RHINO(8) - man page online | administration and privileged commands
Driver for Brazilian Microsol RHINO UPS equipment.
RHINO(8) NUT Manual RHINO(8)
NAMErhino - Driver for Brazilian Microsol RHINO UPS equipment
NOTEThis man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWAREThis driver has been tested with : · Rhino 6000 VA · Rhino 7500 VA · Rhino 10000 VA · Rhino 20000 VA All Rhino models are sinusoidal on-line.
EXTRA ARGUMENTSThis driver support the following extra optional settings in ups.conf(5): battext = n - (default = 0, no extra battery, where n = Ampere*hour )
COMMANDS· load.on - Turn on the load immediately · load.off - Turn off the load immediately · bypass.start - Put the UPS in bypass mode · bypass.stop - Put the UPS out of bypass mode · shutdown.stayoff - Shut down in 3 minutes and do not return
AUTHORSilvino B. Magalhães <@gmail.com>
Network UPS Tools 2.7.1. 02/15/2014 RHINO(8)
SEE ALSOThe core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|This manual||Reference||Other manuals|
|refer to||nutupsdrv(8) | ups.conf(5)|