IPSVD-INSTRUCT(5) - Linux man page online | File formats
Format of the ipsvd(8) instructions directory.
ipsvd-instruct(5) File Formats Manual ipsvd-instruct(5)
NAMEipsvd-instruct - format of the ipsvd(8) instructions directory
DESCRIPTIONThe internet protocol service daemons, ipsvd(7), can be told to read and follow instruc‐ tions from a directory on incoming connections to the socket they listen on. For mostly static instructions or for performance reasons, it is possible to compile the instructions from a directory into a constant database (cdb) with ipsvd-cdb(8) for faster lookup, and to tell ipsvd(7) to read the instructions from there.
MATCHINGOn each incoming connection, the ipsvd(7) matches the client's IP address against files in the instructions directory. For example, the IP address a.b.c.d which reverse resolves to moa.bit.smarden.org is matched against the following files in the instructions directory, in this order, first match wins: 1. a.b.c.d 2. a.b.c 3. a.b 4. a If the client's hostname has been successfully looked up in DNS: 5. moa.bit.smarden.org 6. bit.smarden.org 7. smarden.org 8. org And finally the catchall file ``0'' (zero): 9. 0 After successfully matching a client's IP address or hostname against the instructions directory, ipsvd(7) examines the file that matched the IP address or hostname, and acts accordingly: 1. If neither the user's read permission, nor the user's execute permission is set for the file, the connection is closed immediately. 2. If the file has the user's execute permission set, ipsvd(7) reads the contents of the file and runs /bin/sh -c '<contents>' instead of the default program prog given at the command line for this connection. 3. If the file has the user's read permission set, ipsvd(7) reads the contents of the file and interprets each line as an instruction for this connection (see below). If the client's IP address or hostname doesn't match any file in the instructions direc‐ tory, the default action is taken (the program prog is run to handle the connection).
INSTRUCTIONSIf ipsvd(7) is given instructions for an incoming connection, it reads the corresponding file and interprets each line as follows. The file may be empty, meaning that there is no special instruction. Empty lines and lines starting with ``#'' are ignored. +VAR=VALUE environment. If the line starts with a plus (``+''), and the string following the plus contains a ``='', ipsvd(7) puts the string following the plus into the envi‐ ronment before starting prog to handle the connection. If the string following the plus doesn't contain a ``='', ipsvd(7) makes sure that the environment variable with the name string is not set. Cnum[:msg] concurrency. If the line starts with a ``C'', and is followed by a number, the per host concurrency limit for the IP address that initiated the connection is set to this number. If num is zero, per host concurrency limit is disabled. If num is followed by ``:msg'', the message msg is written to this client if possible, if the per host concurrency limit is reached. msg may contain backslash-escaped characters as follows: ``\\'' is converted to a single backslash, ``\n'' is converted to a new line character, and ``\r'' is con‐ verted to a carriage return. On multiple concurrency instructions the last processed concurrency instruction is considered. Not all ipsvd(7)'s support per host concurrency. =hostname[:forward] check hostname. If the line starts with a ``='', and is followed by a hostname, ipsvd(7) looks up the IP addresses for hostname in DNS and checks if the client's IP address matches one of these IP addresses. If so, ipsvd(7) stops processing the instructions here and runs prog. If hostname is followed a colon and forward, ipsvd(7) now examines the file forward and acts accordingly, instead of running prog. All check hostname instructions in forward are ignored. If forward does not exist, the connection is closed. hostname may be ``0'' (zero), matching any IP address. Note: Using check hostname instructions can cause significant delay while respond‐ ing to connection attempts, caused by DNS lookups. If ipsvd(7) cannot interpret a line, it prints a warning, discards the line, and continues with the next instruction if any. After processing all instructions, ipsvd(7) runs prog. If the file contains at least one check hostname instruction, and none was successful, it closes the connection instead of running prog.
EXAMPLE INSTRUCTIONS+MEMORY=20000 This instruction causes the environment variable ``MEMORY'' with the value ``20000'' to be available to the program prog that handles the connection. +DEBUG= This instruction adds the variable ``DEBUG'' with an empty value to the environ‐ ment. +LOGNAME This instructions makes sure that the environment variable ``LOGNAME'' is unset when running prog. C16 Set the per host concurrency to 16. A connection will be closed silently if there are already 16 active connections from this client's IP address. =floyd.dyn.smarden.org:127.0.0.1 Check IP address of the dynamic hostname floyd.dyn.smarden.org. If one of the IP addresses floyd.dyn.smarden.org currently resolves to matches the client's IP address, handle the connection through the file 127.0.0.1 in the instructions directory.
SEE ALSOipsvd(7), ipsvd-cdb(8), tcpsvd(8), sslsvd(8), udpsvd(8), sslio(8) http://smarden.org/ipsvd/
AUTHORGerrit Pape <@smarden.org>
|This manual||Reference||Other manuals|
|ipsvd-instruct(5)||referred by||ipsvd(7) | ipsvd-cdb(8) | tcpsvd(8) | udpsvd(8)|
|refer to||ipsvd(7) | ipsvd-cdb(8) | tcpsvd(8) | udpsvd(8)|