AOE-FLUSH(8) - man page online | administration and privileged commands
Flush the down devices out of the aoe driver.
aoe-flush(8) System Manager's Manual aoe-flush(8)
NAMEaoe-flush - flush the down devices out of the aoe driver
SYNOPSISaoe-flush [-a] aoe-flush dev1 [dev2 ...]
DESCRIPTIONThe aoe-flush command tells the aoe driver to remove devices from the system and forget about them. Normally the aoe driver will remember all devices it has seen until the mod‐ ule is unloaded. By default, aoe-flush will only flush downed devices. With the -a flag all devices are candidates for removal. aoe-flush will not remove devices that are in use. This includes devices in the closewait state or those in the process of being installed. By specifying a series of specific aoe devices, e.g., e7.0 e3.2, it is possible to ask the aoe driver to forget these devices. This feature may be convenient after a temporary AoE target is no longer being used.
OPTIONS-a The -a option tells the aoe driver to forget all unused devices.
EXAMPLEnai# aoe-stat | grep e12.0 e12.0 0.000GB eth1 down nai# aoe-flush nai# aoe-stat | grep e12.0
BUGSFlushed devices may reappear when they are discovered by the periodic discovery beacon. aoe-discover may be used to force this behaviour.
SEE ALSOaoe-stat(8), aoe-discover(8), aoetools(8).
AUTHORSam Hopkins (@coraid.com)
|This manual||Reference||Other manuals|
|refer to||aoe-discover(8) | aoe-stat(8)|