SIMPLE SOLUTIONS

__PPC_SET_PPR_MED, … - reference manual online

Set the Program Priority Register.

Chapter
2015-12-05
__PPC_SET_PPR_MED(3)                 LinuxProgrammer's Manual                __PPC_SET_PPR_MED(3)

NAME __ppc_set_ppr_med, __ppc_set_ppr_very_low, __ppc_set_ppr_low, __ppc_set_ppr_med_low, __ppc_set_ppr_med_high - Set the Program Priority Register
SYNOPSIS #include <sys/platform/ppc.h> void __ppc_set_ppr_med(void); void __ppc_set_ppr_very_low(void); void __ppc_set_ppr_low(void); void __ppc_set_ppr_med_low(void); void __ppc_set_ppr_med_high(void);
DESCRIPTION These functions provide access to the Program Priority Register (PPR) on the Power archi‐ tecture. The PPR is a 64-bit register that controls the program's priority. By adjusting the PPR value the programmer may improve system throughput by causing system resources to be used more efficiently, especially in contention situations. The available unprivileged states are covered by the following functions: * __ppc_set_ppr_med() sets the Program Priority Register value to medium (default). * __ppc_set_ppr_very_low() sets the Program Priority Register value to very low. * __ppc_set_ppr_low() sets the Program Priority Register value to low. * __ppc_set_ppr_med_low() sets the Program Priority Register value to medium low. The privileged state medium high may also be set during certain time intervals by problem- state (unprivileged) programs, with the following function: * __ppc_set_ppr_med_high() sets the Program Priority to medium high. If the program priority is medium high when the time interval expires or if an attempt is made to set the priority to medium high when it is not allowed, the priority is set to medium.
VERSIONS The functions __ppc_set_ppr_med(), __ppc_set_ppr_low() and __ppc_set_ppr_med_low() are provided by glibc since version 2.18. The functions __ppc_set_ppr_very_low() and __ppc_set_ppr_med_high() first appeared in glibc in version 2.23.
ATTRIBUTES For an explanation of the terms used in this section, see attributes(7). ┌───────────────────────────┬───────────────┬─────────┐ │Interface │ Attribute │ Value │ ├───────────────────────────┼───────────────┼─────────┤ │__ppc_set_ppr_med(), │ Thread safety │ MT-Safe │ │__ppc_set_ppr_very_low(), │ │ │ │__ppc_set_ppr_low(), │ │ │ │__ppc_set_ppr_med_low(), │ │ │ │__ppc_set_ppr_med_high() │ │ │ └───────────────────────────┴───────────────┴─────────┘
CONFORMING TO These functions are nonstandard GNU extensions.
SEE ALSO __ppc_yield(3) Power ISA, Book II - Section 3.1 (Program Priority Registers)
COLOPHON This page is part of release 4.04 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at http://www.kernel.org/doc/man-pages/.
GNU C Library 2015-12-05 __PPC_SET_PPR_MED(3)
This manual Reference Other manuals
__ppc_set_ppr_med(3) referred by __ppc_yield(3)
refer to attributes(7) | __ppc_yield(3)