CUPS-LPD - reference manual online
Receive print jobs and report printer status to lpd clients.
cups-lpd(8) Apple Inc. cups-lpd(8)
NAME cups-lpd - receive print jobs and report printer status to lpd clients SYNOPSIS cups-lpd [ -h hostname[:port] ] [ -n ] [ -o option=value ] DESCRIPTION cups-lpd is the CUPS Line Printer Daemon ("LPD") mini-server that supports legacy client systems that use the LPD protocol. cups-lpd does not act as a standalone network daemon but instead operates using any of the Internet "super-servers" such as inetd(8), launchd(8), and systemd(8). OPTIONS -h hostname[:port] Sets the CUPS server (and port) to use. -n Disables reverse address lookups; normally cups-lpd will try to discover the hostname of the client via a reverse DNS lookup. -o name=value Inserts options for all print queues. Most often this is used to disable the "l" fil‐ ter so that remote print jobs are filtered as needed for printing; the inetd(8) exam‐ ple below sets the "document-format" option to "application/octet-stream" which forces autodetection of the print file format. CONFORMING TO cups-lpd does not enforce the restricted source port number specified in RFC 1179, as using restricted ports does not prevent users from submitting print jobs. While this behavior is different than standard Berkeley LPD implementations, it should not affect normal client operations. The output of the status requests follows RFC 2569, Mapping between LPD and IPP Protocols. Since many LPD implementations stray from this definition, remote status reporting to LPD clients may be unreliable. ERRORS Errors are sent to the system log. FILES /etc/inetd.conf /etc/xinetd.d/cups-lpd /System/Library/LaunchDaemons/org.cups.cups-lpd.plist NOTES PERFORMANCE cups-lpd performs well with small numbers of clients and printers. However, since a new process is created for each connection and since each process must query the printing sys‐ tem before each job submission, it does not scale to larger configurations. We highly recommend that large configurations use the native IPP support provided by CUPS instead. SECURITY cups-lpd currently does not perform any access control based on the settings in cupsd.conf(5) or in the hosts.allow(5) or hosts.deny(5) files used by TCP wrappers. Therefore, running cups-lpd on your server will allow any computer on your network (and perhaps the entire Internet) to print to your server. While xinetd(8) has built-in access control support, you should use the TCP wrappers pack‐ age with inetd(8) to limit access to only those computers that should be able to print through your server. cups-lpd is not enabled by the standard CUPS distribution. Please consult with your oper‐ ating system vendor to determine whether it is enabled by default on your system. EXAMPLE If you are using inetd(8), add the following line to the inetd.conf file to enable the cups-lpd mini-server: printer stream tcp nowait lp /usr/lib/cups/daemon/cups-lpd cups-lpd \ -o document-format=application/octet-stream Note: If you are using Solaris 10 or higher, you must run the inetdconv(1m) program to register the changes to the inetd.conf file. CUPS includes configuration files for launchd(8), systemd(8), and xinetd(8). Simply enable the cups-lpd service using the corresponding control program. SEE ALSO cupsd(8), inetd(8), launchd(8), xinetd(8), CUPS Online Help (http://localhost:631/help), RFC 2569 COPYRIGHT Copyright © 2007-2015 by Apple Inc.3 June 2014 CUPS cups-lpd(8)
|This manual||Reference||Other manuals|
|refer to||cupsd(8) | cupsd.conf(5) | hosts_access(5) | hosts_access(5)|