OPTIONS(3TK) - Linux man page online | Library functions
Standard options supported by widgets.
options(3tk) Tk Built-In Commands options(3tk) _________________________________________________________________________________________________
Tk 4.4 options(3tk)
NAMEoptions - Standard options supported by widgets _________________________________________________________________________________________________
DESCRIPTIONThis manual entry describes the common configuration options supported by widgets in the Tk toolkit. Every widget does not necessarily support every option (see the manual entries for individual widgets for a list of the standard options supported by that wid‐ get), but if a widget does support an option with one of the names listed below, then the option has exactly the effect described below. In the descriptions below, “Command-Line Name” refers to the switch used in class commands and configure widget commands to set this value. For example, if an option's command-line switch is -foreground and there exists a widget .a.b.c, then the command .a.b.c configure -foreground black may be used to specify the value black for the option in the widget .a.b.c. Command-line switches may be abbreviated, as long as the abbreviation is unambiguous. “Database Name” refers to the option's name in the option database (e.g. in .Xdefaults files). “Database Class” refers to the option's class value in the option database. Command-Line Name:-activebackground Database Name: activeBackground Database Class: Foreground Specifies background color to use when drawing active elements. An element (a wid‐ get or portion of a widget) is active if the mouse cursor is positioned over the element and pressing a mouse button will cause some action to occur. If strict Motif compliance has been requested by setting the tk_strictMotif variable, this option will normally be ignored; the normal background color will be used instead. For some elements on Windows and Macintosh systems, the active color will only be used while mouse button 1 is pressed over the element. Command-Line Name:-activeborderwidth Database Name: activeBorderWidth Database Class: BorderWidth Specifies a non-negative value indicating the width of the 3-D border drawn around active elements. See above for definition of active elements. The value may have any of the forms acceptable to Tk_GetPixels. This option is typically only avail‐ able in widgets displaying more than one element at a time (e.g. menus but not but‐ tons). Command-Line Name:-activeforeground Database Name: activeForeground Database Class: Background Specifies foreground color to use when drawing active elements. See above for def‐ inition of active elements. Command-Line Name:-anchor Database Name: anchor Database Class: Anchor Specifies how the information in a widget (e.g. text or a bitmap) is to be dis‐ played in the widget. Must be one of the values n, ne, e, se, s, sw, w, nw, or center. For example, nw means display the information such that its top-left cor‐ ner is at the top-left corner of the widget. Command-Line Name:-background or -bg Database Name: background Database Class: Background Specifies the normal background color to use when displaying the widget. Command-Line Name:-bitmap Database Name: bitmap Database Class: Bitmap Specifies a bitmap to display in the widget, in any of the forms acceptable to Tk_GetBitmap. The exact way in which the bitmap is displayed may be affected by other options such as -anchor or -justify. Typically, if this option is specified then it overrides other options that specify a textual value to display in the wid‐ get but this is controlled by the -compound option; the -bitmap option may be reset to an empty string to re-enable a text display. In widgets that support both -bit‐ map and -image options, -image will usually override -bitmap. Command-Line Name:-borderwidth or -bd Database Name: borderWidth Database Class: BorderWidth Specifies a non-negative value indicating the width of the 3-D border to draw around the outside of the widget (if such a border is being drawn; the -relief option typically determines this). The value may also be used when drawing 3-D effects in the interior of the widget. The value may have any of the forms accept‐ able to Tk_GetPixels. Command-Line Name:-cursor Database Name: cursor Database Class: Cursor Specifies the mouse cursor to be used for the widget. The value may have any of the forms acceptable to Tk_GetCursor. In addition, if an empty string is speci‐ fied, it indicates that the widget should defer to its parent for cursor specifica‐ tion. Command-Line Name:-compound Database Name: compound Database Class: Compound Specifies if the widget should display text and bitmaps/images at the same time, and if so, where the bitmap/image should be placed relative to the text. Must be one of the values none, bottom, top, left, right, or center. For example, the (default) value none specifies that the bitmap or image should (if defined) be dis‐ played instead of the text, the value left specifies that the bitmap or image should be displayed to the left of the text, and the value center specifies that the bitmap or image should be displayed on top of the text. Command-Line Name:-disabledforeground Database Name: disabledForeground Database Class: DisabledForeground Specifies foreground color to use when drawing a disabled element. If the option is specified as an empty string (which is typically the case on monochrome dis‐ plays), disabled elements are drawn with the normal foreground color but they are dimmed by drawing them with a stippled fill pattern. Command-Line Name:-exportselection Database Name: exportSelection Database Class: ExportSelection Specifies whether or not a selection in the widget should also be the X selection. The value may have any of the forms accepted by Tcl_GetBoolean, such as true, false, 0, 1, yes, or no. If the selection is exported, then selecting in the wid‐ get deselects the current X selection, selecting outside the widget deselects any widget selection, and the widget will respond to selection retrieval requests when it has a selection. The default is usually for widgets to export selections. Command-Line Name:-font Database Name: font Database Class: Font Specifies the font to use when drawing text inside the widget. The value may have any of the forms described in the font manual page under FONT DESCRIPTION. Command-Line Name:-foreground or -fg Database Name: foreground Database Class: Foreground Specifies the normal foreground color to use when displaying the widget. Command-Line Name:-highlightbackground Database Name: highlightBackground Database Class: HighlightBackground Specifies the color to display in the traversal highlight region when the widget does not have the input focus. Command-Line Name:-highlightcolor Database Name: highlightColor Database Class: HighlightColor Specifies the color to use for the traversal highlight rectangle that is drawn around the widget when it has the input focus. Command-Line Name:-highlightthickness Database Name: highlightThickness Database Class: HighlightThickness Specifies a non-negative value indicating the width of the highlight rectangle to draw around the outside of the widget when it has the input focus. The value may have any of the forms acceptable to Tk_GetPixels. If the value is zero, no focus highlight is drawn around the widget. Command-Line Name:-image Database Name: image Database Class: Image Specifies an image to display in the widget, which must have been created with the image create command. Typically, if the -image option is specified then it over‐ rides other options that specify a bitmap or textual value to display in the wid‐ get, though this is controlled by the -compound option; the -image option may be reset to an empty string to re-enable a bitmap or text display. Command-Line Name:-insertbackground Database Name: insertBackground Database Class: Foreground Specifies the color to use as background in the area covered by the insertion cur‐ sor. This color will normally override either the normal background for the widget (or the selection background if the insertion cursor happens to fall in the selec‐ tion). Command-Line Name:-insertborderwidth Database Name: insertBorderWidth Database Class: BorderWidth Specifies a non-negative value indicating the width of the 3-D border to draw around the insertion cursor. The value may have any of the forms acceptable to Tk_GetPixels. Command-Line Name:-insertofftime Database Name: insertOffTime Database Class: OffTime Specifies a non-negative integer value indicating the number of milliseconds the insertion cursor should remain “off” in each blink cycle. If this option is zero then the cursor does not blink: it is on all the time. Command-Line Name:-insertontime Database Name: insertOnTime Database Class: OnTime Specifies a non-negative integer value indicating the number of milliseconds the insertion cursor should remain “on” in each blink cycle. Command-Line Name:-insertwidth Database Name: insertWidth Database Class: InsertWidth Specifies a value indicating the total width of the insertion cursor. The value may have any of the forms acceptable to Tk_GetPixels. If a border has been speci‐ fied for the insertion cursor (using the -insertborderwidth option), the border will be drawn inside the width specified by the -insertwidth option. Command-Line Name:-jump Database Name: jump Database Class: Jump For widgets with a slider that can be dragged to adjust a value, such as scroll‐ bars, this option determines when notifications are made about changes in the value. The option's value must be a boolean of the form accepted by Tcl_Get‐ Boolean. If the value is false, updates are made continuously as the slider is dragged. If the value is true, updates are delayed until the mouse button is released to end the drag; at that point a single notification is made (the value “jumps” rather than changing smoothly). Command-Line Name:-justify Database Name: justify Database Class: Justify When there are multiple lines of text displayed in a widget, this option determines how the lines line up with each other. Must be one of left, center, or right. Left means that the lines' left edges all line up, center means that the lines' centers are aligned, and right means that the lines' right edges line up. Command-Line Name:-orient Database Name: orient Database Class: Orient For widgets that can lay themselves out with either a horizontal or vertical orien‐ tation, such as scrollbars, this option specifies which orientation should be used. Must be either horizontal or vertical or an abbreviation of one of these. Command-Line Name:-padx Database Name: padX Database Class: Pad Specifies a non-negative value indicating how much extra space to request for the widget in the X-direction. The value may have any of the forms acceptable to Tk_GetPixels. When computing how large a window it needs, the widget will add this amount to the width it would normally need (as determined by the width of the things displayed in the widget); if the geometry manager can satisfy this request, the widget will end up with extra internal space to the left and/or right of what it displays inside. Most widgets only use this option for padding text: if they are displaying a bitmap or image, then they usually ignore padding options. Command-Line Name:-pady Database Name: padY Database Class: Pad Specifies a non-negative value indicating how much extra space to request for the widget in the Y-direction. The value may have any of the forms acceptable to Tk_GetPixels. When computing how large a window it needs, the widget will add this amount to the height it would normally need (as determined by the height of the things displayed in the widget); if the geometry manager can satisfy this request, the widget will end up with extra internal space above and/or below what it dis‐ plays inside. Most widgets only use this option for padding text: if they are displaying a bitmap or image, then they usually ignore padding options. Command-Line Name:-relief Database Name: relief Database Class: Relief Specifies the 3-D effect desired for the widget. Acceptable values are raised, sunken, flat, ridge, solid, and groove. The value indicates how the interior of the widget should appear relative to its exterior; for example, raised means the interior of the widget should appear to protrude from the screen, relative to the exterior of the widget. Command-Line Name:-repeatdelay Database Name: repeatDelay Database Class: RepeatDelay Specifies the number of milliseconds a button or key must be held down before it begins to auto-repeat. Used, for example, on the up- and down-arrows in scroll‐ bars. Command-Line Name:-repeatinterval Database Name: repeatInterval Database Class: RepeatInterval Used in conjunction with -repeatdelay: once auto-repeat begins, this option deter‐ mines the number of milliseconds between auto-repeats. Command-Line Name:-selectbackground Database Name: selectBackground Database Class: Foreground Specifies the background color to use when displaying selected items. Command-Line Name:-selectborderwidth Database Name: selectBorderWidth Database Class: BorderWidth Specifies a non-negative value indicating the width of the 3-D border to draw around selected items. The value may have any of the forms acceptable to Tk_Get‐ Pixels. Command-Line Name:-selectforeground Database Name: selectForeground Database Class: Background Specifies the foreground color to use when displaying selected items. Command-Line Name:-setgrid Database Name: setGrid Database Class: SetGrid Specifies a boolean value that determines whether this widget controls the resizing grid for its top-level window. This option is typically used in text widgets, where the information in the widget has a natural size (the size of a character) and it makes sense for the window's dimensions to be integral numbers of these units. These natural window sizes form a grid. If the -setgrid option is set to true then the widget will communicate with the window manager so that when the user interactively resizes the top-level window that contains the widget, the dimensions of the window will be displayed to the user in grid units and the window size will be constrained to integral numbers of grid units. See the section GRIDDED GEOMETRY MANAGEMENT in the wm manual entry for more details. Command-Line Name:-takefocus Database Name: takeFocus Database Class: TakeFocus Determines whether the window accepts the focus during keyboard traversal (e.g., Tab and Shift-Tab). Before setting the focus to a window, the traversal scripts consult the value of the -takefocus option. A value of 0 means that the window should be skipped entirely during keyboard traversal. 1 means that the window should receive the input focus as long as it is viewable (it and all of its ances‐ tors are mapped). An empty value for the option means that the traversal scripts make the decision about whether or not to focus on the window: the current algo‐ rithm is to skip the window if it is disabled, if it has no key bindings, or if it is not viewable. If the value has any other form, then the traversal scripts take the value, append the name of the window to it (with a separator space), and evalu‐ ate the resulting string as a Tcl script. The script must return 0, 1, or an empty string: a 0 or 1 value specifies whether the window will receive the input focus, and an empty string results in the default decision described above. Note: this interpretation of the option is defined entirely by the Tcl scripts that implement traversal: the widget implementations ignore the option entirely, so you can change its meaning if you redefine the keyboard traversal scripts. Command-Line Name:-text Database Name: text Database Class: Text Specifies a string to be displayed inside the widget. The way in which the string is displayed depends on the particular widget and may be determined by other options, such as -anchor or -justify. Command-Line Name:-textvariable Database Name: textVariable Database Class: Variable Specifies the name of a global variable. The value of the variable is a text string to be displayed inside the widget; if the variable value changes then the widget will automatically update itself to reflect the new value. The way in which the string is displayed in the widget depends on the particular widget and may be determined by other options, such as -anchor or -justify. Command-Line Name:-troughcolor Database Name: troughColor Database Class: Background Specifies the color to use for the rectangular trough areas in widgets such as scrollbars and scales. This option is ignored for scrollbars on Windows (native widget does not recognize this option). Command-Line Name:-underline Database Name: underline Database Class: Underline Specifies the integer index of a character to underline in the widget. This option is used by the default bindings to implement keyboard traversal for menu buttons and menu entries. 0 corresponds to the first character of the text displayed in the widget, 1 to the next character, and so on. Command-Line Name:-wraplength Database Name: wrapLength Database Class: WrapLength For widgets that can perform word-wrapping, this option specifies the maximum line length. Lines that would exceed this length are wrapped onto the next line, so that no line is longer than the specified length. The value may be specified in any of the standard forms for screen distances. If this value is less than or equal to 0 then no wrapping is done: lines will break only at newline characters in the text. Command-Line Name:-xscrollcommand Database Name: xScrollCommand Database Class: ScrollCommand Specifies the prefix for a command used to communicate with horizontal scrollbars. When the view in the widget's window changes (or whenever anything else occurs that could change the display in a scrollbar, such as a change in the total size of the widget's contents), the widget will generate a Tcl command by concatenating the scroll command and two numbers. Each of the numbers is a fraction between 0 and 1, which indicates a position in the document. 0 indicates the beginning of the docu‐ ment, 1 indicates the end, .333 indicates a position one third the way through the document, and so on. The first fraction indicates the first information in the document that is visible in the window, and the second fraction indicates the information just after the last portion that is visible. The command is then passed to the Tcl interpreter for execution. Typically the -xscrollcommand option consists of the path name of a scrollbar widget followed by “set”, e.g. “.x.scrollbar set”: this will cause the scrollbar to be updated whenever the view in the window changes. If this option is not specified, then no command will be executed. Command-Line Name:-yscrollcommand Database Name: yScrollCommand Database Class: ScrollCommand Specifies the prefix for a command used to communicate with vertical scrollbars. This option is treated in the same way as the -xscrollcommand option, except that it is used for vertical scrollbars and is provided by widgets that support vertical scrolling. See the description of -xscrollcommand for details on how this option is used.
SEE ALSOcolors, cursors, font
KEYWORDSclass, name, standard option, switch
|This manual||Reference||Other manuals|
|options(3tk)||referred by||checkbutton(3tk) | colors(3tk) | cursor(3tk) | font(3tk) | image(3tk) | option(3tk) | radiobutton(3tk) | treectrl(3tk) | Trf_SafeInit(3) | ttk::widget(3tk) | ttk_widget(3tk)|