VICTRONUPS(8) - man page online | administration and privileged commands

Driver for IMV/Victron UPS unit Match, Match Lite, NetUps.

VICTRONUPS(8)                               NUT Manual                              VICTRONUPS(8)

NAME victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps
NOTE This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line. The Match Lite line may only report a handful of variables. This is usually not a bug - they just don’t support anything else.
CABLING If your Victron cable is broken or missing, use this diagram to build a clone: docs/cables/victron.txt
EXTRA ARGUMENTS This driver supports the following optional setting in the ups.conf(5): modelname=name Set model name usd=delay Set delay before shutdown on UPS
BUGS The protocol for this UPS is not officially documented.
AUTHOR Radek Benedikt <>, Daniel Prynych <>
SEE ALSO The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page:
Network UPS Tools 2.7.1. 02/15/2014 VICTRONUPS(8)
This manual Reference Other manuals
victronups(8) referred by nutupsdrv(8) | upsd(8)
refer to nutupsdrv(8) | ups.conf(5)