pragmatism first

BUS_ACTIVATE_RESOURCE(9FREEBSD) - Linux manual page online | System kernel interfaces

Activate or deactivate a resource.

May 20, 2016


bus_activate_resource, bus_deactivate_resource — activate or deactivate a resource


#include <sys/param.h> #include <sys/bus.h> #include <machine/bus.h> #include <sys/rman.h> #include <machine/resource.h> int bus_activate_resource(device_t dev, int type, int rid, struct resource *r); int bus_deactivate_resource(device_t dev, int type, int rid, struct resource *r);


These functions activate or deactivate a previously allocated resource. In general, resources must be activated before they can be accessed by the driver. Bus drivers may per‐ form additional actions to ensure that the resource is ready to be accessed. For example, the PCI bus driver enables memory decoding in a PCI device's command register when activat‐ ing a memory resource. The arguments are as follows: dev The device that requests ownership of the resource. Before allocation, the resource is owned by the parent bus. type The type of resource you want to allocate. It is one of: PCI_RES_BUS for PCI bus numbers SYS_RES_IRQ for IRQs SYS_RES_DRQ for ISA DMA lines SYS_RES_IOPORT for I/O ports SYS_RES_MEMORY for I/O memory rid A pointer to a bus specific handle that identifies the resource being allocated. r A pointer to the struct resource returned by bus_alloc_resource(9). Resource Mapping Resources which can be mapped for CPU access by a bus_space(9) tag and handle will create a mapping of the entire resource when activated. The tag and handle for this mapping are stored in r and can be retrieved via rman_get_bustag(9) and rman_get_bushandle(9). These can be used with the bus_space(9) API to access device registers or memory described by r. If the mapping is associated with a virtual address, the virtual address can be retrieved via rman_get_virtual(9). This implicit mapping can be disabled by passing the RF_UNMAPPED flag to bus_alloc_resource(9). A driver may use this if it wishes to allocate its own mappings of a resource using bus_map_resource(9). A wrapper API for bus_space(9) is also provided that accepts the associated resource as the first argument in place of the bus_space(9) tag and handle. The functions in this wrapper API are named similarly to the bus_space(9) API except that “_space” is removed from their name. For example, bus_read_4() can be used in place of bus_space_read_4(). The wrapper API is preferred in new drivers. These two statements both read a 32-bit register at the start of a resource: bus_space_read_4(rman_get_bustag(res), rman_get_bushandle(res), 0); bus_read_4(res, 0);


Zero is returned on success, otherwise an error is returned.


bus_alloc_resource(9), bus_map_resource(9), bus_space(9), device(9), driver(9)


This manual page was written by Warner Losh <>.
BSD May 20, 2016 BSD
This manual Reference Other manuals
bus_activate_resource(9freebsd) referred by bus_alloc_resource(9freebsd) | bus_alloc_resource_any(9freebsd) | bus_deactivate_resource(9freebsd) | bus_map_resource(9freebsd) | bus_unmap_resource(9freebsd) | pci(9freebsd) | pci_alloc_msi(9freebsd) | pci_alloc_msix(9freebsd) | pci_disable_busmaster(9freebsd) | pci_disable_io(9freebsd) | pci_enable_busmaster(9freebsd) | pci_enable_io(9freebsd) | pci_find_bsf(9freebsd) | pci_find_cap(9freebsd) | pci_find_dbsf(9freebsd) | pci_find_device(9freebsd) | pci_find_extcap(9freebsd) | pci_find_htcap(9freebsd) | pci_find_pcie_root_port(9freebsd) | pci_get_id(9freebsd)
refer to bus_alloc_resource(9freebsd) | bus_map_resource(9freebsd) | bus_space(9freebsd) | device(9freebsd) | driver(9freebsd) | rman_get_bushandle(9freebsd) | rman_get_bustag(9freebsd) | rman_get_virtual(9freebsd)
Download raw manual
Index BSD Kernel Developer's Manual (+1909) BSD (+3984) № 9 (+1939)
Go top