UPSSTATS.CGI(8) - man page online | administration and privileged commands
Web-based UPS status viewer.
UPSSTATS.CGI(8) NUT Manual UPSSTATS.CGI(8)
NAMEupsstats.cgi - Web-based UPS status viewer
SYNOPSISupsstats.cgi Note As a CGI program, this should be invoked through your web server. If you run it from the command line, it will either complain about unauthorized access or spew a bunch of HTML at you.
DESCRIPTIONupsstats.cgi uses template files to build web pages containing status information from UPS hardware. It can repeat sections of those template files to monitor several UPSes simultaneously, or focus on a single UPS. These templates can also include references to upsimage.cgi(8) for graphical displays of battery charge levels, voltage readings, and the UPS load.
ACCESS CONTROLupsstats will only talk to upsd(8) servers that have been defined in your hosts.conf(5). If it complains that "Access to that host is not authorized", check that file first.
TEMPLATESThe web page that is displayed is actually a template containing commands to upsstats which are replaced by status information. The default file used for the overview is upsstats.html. When monitoring a single UPS, the file displayed is upsstats-single.html. The format of these files, including the possible commands, is documented in upsstats.html(5).
FILEShosts.conf(5), upsstats.html(5), upsstats-single.html
Network UPS Tools 2.7.1. 02/25/2014 UPSSTATS.CGI(8)
SEE ALSOupsimage.cgi(8) Internet resources: The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|This manual||Reference||Other manuals|
|upsstats.cgi(8)||referred by||hosts.conf(5) | nutupsdrv(8) | upsd(8) | upsimage.cgi(8) | upsmon(8) | upsstats.html(5)|
|refer to||hosts.conf(5) | upsd(8) | upsimage.cgi(8) | upsstats.html(5)|