MCXASSEMBLE(1) - Linux man page online | User commands

16 May 2014
mcxassemble(1) USER COMMANDS mcxassemble(1) NAME mcxassemble - transform raw cooccurrence data to mcl matrix format. SYNOPSIS mcxassemble -b base (base name) [-o fname (write to file fname)] [--write-binary (write output in binary format)] [--map (apply] [-raw-tf (apply transform spec to input)] [-rv MODE (repeated vectors)] [-re MODE (repeated entries)] [-ri MODE (adding mir‐ ror image)] [-r MODE (repeated entries/vectors/images)] [-prm-tf (apply transform spec to primary matrix)] [-sym-tf (apply transform spec to symmetrified matrix)] [-q (quiet mode)] The options above embody the default setup when using mcxassemble. There are many more options which mostly provide subtly different ways of doing input/output, set warning lev‐ els, or regulate how repeated entries and vectors should be treated. The full list of options is shown below. Read DESCRIPTION for learning about mcxassemble input/output and the functionality it provides. NOTE As of release 05-314 mcl(1) is able to cluster label-type input on the fly. In most cases, this will be sufficient. Alternatively, mcxload(1) can be used to map label-type input onto mcl matrices. Consequently, there are likely fewer scenarios nowadays where mcxassemble is the best solution. Consider first whether mcl in label mode or mcxload can do the job as well. mcxassemble [-b base (base name)] [-hdr fname (read header file)] [-raw fname (read raw file)] [--map (apply] [--cmap (apply base.cmap)] [--rmap (apply base.rmap)] [-map fname (apply fname)] [-rmap fname (apply fname)] [-cmap fname (apply fname)] [-tag tag (apply base.tag)] [-rtag tag (apply base.tag)] [-ctag tag (apply base.tag)] [-skw fname (write skew matrix)] [-prm fname (write primary result matrix)] [--skw (write base.skw)] [--prm (write base.prm)] [-xo suf (write base.suf)] [-o fname (write to file fname)] [-n (do not write default symmetrized result)] [-i (read from single data file)] [-digits int (digits width)] [-s (check for symmetry)] [-raw-tf (apply transform spec to input)] [-rv <mode> (action for repeated vectors)] [-re <mode> (action for repeated entries)] [-ri <mode> (adding mirror image)] [-r <mode> (same for entries and vectors)] [-prm-tf (apply transform spec to primary matrix)] [-sym-tf (apply transform spec to symmetrified matrix)] [--quiet-re (quiet for repeated entries)] [--quiet-rv (quiet for repeated vectors)] [-q (the two above combined)] [-h (print synopsis, exit)] [--apropos (print synopsis, exit)] [--version (print version, exit)] DESCRIPTION mcxassemble enables easy matrix creation from an intermediate raw matrix format that can easily be constructed from a one-pass-parse of cooccurrence data. The basic setup is as follows. · Parse cooccurrence data from some external format. · Transform cooccurrence data to raw mcl data as you parse. · When done, write out required header and domain information to a separate file. The domain information can be built during the parsing stage. · Use mcxassemble to construct a valid matrix from the raw data and the header information. · Nodes can optionally be relabeled by writing a separate map file to be read by mcxassem‐ ble, which takes the form of a very thin matrix file. The easiest thing to do is to group all input/output files under the same base name, say base. A standard way of proceeding, which will lead to a concise mcxassemble command line, is by creating the input files base.raw and base.hdr, and optionally the file The default behaviour of mcxassemble is then to create base.sym as the resulting matrix file, containing the symmetrized matrix constructed from the raw input. Example Suppose blastresult is a file containing blast results. The following two commands con‐ struct an mcl matrix file from the file. mcxdeblast --score=e --sort=a blastresult mcxassemble -b blastresult -r max --map mcxdeblast will generate the files blastresult.hdr, blastresult.raw, and The --sort=a option will create a map file corresponding with alphabetic ordering. These files are processed by mcxassemble and it will generate the file blastresult.sym. The -r option tells mcxassemble that repeated entries should be maxed; each time the largest entry seen thus far will be taken. Header file This file contains a header as usually found in generic mcl matrix files, i.e. the required header part, and optionally the domain part(s) if not all domains are canonical. Refer to mcxio(5) for more information. The domain information in the header file will be used to pre-construct a skeleton matrix and to validate the entries in the raw data file as they fill the skeleton matrix. Raw input format The file from which raw input is read should have the raw format as described in mcxio(5). Simply put; no header specification, no domain specification, and no matrix introduction syntax is used. The file just contains a listing of vectors. An example fragment is the following: 2 4:0.34 1:2.8838 4:2.328 1:4.238 1:12 $ 1 2:7.8 $ 2 1:0.01 4:20.3 3:2 $ The listing of vectors need not be sorted, and neither does a vector itself need to be sorted - the mcl generic matrix format is actually not different in this respect. Further‐ more, duplicate entries and duplicate vectors are allowed. This is in fact again allowed in the generic format, except that where applications expect generic format warnings will be issued and duplicate entries will be disregarded. mcxassemble allows customizable behav‐ iour dictating how to merge repeated entries. Refer to the -re, -rv, -r options below. The vectors read by mcxassemble do have to match the domains specified in the header file. The leading index that specifies the column index has to be present in the column domain; all subsequent indices that specify column entries have to be present in the row domain. If one concatenates the contents of the header file and the data file, the result is almost but not quite a file containing a matrix in syntactically correct mcl generic matrix for‐ mat. The parts missing are the (mclmatrix introduction token, (followed by) the begin token, and the closing ) token. Map file This file must contain a map matrix, which is a matrix with the following properties: · The column domain and row domain are of the same cardinality. · Each column has exactly one entry. · Each row domain index occurs in exactly one column. Such a matrix is used to relabel the nodes as found in the raw data. A situation that might occur when parsing some external format (and producing raw matrix format), is that ID's (indices) are handed out on the fly during the parse. Afterwards, one may want to relabel the IDs such that they correspond with an alphabetic listing of the quantity that is repre‐ sented by the node domain, or by some other sort criterion. A map file is then typically generated by the parser, as that is the utility in charge of the IDs. A small example of a map file for a graph containing five nodes is the following: (mclheader mcltype matrix dimensions 5x5 ) (mclmatrix begin 0 4 $ # mno 1 2 $ # ghi 2 1 $ # def 3 3 $ # jkl 4 0 $ # abc ) This corresponds to a relabeling such that the associated strings will be ordered alphabet‐ ically. Note that comments can be used to link string identifiers with indices. This map file says e.g. that the string identifier "mno" is represented by index 0 in the raw data, and by index 4 in the matrix output by mcxassemble. OPTIONS -b base (base name) Base name of files to be processed and output. Refer to DESCRIPTION above and the entries of other options below. -hdr fname (read header file) -raw fname (read raw file) Explicitly specify the header file and the data file (rather than constructing the file names from a base name and suffixes). --map (apply --cmap (apply base.cmap) --rmap (apply base.rmap) -map fname (apply fname) -rmap fname (apply fname) -cmap fname (apply fname) -tag tag (apply base.tag) -rtag tag (apply base.tag) -ctag tag (apply base.tag) Map options. --cmap combines with the -b option, and says that the map file in base.cmap (where base was specified with -b base) should be applied to the column domain only. --rmap works the same for the row domain, and --map can be used to apply the same map to both the column and row domains. -cmap and its siblings are used to explicitly specify the map file to be used, rather than combining a base name with a fixed suffix. -tag and its siblings work in conjunc‐ tion with the -b option, and require that a tag be specified from which to construct the map file (by appending it to the base name). -skw fname (write skew matrix) -prm fname (write primary result matrix) --prm (write base.prm) --skw (write base.skw) -n (do not write default symmetrized result) Options for writing matrices other than the default symmetrized result. The primary result matrix is the matrix constructed from reading in the raw data and adding entries to the skeleton matrix as specified with the -r, -re, and -rv options. This matrix can be written using one of the prm options. Calling the primary matrix A, the skew matrix (as defined here) is the matrix A - A^T, i.e. A minus its transposed matrix. It can be written using one of the skw options. If for some reason the symmetrized result is not needed, its output can be prevented using the -n option. -xo suf (write base.suf) -o fname (write to file fname) -i (read from single data file) -digits int (digits width) --write-binary (write output in binary format) The -xo option is used in conjunction with the -b option in order to change the suffix for the file in which the symmetrized result matrix is written. Use e.g. -xo mci to change the suffix from the default value sym to mci. Use -o to explicitly specify the filename in full. Use -digits to set the number of digits written for matrix entries (c.q. edge weights). The -i option is special. It causes mcxassemble to read both the header information and the raw data from the same file, where the syntax should be fully conforming to generic mcl matrix format. -s (check for symmetry) This will check whether the primary result matrix was symmetric. It reports the number of failing (or skew) edges. -raw-tf <tf-spec> (apply transform spec to input) -prm-tf (apply transform spec to primary matrix) -sym-tf (apply transform spec to symmetrified matrix) The first applies its transformation spec to the values as found in the raw data. The second applies its transformation spec to the primary matrix. The third applies its transformation step to the symmetrified matrix. Refer to mcxio(5) for documentation on the transformation spec syntax. -rv add|max|min|mul|left|right (action for repeated vectors) -re add|max|min|mul|left|right (action for repeated entries) -ri add|max|min|mul (adding mirror image) -r add|max|min|mul|left|right (same for entries and vectors) Merge options, dictating the behaviour when repeated entries are found. A distinction is made between entries that are repeated within the same column listing, and entries that are repeated between different column listings. An entry can be a repeat of both kinds simultaneously as well. Additionally, the final result is by default symmetrized by com‐ bining with the mirror image (in matrix terminology, the transposed matrix). This sym‐ metrization can be done in the same variety of ways. The re option, for repeats within the same column, is carried out first. It is applied after the column has its entries sorted, so the left and right options are not garantueed to follow the order found in the raw input. The rv option, for repeats over different columns, is carried out second. The option -ri min can assist in implementing a (top-list) best reciprocal hit criterion. Examples The column 0 1:30 1:50 2:60 4:70 3:20 1:40 2:40 $ is encountered in the input, listing entries for the vector labeled with index 0. If -re add or -r add is used, it will transform to the vector 0 1:120 2:60 3:20 4:70 $ If -re max or -r add is used instead, it will transform to the vector 0 1:40 2:60 3:20 4:70 $ Suppose add mode is used, and that later on another vector specification for the index 0 is found, leading to this transformed vector: 0 1:60 2:80 4:40 $ If -rv max was specified, this new vector is combined with the previous vector by taking the entry wise maximum: 0 1:120 2:60 3:20 4:70 $ # first (transformed) vector 0 1:60 2:80 4:40 $ # second vector 0 1:120 2:80 3:20 4:70 $ # entry wise maximum Finally, suppose that somewhere one or more vector listings were specified for index 3, which eventually led to an entry 0:50. The final symmetrization step will take the [0,3] entry of weight 20 and combine it with the [3,0] entry of weight 50. The resulting matrix will then have the [0,3] and the [3,0] entry both equal to either the maximum, the sum, or the product of the two quantities 50 and 20. --quiet-re (quiet for repeated entries) --quiet-rv (quiet for repeated vectors) -q (the two above combined) Warning options. Turn these on if you expect the raw data to be free of repeats. AUTHOR Stijn van Dongen. SEE ALSO mcxio(5), mcl(1), mcxload(1) and mclfamily(7) for an overview of all the documentation and the utilities in the mcl family. mcxassemble 14-137 16 May 2014 mcxassemble(1)
This manual Reference Other manuals
mcxassemble(1) referred by mclfamily(7) | mclindex(7) | mclpipeline(1) | mcxio(5)
refer to mcl(1) | mclfamily(7) | mcxio(5) | mcxload(1)
Download raw manual
Index User Commands (+6086) mcxassemble 14-137 (+1) № 1 (+39907)
Go top