SONAR(6X) - Linux man page online | Games
Display a sonar scope.
sonar(6x) XScreenSaver manual sonar(6x)
X Version 11 5.36 (10-Oct-2016) sonar(6x)
NAMEsonar - display a sonar scope
SYNOPSISsonar [-ping hosts-or-subnets] [-ping-timeout int] [-delay usecs] [-speed ratio] [-sweep- size ratio] [-font-size points] [-team-a-name string] [-team-b-name string] [-team-a-count int] [-team-b-count int] [-no-dns] [-no-times] [-no-wobble] [-debug] [-fps]
DESCRIPTIONThis draws a sonar screen that pings (get it?) the hosts on your local network, and plots their distance (response time) from you. The three rings represent ping times of approxi‐ mately 2.5, 70 and 2,000 milliseconds respectively. Alternately, it can run a simulation that doesn't involve hosts.
OPTIONSsonar understands the following options: -ping hosts-or-subnets The list of things to ping, separated by commas or spaces. Elements of this list may be: simulation Run in simulation mode instead of pinging real hosts. hostname Ping the given host. A.B.C.D Ping the given IPv4 address. subnet Ping the local subnet. On systems where we can determine the local network mask, we use that; otherwise, we assume Class C (254 hosts). subnet/NN Ping a different-sized local subnet: e.g., subnet/28 would ping a 4-bit subnet (the nearest 14 addresses). On systems where we can determine the local network mask, we always use that. A.B.C.D/NN Ping an arbitrary other IPv4 subnet. The address specifies the base address, and the part after the slash is how wide the subnet is. Typ‐ ical values are /24 (for 254 addresses) and /28 (for 14 addresses). filename Ping the hosts listed in the given file. This file can be in the for‐ mat used by /etc/hosts, or it can be any file that has host names as the first or second element on each line. If you use ssh, try this: sonar -ping $HOME/.ssh/known_hosts -ping-timeout int The amount of time in milliseconds the program will wait for an answer to a ping. -delay int Delay between frames, in microseconds. Default 20000. -speed ratio Less than 1 for slower, greater than 1 for faster. Default 1. -sweep-size ratio How big the glowing sweep area should be. Default 0.3. -font-size points How large the text should be. Default 10 points. -no-wobble Keep the display stationary instead of very slowly wobbling back and forth. -no-dns Do not attempt to resolve IP addresses to hostnames. -no-times Do not display ping times beneath the host names. -team-a-name string In simulation mode, the name of team A. -team-b-name string In simulation mode, the name of team B. -team-a-count int In simulation mode, the number of bogies on team A. -team-b-count int In simulation mode, the number of bogies on team B. -fps Display the current frame rate, polygon count, and CPU load.
NOTESOn most Unix systems, this program must be installed as setuid root in order to ping hosts. This is because root privileges are needed to create an ICMP RAW socket. Privi‐ leges are disavowed shortly after startup (just after connecting to the X server) so this is believed to be safe: chown root:root sonar chmod u+s sonar It is not necessary to make it setuid on MacOS systems, because on MacOS, unprivileged programs can ping by using ICMP DGRAM sockets instead of ICMP RAW. In ping-mode, the display is a logarithmic scale, calibrated so that the three rings rep‐ resent ping times of approximately 2.5, 70 and 2,000 milliseconds respectively. This means that if any the hosts you are pinging take longer than 2 seconds to respond, they won't show up; and if you are pinging several hosts with very fast response times, they will all appear close to the center of the screen (making their names hard to read.)
BUGSDoes not support IPv6.
SEE ALSOX(1), xscreensaver(1), ping(8), ping6(8)
COPYRIGHTCopyright © 2000-2012 by Jamie Zawinski <@jwz.org> Copyright © 1998 by Stephen Martin. <@canada.com> Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. No representations are made about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.
AUTHORSStephen Martin <@canada.com>, 3-nov-1998. Subnet support, etc. added by Jamie Zawinski, 17-Jul-2000. Rewritten using OpenGL instead of X11 by Jamie Zawinski, 12-Aug-2008.
|This manual||Reference||Other manuals|
|refer to||ping(8) | xscreensaver(1)|