SIMPLE SOLUTIONS

LIEBERT(8) - man page online | administration and privileged commands

Driver for Liebert contact-closure UPS equipment.

Chapter
02/15/2014
LIEBERT(8)                                  NUT Manual                                 LIEBERT(8)

NAME

liebert - Driver for Liebert contact-closure UPS equipment

NOTE

This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.

EXTRA ARGUMENTS

This driver does not support any extra settings in the ups.conf(5).

BUGS

This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable. You may have to build another cable with DTR connected through to the UPS for it to work. There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a fundamental limitation of any contact-closure driver.

SEE ALSO

The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 2.7.1. 02/15/2014 LIEBERT(8)
This manual Reference Other manuals
liebert(8) referred by nutupsdrv(8) | upsd(8)
refer to nutupsdrv(8) | ups.conf(5)