SIMPLE SOLUTIONS

METASYS(8) - man page online | administration and privileged commands

Driver for Meta System UPS equipment.

Chapter
02/15/2014
METASYS(8)                                  NUT Manual                                 METASYS(8)

NAME metasys - Driver for Meta System UPS equipment
NOTE This man page only documents the hardware-specific features of the metasys driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE The metasys driver was written with the "Meta System UPS Protocol Rev.1.12" kindly supplied from Meta System. The driver should support all the common features of the ups models: · HF Line (/2) 1-8 boards · HF Millennium (810, 820) · HF TOP Line (910, 920, 930, 940, 950, 970, 980) · ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000) · ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI) · ally HF (800, 1000, 1250, 1600, 2000, 2500) · Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)
CABLING The needed cable is a standard pin-to-pin serial cable with at least pins 2, 3, and 5 (on DB9 connector) connected.
EXTRA ARGUMENTS This driver supports no extra arguments from ups.conf(5).
BUGS This driver has been tested on Meta System HF Millennium 820 and ally HF 1000 only. Any information about the use of the driver with the other listed UPS are really welcome.
AUTHOR Fabio Di Niro <@users.sourceforge.net>
SEE ALSO The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 2.7.1. 02/15/2014 METASYS(8)
This manual Reference Other manuals
metasys(8) referred by nutupsdrv(8)
refer to nutupsdrv(8) | ups.conf(5)