech Determines if the current build includes text-to-speech. -novbo Disable OpenGL VBO -noibx Don't use cached index buffers (IBX) Disables IBX caching of model geometry data. This will dramatically increase load times, but will help troubleshoot a model if one is working incorrectly. -loadallweps Load all weapons, even those not used -disable_fbo Disable OpenGL RenderTargets -no_glsl Disable GLSL (shader) support Disables the use of GLSL rendering (OpenGL shaders). The game will revert to legacy fixed render pipeline. Please note that Normal and Height map effects will be unavailable. -ati_swap Fix colour issues on some ATI cards -no_3d_sound Use only 2D/stereo for sound effects -disable_glsl_model Don't use shaders for model rendering -use_gldrawelements Don't use glDrawRangeElements Experimental: -ingame_join Allow in-game joining -voicer Enable voice recognition Windows-only. Enables voice-recognition for wingmen commands. Must be specifically compiled into a build in order for it to be available; 3.6.10 final includes the feature. See Voice Recognition for more details. -fb_explosions Enable Framebuffer Shockwaves Development Tools: -fps Show frames per second on HUD Displays current frames per second. -pos Show position of camera Displays current position coordinates of camera. -window Run in window Runs the game in a window. No check to make sure that resolution is no higher than your desktop resolution, so be careful. -stats Show statistics Shows total and free physical memory, virtual memory and system pagefile. -coords Show coordinates Shows coordinates of the mouse cursor. -show_mem_usage Show memory usage Shows detailed RAM usage based on file, handler and process usage and display on the left-center side of the screen during mission load and while in mission. The meaning of the info displayed in the upper right corner of the HUD is: DYN = dynamic memory, basically anything that's been allocated by the vm_* memory functions. This does NOT indicate total memory usage but does account for most of it. POF = model memory, how much memory is being used by models (does not include tex‐ tures) C-BMP, BMP = bmpman memory, how much is used by the textures/images that are loaded. C-BMP means that you are using -cache_bitmaps and it will try to keep tex‐ tures in memory between level loads and as the new level is loading it will keep what it needs and unload what it doesn't. Can greatly increase level loading speed, but does so at the cost of memory between level loads. This does not increase over‐ all memory usage though, only during the loading screen. BMP means that it is not cached and all textures are unloaded from memory at the start of level load and all needed textures are then loaded from the disk again. S-RAM = sound memory, how much is used by the sounds loaded in memory at the time. This counts static sounds only (from sounds.tbl, etc.) and not streaming sounds (music, voices, briefing stuff, etc). V-RAM = approximate memory usage of video textures. This does not mean that your card has this much memory, and can report higher numbers that your card actually has memory. For OpenGL it also includes some of the geometry data, but this number does not reflect the total memory that your video card is using. It only reports how much data the game has purposefully loaded into API memory (meaning it could be in system memory, video card memory, or AGP memory). (It only works with debug builds, not with release builds). -pofspew Reads all objects in the pof file of the selected mod, and creates an ibx cache file for each object in the data/cache folder for that mod. Details for each object are output to a pofspew.txt file created in the data folder. Otherwise, ibx files are created in game before each mission. -tablecrcs Is actually now (or should be) a typed reference rather than as a selection item. Takes 1 argument, usually a descriptive name. Example usage: "-table_crcs MediaVPs" will create a table_crcs.csv file in the running mod (name can be separate of the mod selected) that allows for the validation of the tables used by that mod while on-line. The descriptive parameter given helps "allocate" that .csv file to the mod in question, and as such should closely or exactly match that mods name if possi‐ ble. -missioncrcs Is actually now (or should be) a typed reference rather than as a selection item. Takes 1 argument, usually a descriptive name. Example usage: "-mission_crcs Medi‐ aVPs" will create a mission_crcs.csv file in the running mod (name can be separate of the mod selected) that allows for the validation of the missions used by that mod while on-line. The descriptive parameter given helps "allocate" that .csv file to the mod in question, and as such should closely or exactly match that mods name if possible. -dis_collisions Disable collisions -dis_weapons Disable weapon rendering -output_sexps Output SEXPs to sexps.html This will make the FSO build spit out an html file that documents the supported SEXP's. Just double click on sexps.html and it should open in your default web browser. -output_scripting Output scripting to scripting.html This will make the FSO build spit out an html file that documents the supported scripting hooks and LUA libraries. Just double click on scripting.html and it should open in your default web browser. -save_render_target Save render targets to file -debug_window Display debug window Lists the fs2_open.log in (nearly)real-time generation. -verify_vps Spew VP CRCs to vp_crcs.txt Exports the CRC values of the VP files being loaded into a vp_crcs.txt file. -nograb Don't grab mouse/keyboard in a window Unix only. Disables focus grabbing in a window.
SEE ALSO Command-Line Reference http://www.hard-light.net/wiki/index.php/Command-Line_Reference
FreeSpace 2 Open December 2012 FREESPACE(6)