AOE-DISCOVER(8) - Linux man page online | Administration and privileged commands

Tell aoe driver to discover AoE devices.

aoe-discover(8) System Manager's Manual aoe-discover(8)


aoe-discover - tell aoe driver to discover AoE devices




The aoe-discover command tells the aoe driver to discover ATA over Ethernet (AoE) devices on the network. All network interfaces will be probed with a AoE config query broadcast. If the aoe-interfaces command has limited the allowable network interfaces, only devices discovered via allowable interfaces will become available. The default is to make avail‐ able all AoE devices found on all accessible ethernet networks. It's good to run the aoe-discover command after running aoe-interfaces.


In this example, the root user on a host named nai loads the aoe module with only eth0 allowable for AoE traffic. After remembering that shelf 7 is on eth3, this sysadmin uses aoe-interfaces to add eth3 to the list of allowable network interfaces and then calls aoe- discover to ask the aoe driver to look for new AoE devices. nai:~# modprobe aoe aoe_iflist="eth0" nai:~# aoe-stat e10.9 eth0 up nai:~# aoe-interfaces eth0 eth3 nai:~# aoe-discover nai:~# aoe-stat e7.0 eth3 up e7.1 eth3 up e7.2 eth3 up e7.3 eth3 up e7.4 eth3 up e7.5 eth3 up e7.6 eth3 up e7.7 eth3 up e7.8 eth3 up e7.9 eth3 up e10.9 eth0 up


aoe-interfaces(8), aoe-stat(8), aoetools(8).


Ed L. Cashin (
This manual Reference Other manuals
aoe-discover(8) referred by aoe-flush(8) | aoe-interfaces(8) | aoe-mkdevs(8) | aoe-mkshelf(8) | aoe-stat(8) | aoe-version(8) | aoecfg(8) | aoeping(8) | coraid-update(8)
refer to aoe-interfaces(8) | aoe-stat(8)
Download raw manual
Index System Manager's Manual (+2060) № 8 (+5755)
Go top