TRIPPLITESU(8) - man page online | administration and privileged commands

Driver for Tripp-Lite SmartOnline (SU) UPS equipment.

TRIPPLITESU(8)                              NUT Manual                             TRIPPLITESU(8)

NAME tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment
NOTE This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE This driver supports the Tripp Lite SmartOnline family (via the serial port).
EXTRA ARGUMENTS This driver supports the following optional settings in the ups.conf(5): lowbatt=num Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low battery until there are only a few seconds left. Common values are around 25—30.
AUTHOR Allan N. Hessenflow <>
SEE ALSO The core driver: nutupsdrv(8) Other drivers for Tripp-Lite hardware: tripplite(8), tripplite_usb(8), usbhid-ups(8) Internet resources: The NUT (Network UPS Tools) home page:
Network UPS Tools 2.7.1. 02/15/2014 TRIPPLITESU(8)
This manual Reference Other manuals
tripplitesu(8) referred by nutupsdrv(8) | tripplite(8) | tripplite_usb(8) | upsd(8)
refer to nutupsdrv(8) | tripplite(8) | tripplite_usb(8) | ups.conf(5) | upsmon(8) | usbhid-ups(8)