DPKG-BUILDPACKAGE - reference manual online
Build binary or source packages from sources.
dpkg-buildpackage(1) dpkg utilities dpkg-buildpackage(1)
NAME dpkg-buildpackage - build binary or source packages from sources SYNOPSIS dpkg-buildpackage [option...] DESCRIPTION dpkg-buildpackage is a program that automates the process of building a Debian package. It consists of the following steps: 1. It prepares the build environment by setting various environment variables (see ENVI‐ RONMENT), runs the init hook, and calls dpkg-source --before-build (unless -T or --tar‐ get has been used). 2. It checks that the build-dependencies and build-conflicts are satisfied (unless -d is specified). 3. If a specific target has been selected with the -T or --target option, it calls that target and stops here. Otherwise it runs the preclean hook and calls fakeroot debian/rules clean to clean the build-tree (unless -nc is specified). 4. It runs the source hook and calls dpkg-source -b to generate the source package (unless a binary-only build has been requested with -b, -B or -A). 5. It runs the build hook and calls debian/rules build-target, then runs the binary hook followed by fakeroot debian/rules binary-target (unless a source-only build has been requested with -S). Note that build-target and binary-target are either build and binary (default case, or if -b is specified), or build-arch and binary-arch (if -B or -G are specified), or build-indep and binary-indep (if -A or -g are specified). 6. It runs the changes hook and calls dpkg-genchanges to generate a .changes file. Many dpkg-buildpackage options are forwarded to dpkg-genchanges. 7. It runs the postclean hook and if -tc is specified, it will call fakeroot debian/rules clean again. 8. It calls dpkg-source --after-build. 9. It runs the check hook and calls a package checker for the .changes file (if a command is specified in DEB_CHECK_COMMAND or with --check-command). 10. It runs the sign hook and calls gpg2 or gpg to sign the .dsc file (if any, unless -us is specified or on UNRELEASED builds), and the .changes file (unless -uc is specified or on UNRELEASED builds). 11. It runs the done hook. OPTIONS -g Specifies a build limited to source and architecture independent packages (since dpkg 1.17.11). Passed to dpkg-genchanges. -G Specifies a build limited to source and architecture specific packages (since dpkg 1.17.11). Passed to dpkg-genchanges. -b Specifies a binary-only build, no source files are to be built and/or distributed. Passed to dpkg-genchanges. -B Specifies a binary-only build, limited to architecture dependent packages. Passed to dpkg-genchanges. -A Specifies a binary-only build, limited to architecture independent packages. Passed to dpkg-genchanges. -S Specifies a source-only build, no binary packages need to be made. Passed to dpkg-genchanges. Note: if what you want is simply to (re-)build the source pack‐ age, using dpkg-source is always better as it does not require any build dependen‐ cies to be installed to be able to call the clean target. -F Specifies a normal full build, binary and source packages will be built (since dpkg 1.15.8). This is the same as the default case when no build option is specified. --target=target --target target -Ttarget Calls debian/rules target after having setup the build environment and stops the package build process here (since dpkg 1.15.0). If --as-root is also given, then the command is executed as root (see -r). Note that official targets that are required to be run as root by the Debian policy do not need this option. --as-root Only meaningful together with --target (since dpkg 1.15.0). Requires that the tar‐ get be run with root rights. -si -sa -sd -vversion -Cchanges-description -mmaintainer-address -emaintainer-address Passed unchanged to dpkg-genchanges. See its manual page. -a, --host-arch architecture Specify the Debian architecture we build for (long option since dpkg 1.17.17). The architecture of the machine we build on is determined automatically, and is also the default for the host machine. -t, --host-type gnu-system-type Specify the GNU system type we build for (long option since dpkg 1.17.17). It can be used in place of --host-arch or as a complement to override the default GNU sys‐ tem type of the host Debian architecture. --target-arch architecture Specify the Debian architecture the binaries built will build for (since dpkg 1.17.17). The default value is the host machine. --target-type gnu-system-type Specify the GNU system type the binaries built will build for (since dpkg 1.17.17). It can be used in place of --target-arch or as a complement to override the default GNU system type of the target Debian architecture. -Pprofile[,...] Specify the profile(s) we build, as a comma-separated list (since dpkg 1.17.2). The default behavior is to build for no specific profile. Also sets them (as a space separated list) as the DEB_BUILD_PROFILES environment variable which allows, for example, debian/rules files to use this information for conditional builds. -j[jobs|auto] Number of jobs allowed to be run simultaneously, number of jobs matching the number of online processors if auto is specified (since dpkg 1.17.10), or unlimited number if jobs is not specified, equivalent to the make(1) option of the same name (since dpkg 1.14.7). Will add itself to the MAKEFLAGS environment variable, which should cause all subsequent make invocations to inherit the option, thus forcing the par‐ allel setting on the packaging (and possibly the upstream build system if that uses make) regardless of their support for parallel builds, which might cause build failures. Also adds parallel=jobs or parallel to the DEB_BUILD_OPTIONS environment variable which allows debian/rules files to use this information for their own pur‐ poses. The -j value will override the parallel=jobs or parallel option in the DEB_BUILD_OPTIONS environment variable. Note that the auto value will get replaced by the actual number of currently active processors, and as such will not get prop‐ agated to any child process. If the number of online processors cannot be inferred then the code will fallback to using an unlimited number. -J[jobs|auto] This option (since dpkg 1.18.2) is equivalent to the -j option except that it does not set the MAKEFLAGS environment variable, and as such it is safer to use with any package including those that are not parallel-build safe. -D Check build dependencies and conflicts; abort if unsatisfied. This is the default behavior. -d Do not check build dependencies and conflicts. --ignore-builtin-builddeps Do not check built-in build dependencies and conflicts (since dpkg 1.18.2). These are the distribution specific implicit build dependencies usually required in a build environment, the so called Build-Essential package set. -nc Do not clean the source tree. Implies -b if nothing else has been selected among -F, -g, -G, -B, -A or -S. Implies -d with -S (since dpkg 1.18.0). -tc Clean the source tree (using gain-root-command debian/rules clean) after the pack‐ age has been built. -rgain-root-command When dpkg-buildpackage needs to execute part of the build process as root, it pre‐ fixes the command it executes with gain-root-command if one has been specified. Otherwise, if none has been specified, fakeroot will be used by default, if the command is present. gain-root-command should start with the name of a program on the PATH and will get as arguments the name of the real command to run and the arguments it should take. gain-root-command can include parameters (they must be space-separated) but no shell metacharacters. gain-root-command might typically be fakeroot, sudo, super or really. su is not suitable, since it can only invoke the user's shell with -c instead of passing arguments individually to the command to be run. -Rrules-file Building a Debian package usually involves invoking debian/rules as a command with several standard parameters (since dpkg 1.14.17). With this option it's possible to use another program invocation to build the package (it can include space sepa‐ rated parameters). Alternatively it can be used to execute the standard rules file with another make program (for example by using /usr/local/bin/make -f debian/rules as rules-file). --check-command=check-command Command used to check the .changes file itself and any artifact built referenced in the file (since dpkg 1.17.6). The command should take the .changes pathname as an argument. This command will usually be lintian. --check-option=opt Pass option opt to the check-command specified with DEB_CHECK_COMMAND or --check-command (since dpkg 1.17.6). Can be used multiple times. --hook-hook-name=hook-command Set the specified shell code hook-command as the hook hook-name, which will run at the times specified in the run steps (since dpkg 1.17.6). The hooks will always be executed even if the following action is not performed (except for the binary hook). Note: Hooks can affect the build process, and cause build failures if their com‐ mands fail, so watch out for unintended consequences. The current hook-name supported are: init preclean source build binary changes postclean check sign done The hook-command supports the following substitution format string, which will get applied to it before execution: %% A single % character. %a A boolean value (0 or 1), representing whether the following action is being performed. %p The source package name. %v The source package version. %s The source package version (without the epoch). %u The upstream version. -psign-command When dpkg-buildpackage needs to execute GPG to sign a source control (.dsc) file or a .changes file it will run sign-command (searching the PATH if necessary) instead of gpg2 or gpg. sign-command will get all the arguments that gpg2 or gpg would have gotten. sign-command should not contain spaces or any other shell metacharacters. -kkey-id Specify a key-ID to use when signing packages. -us Do not sign the source package. -uc Do not sign the .changes file. --force-sign Force the signing of the resulting files (since dpkg 1.17.0), regardless of -us or -uc or other internal heuristics. -i[regex] -I[pattern] -s[nsAkurKUR] -z, -Z Passed unchanged to dpkg-source. See its manual page. --source-option=opt Pass option opt to dpkg-source (since dpkg 1.15.6). Can be used multiple times. --changes-option=opt Pass option opt to dpkg-genchanges (since dpkg 1.15.6). Can be used multiple times. --admindir=dir --admindir dir Change the location of the dpkg database (since dpkg 1.14.0). The default location is /var/lib/dpkg. -?, --help Show the usage message and exit. --version Show the version and exit. ENVIRONMENT DEB_CHECK_COMMAND If set, it will be used as the command to check the .changes file (since dpkg 1.17.6). Overridden by the --check-command option. DEB_SIGN_KEYID If set, it will be used to sign the .changes and .dsc files (since dpkg 1.17.2). Overridden by the -k option. DEB_BUILD_OPTIONS If set, and containing nocheck the DEB_CHECK_COMMAND variable will be ignored. DEB_BUILD_PROFILES If set, it will be used as the active build profile(s) for the package being built (since dpkg 1.17.2). It is a space separated list of profile names. Overridden by the -P option. Reliance on exported environment flags Even if dpkg-buildpackage exports some variables, debian/rules should not rely on their presence and should instead use the respective interface to retrieve the needed values. Variables set by dpkg-architecture dpkg-architecture is called with the -a and -t parameters forwarded. Any variable that is output by its -s option is integrated in the build environment. NOTES Compiler flags are no longer exported Between dpkg 1.14.17 and 1.16.1, dpkg-buildpackage exported compiler flags (CFLAGS, CXXFLAGS, FFLAGS, CPPFLAGS and LDFLAGS) with values as returned by dpkg-buildflags. This is no longer the case. Default build targets dpkg-buildpackage is using the build-arch and build-indep targets since dpkg 1.16.2. Those targets are thus mandatory. But to avoid breakages of existing packages, and ease the transition, it will fallback to using the build target if make -f debian/rules -qn build- target returns 2 as exit code. BUGS It should be possible to specify spaces and shell metacharacters and initial arguments for gain-root-command and sign-command. SEE ALSO dpkg-source(1), dpkg-architecture(1), dpkg-buildflags(1), dpkg-genchanges(1), fakeroot(1), lintian(1), gpg2(1), gpg(1).Debian Project 2015-07-05 dpkg-buildpackage(1)
|This manual||Reference||Other manuals|
apt.conf(5) | changestool(1) | cowpoke(1) | cvs-buildpackage(1) | cvs-debuild(1) | cvsdeb.conf(5) | debc(1) | debi(1) | debmake(1) | debsign(1) | debuild(1) | dh_make(1) | dpkg-architecture(1) | dpsch-auto-cronapt(1) | dpsch-gendepends(1) | dpsch-genpkg(1) | dpsch-installcronapt(1) | dpsch-listbinpkgs(1) | faked-sysv(1) | faked-tcp(1)
|refer to||dpkg-architecture(1) | dpkg-buildflags(1) | dpkg-genchanges(1) | dpkg-source(1) | gpg(1) | gpg2(1) | lintian(1) | make(1)|