FIREQOS-MATCH(5) - Linux man page online | File formats

QOS traffic match.

Built 04 Nov 2017
fireqos-match(5) 3.1.5 fireqos-match(5)


fireqos-match - QOS traffic match


{match|match4|match6|match46} optional-match-params


Writing match inherits the IPv4/IPv6 version from its enclosing class (see fire‐ qos-class(5)). Writing match4 includes only IPv4 traffic in the match. Writing match6 includes only IPv6 traffic in the match. Writing match46 includes both IPv4 and IPv6 traffic in the match. You can add as many match statements as you like to a FireQOS configuration. They assign traffic to a class: by default to the class after which they are declared. The sequence that matches appear in the configuration defines their priority, with the first match being given a prio of 10, with 10 added for each subsequent match (10, 20, 30, ...). Matches can have their priority assigned explicitly with the prio parameter. See fire‐ qos-params-match(5). If one match statement generates multiple tc(8) filter statements, all filters generated by the same match statement will have the same prio. Note match rules are attached to the parent of the class they appear in. Within the configuration they are written under a class, but in reality they are attached to their class parent, so that they classify the parent's traffic that they match, in‐ to the class. It is also possible to group all match statements together below the classes. This allows them to be arranged in preferred order, without the need for any explicit prio parameters. In this case however, each match statement must specify to which class it classifies the packets it matches, using the class parameter. See fireqos-params-match(5) and the exam‐ ples below. You can also write client and server statements, much like FireHOL allows, with the same service definitions. For FireQOS however, the client ports are ignored. server state‐ ments match the server ports on this linux side, while client statements match the server ports on the remote side. Example: server_myrtp_ports="10000:10100" interface eth0 lan bidirectional rate 1Gbit class voip server sip client sip server myrtp class dns server dns class mail server smtp


optional-match-params The set of optional parameters which describe this match. See fire‐ qos-params-match(5).


Match traffic within classes: interface eth0 lan output rate 1Gbit class voip match udp ports 5060,10000:10100 class dns match udp port 53 class mail match tcp port 25 Matches split out and explicitly assigning traffic to classes (N.B. without the class pa‐ rameters, all traffic would be classified into 'mail'): interface eth0 lan output rate 1Gbit class voip class dns class mail match udp ports 5060,10000:10100 class voip match tcp port 25 class mail match tcp port 80 class web


· fireqos-params-match(5) - QOS match parameters · fireqos(1) - FireQOS program · fireqos.conf(5) - FireQOS configuration file · fireqos-interface(5) - QOS interface definition · fireqos-class(5) - QOS class definition · FireHOL Website ( · FireQOS Online PDF Manual ( · FireQOS Online Documentation ( · tc(8) ( - show / manipulate traffic control settings


FireHOL Team.
FireQOS Reference Built 04 Nov 2017 fireqos-match(5)
This manual Reference Other manuals
fireqos-match(5) referred by fireqos-class(5) | fireqos-conf(5) | fireqos-params-match(5)
refer to fireqos(1) | fireqos-class(5) | fireqos-conf(5) | fireqos-interface(5) | fireqos-params-match(5) | tc(8)
Download raw manual
Main page 3.1.5 (+194) FireQOS Reference (+75) № 5 (+2141)
Go top